Skip to content
GullySales

Water cooler and dispenser dealers · CRM

Keep a record of every cooler installed, so the renewal call knows the floor and the date.

A CRM for a water cooler dealer is a simple record of every enquiry, quotation, installation and service contract, so a complaint, a renewal or a new block starts with facts. GullySales sets up the fields, the sheet or the software and the habit of filling it, and starts with what your team will keep up.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A sales team agreeing pipeline stages before a CRM is configured

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For water cooler and dispenser dealers

Where it usually goes wrong, and what we would do.

  • “The service diary is in a technician's notebook”

    The next visit lives in one person's handwriting. When they leave or are ill, the contract goes unattended.

  • “Contracts end without a flag”

    Nobody lists contracts by end date. The institution moves to another supplier and the dealer finds out at the next hot season.

  • “Contacts change and the file does not”

    An administrator retires and a new one arrives. The dealer calls the old name and the quotation goes to a stranger.

What we do

What we deliver for water cooler and dispenser dealers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A site and unit record

    Fields for institution, contact, floor, unit type, serial number, install date and contract end date.

    Result: A sheet that answers a complaint call in seconds.

  2. An enquiry and quotation log

    A single list of requests, quotations sent, follow-up dates and outcomes.

    Result: A view of quotations waiting for a reply.

  3. A renewal calendar

    A list of contracts by end date with the contact and the last visit note.

    Result: A list the owner can read at the start of the season.

  4. A rule for who fills what

    Sales writes the quotation, the technician writes the visit, the owner reviews the list.

    Result: A one-page habit that survives a staff change.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to record, and when

What a cooler dealer should write down at each step, and why it is worth the minute.

Institution, site and contact
Written by sales at the first call. It tells you who to ring about a renewal and lets you update the name when the person changes.
Users and floors served
Written at the site visit. It supports the sizing and explains the quote later if the institution questions it.
Unit model and serial number
Written by the technician on installation day. It is the first thing asked for on a warranty or repair call.
Contract start and end date
Written when the contract is signed. It drives the renewal list and shows which sites are due.
Visit notes and parts used
Written by the technician after each visit. It shows what failed and when, and supports the next quotation.
Do you need software yet?
Not while one sheet and two people suffice. Choose software when renewals and several users make the sheet slow.

Who it is for

This is written for these water cooler and dispenser dealers.

  • Commercial water cooler suppliers for schools and colleges
  • Dispenser dealers for offices and bank branches
  • Suppliers of coolers with filtration for factories and industrial estates
  • Water cooler dealers for railway and bus stations and public places
  • Hospital and hostel drinking-water point suppliers
  • Bottle-fed and bottle-free dispenser dealers
  • Water ATM and community drinking point installers
  • Service-only companies with annual maintenance contracts

Before you decide

When this may not be the right fit.

  • Nobody in the team is willing to log a visit, so a new system would hold empty fields.
  • You make only one-off sales with no service contract, and have no later contact with the buyer to record.

Before you decide

Agree the work. Know how to judge it.

CRM for water cooler and dispenser dealers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from water cooler and dispenser dealers. Anything missing is noted in the written scope, with who will supply it.

The technician's notebook or service sheets
The pages recording visits, filters and complaints. Photographs are enough. They form the first records. If they are lost, the history begins from today and we flag older sites as unknown. Pages from the last busy season carry weight, since those sites are the likeliest to call again.
A copy of every live service contract
Paper or scanned, with the site, dates and what is covered. Contract end dates drive the renewal list. If dates are missing, a renewal is not flagged and an expiry may be missed. Contracts that have lapsed should be kept in the same pile and marked, because a lapsed site is the first renewal call.
The invoice or dispatch register
It shows what was sold, to whom and on what date, and links a unit to a site. Without it, the unit record has gaps and a warranty claim cannot be checked against a sale. Where an invoice carries the serial number of the unit, we copy it into the unit record so a warranty question can be checked against the sale.
A decision on sheet or software
Tell us your budget and whether staff are comfortable with a shared sheet. If you do not choose, we recommend the simplest option that your coordinator will open each morning. A tool nobody opens is worse than paper. The choice affects who can open the record from a site, so tell us whether technicians carry smartphones or only keypad phones.
A named person to keep the record
One employee responsible for checking that entries are made and corrected. We also need a stand-in. If nobody owns the record, it ages and the renewal view shows wrong dates. We also ask this person to check a handful of records against the paper each time a new batch is entered, so errors are found early.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect the technician's service diary pages

    We start by gathering what is written down today: the notebook the technician carries, the invoice book, the contract file, WhatsApp threads with sites. We photograph pages and copy only what is needed. You tell us which books are the master record. The result is a single pile of facts about units, sites and service visits from which the fields are chosen.

  2. 2

    Choose the fields with your coordinator

    We sit with the person who answers calls and ask what they look up when a school rings about a leaking tap or a plant asks about renewal. Those answers decide the fields: site, contact, unit model, installation date, filter change, contract end. You cut anything your staff will not fill. A short list that is filled beats a long list that is empty.

  3. 3

    Move the active contracts in first

    We enter the sites under a live service contract before older sales, because those are where a missed visit hurts. Each record gets the contact, the unit, the contract dates and the last visit. You or your coordinator check a sample against the paper. After this step, a renewal can be read from the sheet instead of from memory. Contracts whose paper has gone missing are marked unverified rather than guessed.

  4. 4

    Set the rule for who fills what

    We write a one-page rule naming who adds an enquiry, who logs a quotation, who updates after a visit and who closes a contract. The technician's entry can be a phone form or a voice note typed by the coordinator. You confirm the rule with the staff in the room. A field with no named owner will stay empty.

  5. 5

    Build the renewal and follow-up view

    From the records we make a list that shows contracts approaching end, quotations without a reply and sites with no service on file. You decide who reads it and how it is used in meetings. The list changes with the records, so it stays accurate only while staff enter data.

  6. 6

    Compare the record with the old paper counts

    We check the sheet against the number of enquiries, quotations and contracts you counted from the books before we began, to find what was missed in the move. You tell us which questions the record answered that the paper could not. Gaps are listed for repair. We do not promise a rise in renewals, only that each contract is visible.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will a plain sheet do, or is software required?
A sheet is enough while one or two people fill it. Move to software when several staff handle quotations or when you want reminders sent to contacts who agreed.
What if technicians will not fill it in?
Make the entry part of closing the visit: the job is not complete until the sheet is updated. Keep the form to a few fields and let it be filled on a phone.
Can WhatsApp chats be our record?
Not alone. A chat is hard to search and leaves with the phone. Copy the key facts into the sheet, and keep chats for talking.
Who owns the customer data?
The business does, so keep it in an account you control. Collect only what you need, note consent for reminders and follow the current data protection rules.
Do we need to enter every old customer?
No. Start with sites under a live contract and those serviced recently, then add buyers from the invoice book as time allows. Entering decades of old sales delays the useful part and fills the sheet with sites that no longer exist. We mark records as active, lapsed or unknown, so a past buyer can be found if they call. You decide how far back to go, and we advise stopping where the paper becomes unreadable.
Can the sheet be shared with the technicians on site?
Yes, through a phone form or a shared sheet that shows only what they need, such as the site, the unit and the last visit. They add the visit note and the filter change. We set permissions so that a technician cannot delete contract records or see rates. If a technician cannot use a phone form, the coordinator can enter the paper slip the same evening. The rule matters more than the tool.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.