Skip to content
GullySales

Skylight and polycarbonate roofing installers · Buyer persona

Find out whether the caller owns the terrace, keeps the society books or runs the shed before you quote.

A buyer persona for a roofing installer is a short description of the person who books a translucent roof, written from the sites you have already fitted. GullySales builds the cards with you and tests each one against your own enquiry register.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A team reviews audience profiles on a screen

What buyer persona means

A buyer persona is a plain description of the kind of customer who actually buys from you. It includes what they search, what worries them and who else they ask before deciding. GullySales builds this from real enquiries and past sales rather than a generic template, then uses it to write every page and advert.

Last updated 14 Nov 2026.

For skylight and polycarbonate roofing installers

Where it usually goes wrong, and what we would do.

  • “The caller who asks for a rate may not sign the order”

    A society secretary rings for a figure, yet the committee votes on it. A quote built around the secretary's phone call leaves out the drawing and the shed list the committee wants on the table.

  • “A homeowner fears the first monsoon more than the price”

    Someone replacing a leaking sheet over a passage has lived with drips. The card for this buyer opens with the joint, the flashing and who returns if water still comes in.

  • “An architect reads the frame detail before the rate”

    A specifier checking a stair-well skylight wants the section drawing, a past atrium and a fitter who will meet the structural engineer. A homeowner's explanation of light and heat only slows that conversation.

  • “A plant manager is protecting the production floor”

    Asking to swap shed sheets for daylight panels, the manager wants to know how the purlins are reached and whether the line keeps running. The card starts with the shift, not the look of the roof.

What we do

What we deliver for skylight and polycarbonate roofing installers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Cards for the homeowner, society secretary, architect and plant manager

    One page each, naming the question that buyer asks first, who else signs, and the document they expect to receive.

    Result: A set of cards the sales team reads before picking up the phone.

  2. A test of each card against your enquiry register

    Every card is held against the enquiries and orders in your own register, and the lines that do not match are corrected.

    Result: Cards that reflect your sites and not our guesses.

  3. An opening call for each buyer

    Three starting questions that differ for a dripping terrace, a committee quote and a shed with running machines.

    Result: A call sheet pinned beside the phone.

  4. A WhatsApp and photograph set for each buyer

    Sample-sheet pictures, joint close-ups and a short opener chosen to suit each card.

    Result: One message set for every buyer type.

How the result is measured

  • Enquiry match to persona
  • Conversion rate by persona
  • Content aligned to persona

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who is asking

Who rings a skylight or polycarbonate roofing installer, and what each of them needs answered before they book a visit.

Homeowner with a dripping terrace passage
Wants to know whether the old fibre sheet comes out before the next rains, what the new joint looks like and who returns if a drop appears.
Owner with a dark stair landing
Wants to see the skylight from below, hear how the glass or sheet is cleaned and learn how the frame keeps rain out.
Society secretary planning a parking shed
Wants a written quote, a drawing and a few past sheds to show a committee that meets once and decides on the day.
Architect specifying an atrium roof
Wants the section drawing, the sheet range and a fitter who will stand with the structural engineer on site.
Plant manager in an industrial estate
Wants to know how daylight sheets are set into the metal roof while the machines run, and who supervises the crew on the shed.
Contractor or sheet dealer
Wants sheet sizes, thickness options and a supply-only rate sheet, plus a plain answer on whether you also fit for their client.

Who it is for

This is written for these skylight and polycarbonate roofing installers.

  • Skylights for homes, atriums and stair landings
  • Polycarbonate sheet roofing for terraces and passages
  • Car parking sheds and covered walkways
  • Daylight sheets in factory and warehouse roofs
  • Polycarbonate sheds for schools, hospitals and campuses
  • Roof replacement of old fibre or cement sheet
  • Glass and aluminium skylight fabricators
  • Supply-only dealers of polycarbonate sheet and frames

Before you decide

When this may not be the right fit.

  • You have fitted too few roofs to see a pattern, so every card would be a guess about who books.
  • Calls and site visits are not noted anywhere, so no card could be tested against the people who rang.

Before you decide

Agree the work. Know how to judge it.

Buyer personas for skylight and polycarbonate roofing installers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Write the decision the research must support, such as entering a market or choosing a buyer group. Separate what you know from sales records from what the team currently assumes.

Make the scope clear

Agree which buyers to speak to, which sources to review, and what access you can provide. Include lost enquiries and people who chose another supplier, where they are willing to take part.

Check the work in use

Look for source dates, sample limitations, and evidence that disagrees with the preferred answer. A recommendation should show how it follows from the findings.

Know when to change course

Do not treat a few positive conversations as proof of demand. Test the proposed offer with an actual buying decision before committing to a wider launch.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from skylight and polycarbonate roofing installers. Anything missing is noted in the written scope, with who will supply it.

Your enquiry register for the last season
The register lets us test each card against real calls. A notebook is enough. Without it, the cards describe invented buyers and cannot be checked.
A list of the last roofs you fitted
Include the space, the town and the person who signed. Rough notes suffice. Without them, we cannot tell which buyer type brings the work.
Time with your site supervisor
The supervisor hears the objections that the office does not. A short, recorded talk is enough. If this is missing, the cards miss the worries that decide an order.
One or two society or factory contacts
Names of people who bought from you and might speak for a few minutes, or a note of what they said at handover. Without a contact, the society and plant cards rest on your recollection alone.
Which buyers you wish to win more of
Choose the buyer types you would like to win and those you would decline. Without it, the cards treat every caller as equal and the plan spreads thin.

How it works

How the buyer persona work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Go through the last fitted jobs one by one

    We sit with you and the enquiry register and list the last roofs you fitted: who asked, who decided, who paid and what they asked first. We mark the jobs where the person on the phone was not the person who signed. This gives the raw cases from which the cards are built.

  2. 2

    Ask your supervisor what each buyer worries about

    The supervisor hears the real doubts on site: will it leak in the first rain, will it be too hot, will the society allow it. We record these in the supervisor's words and attach each to the buyer who raised it. The doubts become lines on the cards.

  3. 3

    Write a card for each of four buyers

    We write one short card each for the homeowner, the society secretary, the architect and the plant manager. A card says who they are, what they fear, what they ask first, whom they consult and what proof they trust. You correct each card until it sounds like the people you have met.

  4. 4

    Test every card against the register

    We take each card back to the enquiry register and look for jobs that fit it. A card with no matching job is revised or dropped. A job that fits none shows a buyer we have missed. You read the revised set and mark what still feels wrong.

  5. 5

    Write the opening call for each buyer

    For every card we write how the phone is answered, what is asked first and what is offered next: a photograph request, a site visit, a frame sheet. The phone desk rehearses each opening. Wording that sounds scripted is rewritten in the desk's own style.

  6. 6

    Prepare the message and photograph set

    For each buyer we choose three finished-roof photographs and write the short WhatsApp message that goes with them. A society secretary sees a different set from a plant manager. Once these have been used, we compare the replies with the register and revise the cards. Replies from the secretary and the plant manager are read separately.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many buyer cards does a skylight and polycarbonate installer need?
Begin with the four who book: household, society, architect and factory. Add a contractor or dealer card only when your register shows supply-only callers arriving regularly.
How do I know a card describes my real buyers?
Lay it beside your recent sites. Write down who rang, who approved the quote and what they asked about the roof first, then edit the card wherever the sites say otherwise.
Can the cards guide advertising and my site crew?
Yes. They suggest the wording for a pre-monsoon message and the questions a supervisor asks on arrival. They are working sketches, so keep correcting them as new sites come in.
Does a shed owner buy differently from a terrace owner?
Yes. A terrace owner decides at home, wants a sheet in the hand and a finished roof to look at. A shed owner decides with a team around production, and wants a measured visit and a plan that keeps work going.
Do I need all four buyer cards from the start?
Four are enough to start: the homeowner, the society secretary, the architect or contractor and the plant manager. If you serve only factories, you may need two cards for different roles, such as the owner and the maintenance head. Add a card only when a real group of past enquiries fits no existing one. We start with the four, test them against your register and cut or split as the evidence shows. More cards than the phone desk can use only add paper that nobody reads.
Can the cards guide my advertising and my site crew?
Yes, but in different ways. For advertising, a card tells us which photograph and which first line suit each buyer. For your site crew, a card tells the supervisor what to say at the gate and what to show in the first minutes of a visit: a society secretary wants a written scope, a plant manager wants to know how production is protected. We turn each card into a half-page note for the crew. Whether the crew follows it is a matter of habit, so we practise it with them on real jobs.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.