Skip to content
GullySales

Bicycle stores · CRM

A cycle sold is a customer record that should still be earning at the next service.

A CRM for a bicycle store is a simple record of who bought which cycle, when it was sold, what was serviced and when it is due again. GullySales sets up a record your counter staff will actually fill in and reads it for service, upgrade and group opportunities.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Two bicycles displayed together

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For bicycle stores

Where it usually goes wrong, and what we would do.

  • “The bill is the only record and it sits in a drawer”

    The sale is written on a bill, the repair on a job card, and the number is saved under a first name on a phone. Nobody can list the buyers whose cycles are due, so the reminder never goes out.

  • “A child's cycle has a built-in return date”

    A seven-year-old outgrows a wheel size and needs the next one. A shop that knows the child's age and the cycle sold can message the parent when the time comes, and offer a trade-in before another shop does.

  • “Service history is a reason to stay”

    A rider whose cycle history sits with one workshop returns to it, because the mechanic knows the bike. When that record is only in the mechanic's head, it leaves when the mechanic does.

  • “Software nobody opens is worse than a notebook”

    A heavy system on a counter computer gets skipped when the shop is busy. A sheet or light tool with few fields, filled at billing, outlasts a rich tool that nobody has time to update.

What we do

What we deliver for bicycle stores.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A customer and cycle record

    One row per cycle sold: name, phone, cycle, size, sale date, service due and the child's age where known.

    Result: Each buyer can be found and filtered by what was sold.

  2. A service log

    Every repair and service written against the same record, with the work done and the date.

    Result: The mechanic sees what was done last time.

  3. A due-for-service view

    A filtered list of buyers whose service is due, ready for the reminder message.

    Result: Each reminder list is built from the record, not from memory.

  4. A trade-in and upgrade list

    Children near the next wheel size and riders on entry-level gears, flagged for a friendly message.

    Result: Upgrade conversations start from the record.

  5. A billing-time routine

    Three or four fields captured at the counter while the bill is made, with one person responsible.

    Result: The record fills as the shop trades.

  6. Consent noted on each record

    A note on whether the buyer agreed to receive messages, kept beside the number.

    Result: Reminders go only to people who agreed.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

A cycle record should carry what the shop needs at the next service.

Cycle model and frame number
Taken from the bill and the cycle. It lets the workshop find the record when the customer returns with a fault.
Rider's age and height at purchase
Recorded at billing. A child outgrows a cycle in a year or two, which is when the family needs a larger one.
Date of sale and first service due
Entered by the counter. It sets the first reminder and brings the cycle back to your workshop.
Service history
Added by the mechanic after each job. It shows the customer's cycle is looked after and helps diagnose a repeat fault.
Group or club name
For buyers from a school or a riding group. It tells you who to contact for the next bulk order.

Who it is for

This is written for these bicycle stores.

  • Neighbourhood cycle shops selling kids' and adult bicycles
  • Gear cycle and mountain bike specialists
  • Electric bicycle dealers
  • Road bike and performance cycling shops
  • Cycle repair and servicing workshops
  • Cycle spares and accessories shops
  • Shops supplying school transport and fitness groups
  • Cycle rental and tour operators selling used cycles

Before you decide

When this may not be the right fit.

  • Bills are written by hand and nobody will type them in later
  • You plan to use the list to message people who never gave a number to be used
  • The shop has few repeat customers yet

Before you decide

Agree the work. Know how to judge it.

CRM for bicycle stores: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from bicycle stores. Anything missing is noted in the written scope, with who will supply it.

Bill books and billing software export
A copy or photographs of the bill books, or an export if the billing software has one. We build the first list from them. If bills carry no phone numbers, the list starts small, and the first work is collecting numbers at the counter. Include any bills that carry the buyer's phone number, since these are the first rows we can fill.
The repair diary
Whatever the workshop writes about jobs, even loose slips. It shows which customers come back and what for. If the workshop keeps nothing, the log starts empty, and history builds from the day the routine begins. Add a rough note on which jobs you remember as repeat visits, since the diary alone may not show them.
A staff member to own the routine
One person, the counter assistant or whoever does the billing, who is answerable for each bill having a row. The owner may be too busy. If nobody owns the routine, rows are filled on slow days only, and the due-for-service view shows a partial truth. Choose someone present at billing time, not someone who works in the back, so that the row is filled while the customer is there.
Your wording for the consent line
A line the counter staff say and a place to tick, which asks whether the shop may send service reminders. We draft it, and you or your own adviser approve it. Without an agreed line, numbers are held but never used for messages. Show it to the counter staff first, since a line they cannot say naturally will not be said at all.
Details of trade-ins and upgrades
What the shop does when a child outgrows a cycle: buy back, exchange, or nothing. The trade-in list depends on your policy. If there is none, the list records who might want to upgrade, and the offer is decided later by you. Add whether the shop would hold a used cycle for resale, since that changes what the upgrade list is for.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Photograph the billing books and the diary

    We collect the bill books, the repair diary and any phone contacts the staff keep, and photograph them page by page. You tell us which book is the trusted one when two disagree. The photographs are the raw material for the first customer list, and nothing leaves the shop. We also record the date range each book covers, so that gaps are known.

  2. 2

    Decide what one customer row holds

    You and we agree the few facts worth keeping for each customer: name, phone, the cycle bought, the date, the size, and the date the first service is due. Anything beyond that is left out for now. The row is short enough to fill at the counter. We write the fields on one sheet of paper and stick it beside the billing counter.

  3. 3

    Set the billing-time routine at the counter

    At the moment of billing, the counter staff ask for the number, note the consent and fill the row. We time this on real bills and trim until it takes less effort than writing a bill. You decide who is answerable for a bill that leaves without a row. We also write the sentence for a customer who prefers not to give a number, so staff are not awkward.

  4. 4

    Build the service log from the repair diary

    We turn the repair diary into a log that shows each cycle with its jobs and dates, so the mechanic can see history before opening a toolbox. You check a sample against what the mechanic remembers. A log that disagrees with the mechanic is corrected on the spot. We also add a field for the frame number, since it settles questions about which cycle came in.

  5. 5

    Prepare the due-for-service view

    From the sale dates we make a view of cycles whose first service is due, and a child's cycle approaching a size change. Counter staff try it for a few days. You decide which of these you want as a call and which as a message. We also mark children's cycles with the age at purchase, so the view shows who is likely to need a larger size.

  6. 6

    Compare the record with what the bills showed

    After some weeks of use, we count rows filled, services booked from the due view and upgrades offered, and set them against the figures taken from the bills at the start. You read which fields helped and which only added work, and decide what to drop. We also ask the counter assistant which fields they skip, because those are the ones to remove.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not at the start. A shared sheet with the right fields can run a small shop. We move to a tool only when the sheet stops being enough, and we pick one your team will use.
What if our billing software already stores customers?
Then we use it. We check whether it records the cycle, the size and the next service date. If not, we add a simple sheet beside it rather than replace what the shop is used to.
How do we keep the data private?
Keep the record with the owner or manager, share access only with those who need it, and message only people who agreed. Data rules change, so check with your own adviser for what applies to you.
Do we need to ask consent before saving numbers?
Tell the customer at billing that the number will be used for service and offers, and note it. A buyer who agrees can be messaged. One who declines gets only the bill. Keep the records private and delete on request.
Can we keep this in a spreadsheet instead of software?
Yes, and for a single shop it is a sound start. A spreadsheet with one row per cycle sold, a column for the phone, one for the due date and one for the consent works well if one person owns it and it is backed up. We help you decide when to move to software, which is when the shop has outgrown a sheet or several people edit it at once. Billing software stores names, but seldom the due date for a first service or the child's age, which are the facts that matter here. We look at what your software exports and add only the missing columns to a separate sheet, so you keep a single source for bills and a small sheet for follow-up.
Who may see the customer list?
Only the staff who need it, and you decide who. Keep the list on a device with a lock, not on a loose paper left on the counter. Do not share it with makers, dealers or other shops without the customer's agreement. Check with your own adviser about the rules on storing personal data, because they change and differ for different kinds of data. Tell customers why you ask for the number, ask at the counter, and note the answer on the row. Do not send messages to anyone who did not agree. If a customer asks you to delete their details, do so and note the date. Check with your own adviser about the rules on storing personal data, because they change.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.