Skip to content
GullySales

Tyre dealers · Follow up systems

Call the owner when the tyres are due, before another shop does.

A follow-up system for a tyre dealer is the set of calls and messages sent after an enquiry, a quotation and a fitting. GullySales writes the steps, assigns each to a named person and builds the list that starts each day.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Tyre dealers: show a real physical business scene illustrating Stock by size, brand and pattern. Count each size, brand, pattern and load rating with its rack location and reorder level, so the counter answers from the screen rather than a walk to the rack.

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For tyre dealers

Where it usually goes wrong, and what we would do.

  • “The quotation that is never chased”

    A fleet manager asks for a quote, receives it, and hears nothing more. Three weeks later the fleet has bought elsewhere. One call asking whether the figures were clear is the whole system, and it is skipped.

  • “The enquiry that went cold at the counter”

    A caller asks the price of a size, is told it, and says they will come later. Without a note, nobody calls back. A name and number on the sheet and a call the next morning is a different shop.

  • “After the fitting is when trust is made”

    A message two days after the fitting asking whether the car feels right shows the owner someone is accountable. A complaint caught here is fixed; a complaint missed becomes a bad review.

  • “The due date is a reason to call”

    Alignment and rotation have natural points when the owner should return. A call that says the tyres fitted are due for a check is a service, not a sales push, if it is brief and sent to people who agreed.

What we do

What we deliver for tyre dealers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Enquiry follow-up steps

    A short sequence for price enquiries: reply, note the size, call back the next morning, record the result.

    Result: Each enquiry ends as booked, lost or parked, with a reason.

  2. Quotation chase for fleets

    A set of steps after a quotation is sent: confirm receipt, answer questions, visit the depot, record the decision.

    Result: No fleet quotation is left without an outcome.

  3. After-fitting check

    A message to the owner after the fitting asking whether anything feels off, with a number to call.

    Result: Problems reach you before they reach a review site.

  4. Due-date reminder messages

    Short reminders in the owner's language for rotation, alignment or replacement, sent only to owners who agreed.

    Result: The right owners are reminded at the right time.

  5. Morning follow-up list

    A list at the start of the working day of the calls to make, with names, numbers and the reason for each.

    Result: The counter starts the day knowing whom to call.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Each step after an enquiry has a reason, a message and a note on the sheet.

Price given, no answer yet
A short message asking whether the buyer still needs the fitting, with the same price repeated. Note the reply or the lack of one on the sheet.
Quotation sent to a fleet
A call to the manager to ask what is needed to decide, such as a trial on one vehicle. Record the next step and who owns it.
Tyres fitted today
A message the same evening asking if the vehicle drives straight and quietly. It is an after-fitting check, and it catches a problem you can still fix.
Alignment suggested and declined
Note that it was offered and why it was refused. Mention it again at the next visit without pressing.
Tyres due for rotation or replacement
A reminder tied to the last fitting date and reading, sent only to buyers who agreed. Say which vehicle and which service.
Buyer said later
Write the date they named and call then. Do not chase before that, and close the line when the date passes with no reply.

Who it is for

This is written for these tyre dealers.

  • Multi-brand passenger car tyre shops
  • Two-wheeler tyre and puncture shops
  • Truck and bus tyre dealers
  • Authorised brand tyre showrooms
  • Tyre retreading shops
  • Tyre and alignment centres that offer balancing and wheel care
  • Fleet tyre suppliers who serve transport companies
  • Tractor and farm tyre dealers

Before you decide

When this may not be the right fit.

  • No one is named to run the morning list, so every step written down would depend on whoever is free
  • The counter has no record of what was quoted, so a follow-up would repeat a price you cannot prove

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for tyre dealers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from tyre dealers. Anything missing is noted in the written scope, with who will supply it.

Quotation slips and messages
Bring the notebook, slips or message threads where quotes are written. We need the buyer, the tyre and the figure. Quotes that exist only in memory cannot be chased, and the first rule becomes writing every quote down. Photographs of the slips are acceptable, so long as the figure and the date are readable.
A record of missed calls
Your phone log is enough. It shows when calls arrive and which go unanswered. Without it, we begin by counting for a short spell.
A named owner for follow-up
One person must own the list, and a backup must cover. If the fitter is the only one, the list will not be read. We choose the holder with you.
Your limit on contacting a buyer
Decide how many times you will contact a buyer about one quote. A limit protects goodwill. Without your decision, we write for one message and one call. Include the stop rule for buyers who have said no.
The vehicle sheet or bill book
Reminders need the last fitting date. If you have no record, we start one and reminders follow later. Even a page torn from the bill book with the date and the tyre will let us time the first reminders.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the quotations that were never chased

    We go through the quotation slips, messages and the notebook for quotes given without a reply, and mark each as sold, lost or unknown. You recall the buyers who said they would call back. These open quotes are the first people the follow-up reaches. We also note what each buyer was told about stock, since a quote given for a size that was out of stock is chased differently from one that was ready.

  2. 2

    Write the steps for a cold enquiry

    For an enquiry that went quiet at the counter, we draft a simple sequence: a message after the quote, a call if the buyer replied, and a stop. You choose how many times the shop contacts a buyer. The sequence never pressures and ends when the buyer says no. A buyer who replied to the first message gets a call from the person who quoted; one who did not is left alone after the last step.

  3. 3

    Draft the fleet quotation chase

    A fleet quotation waits on approvals, so the chase is a polite check of where it stands and who decides. We write the note and the call script with you. You choose who handles fleets, since the relationship matters more than the speed. We ask who at the fleet signs the purchase and who uses the vehicle, as the two are rarely the same person.

  4. 4

    Set the after-fitting check

    After a fitting, a short message asks if the vehicle rides as expected and reminds the buyer of the alignment or pressure check if one was advised. We draft it for your approval. A buyer with a complaint receives a call from you, not a standard reply. If the buyer reports a pull to one side or a vibration, the message routes them to the bay and not to a reply.

  5. 5

    Schedule due-date reminders from the sheet

    From the vehicle sheet, we pick the tyres nearing replacement by date or by reading, and write the reminder message. You approve the wording and the list. Buyers who declined contact are skipped.

  6. 6

    Print the follow-up list for the morning

    Each opening of the shop starts with a list of people to call: missed calls, quotes to check, reminders due. We design the sheet with you. You assign an owner. At the end we compare calls made and fittings booked with the starting figures.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who should make the follow-up calls?
One named person. When everybody is responsible, nobody calls. Give the list to the counter hand who knows the customers and make the call part of the morning routine.
When do we stop chasing a quotation?
Chase until the buyer says yes, no or later, and record which. A buyer who says later needs a date to be called. Repeating the same message with no new reason annoys the buyer, so give each call a purpose.
Can we message a buyer who only asked a price?
Reply to the enquiry and follow up on that one price, since the buyer started the conversation. Do not add the buyer to offer lists or broadcasts without a yes. Keep the follow-up to the quote and the slot, and stop when the buyer says no.
How do we follow up a fleet whose approval takes long?
Ask the manager who signs and what that person needs to see, then supply it. Fleet purchases pass through an approver, so a call to the right person helps more than repeat calls to the contact. Record each step on the fleet's line.
Is it acceptable to message a buyer who only asked for a price?
Reply to the message they sent, and keep it to that conversation. If they asked on WhatsApp, a single follow-up asking whether they have questions about the quote is fair. Adding them to a promotion list without asking is not. Offer to remind them when the tyres are due and let them say yes. The platform's current rules also limit messages to people who have not agreed, so check them first.
How long should a fleet quotation stay open?
When the fleet says no, or when the person who decides has changed and the new one has not replied after your agreed number of attempts. Fleet approvals can be slow, so a polite check of where the quote stands is normal. Set a stop rule with the owner, record it on the sheet, and revisit the account when the fleet next buys.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.