Bicycle stores · Follow up systems
The cycle was sold on Sunday, and the first service is the next time the buyer thinks of you.
A follow-up system for a bicycle store is the set of messages and calls that go to a buyer after the sale, the repair or the enquiry that did not close. GullySales works on who sends what, at which moment in the buyer's cycle ownership, and how a reply is handled.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What follow up systems means
A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.
Last updated 14 Nov 2026.
For bicycle stores
Where it usually goes wrong, and what we would do.
“The enquiry that did not buy still wants a cycle”
A parent who came in and left said they would think about it. If nobody writes again, the child gets a cycle from the next shop. One message with the size and the models discussed keeps the shop in the conversation.
“The first service is the moment trust is built”
A new rider whose seat has slipped or whose brakes need tightening is checking whether the shop cares after the sale. A message offering the first adjustment turns a purchase into a relationship.
“Repair pick-up is a follow-up in disguise”
When a cycle is ready, a message with a photo and a note on what was done brings the owner in and leaves a record. Silence turns a finished job into a cycle sitting in the corner.
“Seasonal follow-up needs a reason”
A message before summer holidays or before the rains is useful when it offers something: a check, a slot, a new arrival. One that only says hello is skipped, and a surplus of them gets the number blocked.
What we do
What we deliver for bicycle stores.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A follow-up map from sale onwards
A short list of moments after a cycle is sold: handover, first adjustment, service due, outgrown size, plus the message for each.
Result: Every sale has a planned set of next contacts.
A follow-up for open enquiries
A message to people who asked but did not buy, with the models discussed and a next step.
Result: Open enquiries get a second contact instead of silence.
A repair-ready message
A short note with a photo when the repair is done and a pick-up time.
Result: Finished jobs do not sit uncollected.
A seasonal message set
Messages for the holidays, birthdays and festivals, each carrying an offer or a service slot.
Result: Each seasonal push gives the reader something to act on.
A reply owner and a stop rule
One person who answers replies, and a rule for who is not messaged again once they opt out.
Result: Replies get answered and opt-outs are respected.
A follow-up tally
A count of messages sent, replies received and visits or bookings that followed.
Result: You can see which follow-ups bring people back.
How the result is measured
- Follow-up completion rate
- Average number of follow-ups before close
- Enquiries closed after repeat follow-up
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
Plan the message for each moment between an enquiry and the next service.
- Reply to an enquiry that did not buy
- A message after a visit, naming the cycle the buyer looked at and any change in price or stock.
- First service reminder
- A message near the time the first service is due, with the workshop hours and a way to book.
- Repair ready note
- A message that the cycle is ready, with the amount to pay and the closing time. It avoids wasted visits.
- Outgrown-cycle prompt
- A message to a family whose child has grown, offering an exchange or a larger size.
- Ride event invitation
- A note to riders on the list about a group ride or a test day, with a person to confirm with.
Who it is for
This is written for these bicycle stores.
- Neighbourhood cycle shops selling kids' and adult bicycles
- Gear cycle and mountain bike specialists
- Electric bicycle dealers
- Road bike and performance cycling shops
- Cycle repair and servicing workshops
- Cycle spares and accessories shops
- Shops supplying school transport and fitness groups
- Cycle rental and tour operators selling used cycles
Before you decide
When this may not be the right fit.
- You have not recorded when each cycle was sold
- No one has time to answer replies to reminders
- You plan to send the same message to everyone on the list
Before you decide
Agree the work. Know how to judge it.
Follow-up systems for bicycle stores: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.
Make the scope clear
Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.
Check the work in use
Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.
Know when to change course
If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from bicycle stores. Anything missing is noted in the written scope, with who will supply it.
- Customer phone numbers with consent
- The numbers you hold, with a note of who agreed to messages. Customers who never agreed are not messaged. If consent was never asked, the first task is asking at the counter, and the system starts with the numbers collected from that day. Add the source of each number, such as bill, chat or walk-in, because a number given for a repair may not be meant for sales messages.
- The sale and service dates
- Dates of sale for each cycle and of the last service, from bills or diary. Messages are timed from them. Without dates, reminders are guesses, and a customer reminded of a service they had last week loses trust in the shop. Include the child's age or the rider's height if you hold it, since the follow-up for a size change depends on it.
- Notes on enquiries that did not buy
- What the customer wanted, what the shop quoted and why they left, if known. The follow-up answers the reason. If nothing was noted, messages ask an open question first, and a longer conversation follows before the shop can make an offer. A one-line note for each is acceptable, and so is a photograph of the page in the counter diary.
- A named sender for every message
- One person who sends the messages and answers replies, with a stand-in. A reminder that draws a question and no reply does damage. Without a named sender we write the messages but do not set them running. Say whether replies come to the shop number or the owner's phone, so that none are lost when staff change.
- Your seasonal calendar
- The times you sell more, such as school reopening, summer holidays and festivals, and those you repair more, such as the first rains. Seasonal messages have a reason only if they match these. Without the calendar they read like noise. Mark which weeks are busy in the workshop, so that reminders do not bring customers in when no mechanic is free.
How it works
How the follow up systems work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
List who bought, who asked and who left
From the bills, chats and the counter diary we make three lists: buyers in the last season, enquirers who did not buy, and repair customers. You mark the ones you want to reach again. These lists are the base every message in the system is sent against. We also check the numbers for duplicates so one customer is not messaged twice.
- 2
Draw the follow-up map from the sale
With you we draw what should follow a sale: a thank-you, a check on how the child is riding, the first service, a seasonal note. Each step names its message, its sender and its reason. A step with no reason is removed before it is tested. Each step also carries the words the sender may not use, such as a promise of price or delivery.
- 3
Write the open-enquiry follow-up
For people who asked and did not buy, we write a short message that answers what stopped them, such as the size, the colour or the price. You approve each message. We also set how many are sent and when the system stops. A message that sounds like a pushy salesperson is rewritten until it sounds like the shop's counter.
- 4
Draft the repair-ready message with the workshop
The head mechanic and we write what the customer is told when a cycle is ready: what was done, what to watch, the pick-up hours. We agree the wording that suits your shop. The message is tested on three real repair jobs before it is adopted. We also decide whether a photograph of the repaired cycle goes with the message, with the customer's consent.
- 5
Choose the sender and the stop rule
You decide who sends the messages, whether the owner, the counter person or a family member, and what the sender may promise. We also write the stop rule: the point at which a customer who has not replied is left alone. The rule is written on paper at the counter. We also decide what happens when the customer replies after the system has stopped, so no reply goes unanswered.
- 6
Count replies and bookings against the sale book
We count the replies, bookings and first services booked through the messages, and compare them with the first services recorded in the sale book before the system began. You read which messages worked, which annoyed and which were ignored, and adjust or retire them. We also read which enquiries came back months later, because they show how long a buyer in your area takes to decide.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
How many follow-ups should someone who did not buy get?
Will reminders annoy customers?
Who should send these messages?
What should we say to a customer who bought elsewhere?
How should we word a reminder to a customer who bought elsewhere?
Will reminders about the first service feel like pressure?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for bicycle stores
Related work to consider.
Closest to this: leads and follow-up
Also for bicycle stores
Or start from the overview: sales and marketing for bicycle stores.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.