Skip to content
GullySales

Office park developers · CRM

Give each company requirement one record from the first call to the signed lease.

A CRM for an office park holds each company's requirement as a single record, with its stages, owners and dates. GullySales sets one up around how your leasing team actually works and keeps the data clean.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of real estate developers and brokers at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For office park developers

Where it usually goes wrong, and what we would do.

  • “A lease takes months and several hands”

    A requirement passes through the consultant's call, a tour, a test fit, a term sheet and legal review. Spread across inboxes and spreadsheets, the story cannot be read by anyone but the person who held it.

  • “The company, the consultant and the contact are three things”

    An enquiry carries a company, an adviser who brought it and several people on the occupier side. A flat contact list cannot hold that, and the dispute over who introduced whom is the result.

  • “Renewals need the same record as new leases”

    A tenant's lock-in end date sits in a lease folder that nobody opens. A CRM that holds tenants as well as prospects puts the date where the leasing head sees it.

What we do

What we deliver for office park developers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A record per requirement

    Headcount, timing, floor size, shortlist, tours, test fit, term sheet and lease on a single page with an owner.

    Result: Open any requirement and see its stage and owner.

  2. Company, adviser and contact linked

    The adviser who introduced each company and the date and time of that introduction, stored with the record.

    Result: A disputed introduction is answered from the record.

  3. Stages that match your leasing steps

    Stage names taken from your own process, such as toured, test fit issued and term sheet shared.

    Result: The pipeline reads the way your team talks.

  4. Tenants and lock-in dates

    Every tenant with lease start, lock-in end and renewal conversation noted.

    Result: The next lock-in to expire is one filter away.

  5. A clean-up of existing data

    Duplicate companies merged and old sheets imported with their source noted.

    Result: The team starts with one list, not three.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

What a leasing team records on each requirement and each lease.

Occupier, consultant and contact
Filled at the first call as three separate fields. Prevents the consultant from being logged as the occupier.
Floor size and readiness wanted
Filled by the leasing executive. Lets the team match the requirement to a floor or phase.
Tour date and attendees
Filled after each tour. Shows who saw the campus, and who must see it before a decision.
Test fit sent and version
Filled by the architect or leasing head. Shows which layout the occupier has and whether they came back with changes.
Term sheet stage and open points
Filled by the leasing head. Shows where a negotiation stands, and which point blocks the next step.
Renewal date and tenant contact
Filled at lease signing. Prompts a conversation before the term ends, with the facility manager's notes on the tenant.

Who it is for

This is written for these office park developers.

  • Global capability centres setting up in India
  • IT and IT-enabled services companies
  • Product and start-up companies taking half floors
  • Banks, insurers and financial services back offices
  • Engineering and design firms
  • Consultancies and professional firms
  • Co-working and managed office operators
  • Corporate real estate consultants and tenant advisers

Before you decide

When this may not be the right fit.

  • You lease very few floors and the leasing head holds every detail, so a record would be extra typing for now.
  • Nobody has agreed whether the consultant or the occupier is the named contact, so the record would confuse the two.

Before you decide

Agree the work. Know how to judge it.

CRM for office parks: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from office park developers. Anything missing is noted in the written scope, with who will supply it.

All spreadsheets with requirement details
Collect every sheet, notebook page and message list in which requirements have been tracked, even if they overlap. We load from them. Anything held only in a person's memory stays out of the first load, so the earlier it is written down, the more of it the record starts with. Include the dates of the last call or tour wherever you have them.
Lease documents for current tenants
Give us the key dates and floors from each lease: start, lock-in, renewal and any expansion option. Summaries from your own file are acceptable. They feed the renewal reminders. If a date is unknown, the tenant is loaded without a reminder and flagged for checking.
A list of advisers and brokers with contacts
Prepare a list of consultants and brokers, with the person's name, firm and the requirements they have brought. A phone export is enough. The CRM links them to each requirement. Without this list, advisers are entered as plain contacts and the history of who brought which deal is lost.
The leasing head's decision on access
Decide who sees what: whether brokers see anything, whether executives see all requirements and who can change a stage. Write it down in a few lines. Without the decision, every user has full access, and a confidential term sheet can be seen by people who should not read it.
Time from the leasing team for testing
The people who work requirements must spend hours in the test copy using real cases and saying what is awkward. Block this time before the build. If they cannot, we build on assumptions, and the team may fall back to spreadsheets once the new system is live.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Draw a lease from first call to signing

    With the leasing head, we draw one real lease on a page, from the first call through tour, test fit, term sheet and signing, naming who handled each stage. You show us where each paper was kept. What exists afterwards is the journey in your own words, which the CRM stages will follow. We also note the papers that change hands at each stage, such as the proposal, the test fit drawing and the draft heads of terms, so the record can hold a link to each.

  2. 2

    Agree what a record contains

    We decide what one requirement record holds: the company, the consultant, the contact, seats, preferred floors, the stage and the owner on your side. You choose the field names. Company, adviser and contact are separate items linked to the record, since the same consultant may bring several requirements and the same occupier may deal with more than one adviser over the years.

  3. 3

    Set the stages to match your leasing steps

    We name the stages in your terms: requirement received, tour done, test fit shared, terms exchanged, documents in preparation, signed. You decide which move needs a reminder and who owns it. Fewer stages are better, as long as each tells the leasing head what happens next.

  4. 4

    Clean the existing data before loading it

    We take the spreadsheets and contact lists you hold and remove duplicates, wrong spellings and contacts who have left. You decide what to keep. A test copy is loaded and the leasing team checks a sample against what they know. Only then is the cleaned list loaded for real.

  5. 5

    Add tenants, lock-in dates and renewals

    We load the current tenants with their floors, lease start and the dates on which a lock-in or renewal falls due. You confirm the dates against the lease documents. Renewal reminders follow these dates, and the same record that held the first requirement carries the tenant's later needs.

  6. 6

    Switch to the CRM and check the first view

    On an agreed date the leasing team starts working in the CRM and the old sheets are frozen. We check the first stage view against the count of live requirements noted before the change. You decide who owns data quality and what the leasing head reviews at each leasing meeting.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should an office park developer use?
The one your leasing team will update. We work with the tool you already have or suggest a common one in use in India. The record design matters more than the brand.
Can brokers see the CRM?
No. Brokers get the pack and a written introduction rule. The CRM holds commercial terms and tenant data, so access stays inside your team, with permissions set by role.
Does a CRM replace the leasing head?
No. It holds what the leasing head knows so that others can act when they are away. The tours, the negotiation and the relationship stay with your people.
What does the record hold for a renewing tenant?
The lease dates, the floors, the contacts, any complaint raised and how it was closed. A tenant that renews expects you to remember. The record lets the leasing head open the renewal conversation with the facts of the stay, not from scratch.
Which tool suits an office park developer?
One that can hold a company, a consultant and several contacts as separate linked items, handle documents and show a stage view that the leasing head can read at a glance. Beyond that, the choice depends on how many people use it, what you already pay for and whether it must connect to the site forms. We compare what you have against those needs and say plainly if a simpler tool would do. Check the vendor's current plans and terms before you commit.
Can brokers be given access to the CRM?
Not to the full system. A broker needs to see the status of the requirements they brought, and not other brokers' requirements or the terms offered to others. A safer arrangement is a report or a shared view limited to their own deals, which your leasing head controls. If you do give access, set it up so each broker sees only their records, and put it in writing who may see what before the first login is created.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.