Tyre dealers · Lead generation
Fill the bay with owners who already know the size they need.
Lead generation for a tyre dealer means getting a named car owner, rider, driver or fleet manager to ask for a price, a slot or a quotation. GullySales works on the sources of those enquiries and on the record that shows which source sent which buyer.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Plan the next part of the work
Last updated 21 Nov 2026.
For tyre dealers
Where it usually goes wrong, and what we would do.
“The best enquiry arrives with a size”
A buyer who types 185/65 R15 into a message is ready to buy. A buyer who only asks about tyres is comparing. Sorting these two at the first reply decides whether the counter staff spend the afternoon on buyers or on browsers.
“Three kinds of buyer, three different routes”
A rider walks in when a puncture strikes. A car owner searches by size and locality after a mechanic's warning. A transporter waits for a visit from someone who knows trucks. One lead plan for all three wastes effort on each.
“Garages see the worn tyre first”
A service centre lifts the car and notices the bald tread before the owner does. The garage that recommends your shop is a lead source, and without a record of who sent whom, nobody is thanked and the habit fades.
“Fleet leads sit on lists, not on search results”
A depot with a dozen trucks does not search for tyres on a phone. Transport companies, school bus contractors and delivery hubs are found by walking the industrial roads and writing names down, then calling with a reason.
What we do
What we deliver for tyre dealers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Size-and-vehicle enquiry form
A short form and a WhatsApp opening message that ask vehicle model, tyre size and whether the owner wants fitting today.
Result: Every enquiry arrives with the size attached, so the first reply is a price.
Lead source sheet
A register where each call, message and walk-in is tagged by source: search, garage, driver stand, fleet visit, pamphlet.
Result: You can read which source produced the bookings you counted.
Garage referral list
The service centres and mechanics near you, with a note of who recommended tyres and what was bought.
Result: A garage owner can be thanked by name for the buyers sent.
Fleet prospect list
Transporters, bus operators and delivery hubs within reach, with vehicle counts noted after the first visit.
Result: The next depot visit is chosen from a list, not from memory.
Counter reply script
Wording for the phone and the message that moves a size query toward a fitted quote and a booked slot.
Result: Each counter hand asks the same three questions.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
A tyre enquiry is worth keeping when it carries a few facts the counter can act on.
- Tyre size from the sidewall
- Written as the buyer reads it, such as 185/65 R15. It lets the counter check stock before replying, so the price quoted is for a tyre you hold.
- Vehicle make, model and variant
- Taken when the size is unknown. The advisor reads the fitment from the model and confirms it with the buyer before quoting.
- Fit now or fit later
- A driver with a flat tyre needs a slot today, while a planned replacer is comparing shops. Mark which, so urgent callers are served first.
- Brand asked for, or none
- A buyer who names a brand wants that tyre or a close match. A buyer who names none is asking you to recommend, which is your chance to explain the choice.
- How the enquiry reached you
- Listing call, WhatsApp, garage referral, fleet visit or walk-in. One word on the sheet shows which source sends buyers who complete a fitting.
- Fitted, lost or still thinking
- Close each line with the result. A lost enquiry with a reason, such as price or stock, tells you what to change in the next quote.
Who it is for
This is written for these tyre dealers.
- Multi-brand passenger car tyre shops
- Two-wheeler tyre and puncture shops
- Truck and bus tyre dealers
- Authorised brand tyre showrooms
- Tyre retreading shops
- Tyre and alignment centres that offer balancing and wheel care
- Fleet tyre suppliers who serve transport companies
- Tractor and farm tyre dealers
Before you decide
When this may not be the right fit.
- Your counter does not note the tyre size or the vehicle on a call, so a new source of enquiries would arrive with nothing to act on
- Nobody checks stock before quoting, and more enquiries would only mean more prices given for tyres you do not hold
Before you decide
Agree the work. Know how to judge it.
Lead generation for tyre dealers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from tyre dealers. Anything missing is noted in the written scope, with who will supply it.
- The bill book for recent sales
- We need the recent bills, in the book or on the billing screen, with date, vehicle and tyre sold. They show who actually buys and what. If the book is incomplete, we begin with what exists and fill the picture as new bills are written with a source noted.
- A short list of garages you already know
- Write the names of garages, mechanics and used-car sellers who have sent you buyers, even if only once. The list is the quickest route to new work. Without it, a drive around the area comes first and delays the referral plan.
- Your stock list by size
- Tell us which sizes you hold and which you order on request. An enquiry form that invites a size you never stock wastes the buyer's time and yours. If the stock changes from one load to the next, we agree who corrects the list and how that person is told.
- A person to answer the enquiry sheet
- Name the person who reads new enquiries and replies with a fitted price. A lead that waits is a lead that goes to the next shop. If the counter is stretched, we cut the sources to those one person can handle.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Read the bill book for where buyers came from
We start with your bill book and the counter notebook, looking at the last stretch of sales and asking where each buyer first heard of you: a garage, a driver they know, the map, a passing glance at the board. You fill gaps from memory. The unknowns are marked, and tracking starts from today so the picture sharpens.
- 2
Build a form that asks for the size first
A buyer who gives a size and a vehicle is ready to be quoted, so the enquiry form, the saved reply and the counter question all begin there. We draft the form with you and test it by sending a size ourselves. You decide which extra questions are worth asking, such as the fitting preference or the budget.
- 3
Make the list of garages that send work
Garages see the worn tyre before the owner does. We list the garages, workshops and used-car sellers near you that already send buyers, and those that could. You rank them by what they have sent. A short visit plan follows, with a note on what each would want from a tyre shop in return.
- 4
Write a fleet prospect list from the field
Fleet buyers are found on the road and in depots, not through a search. With you, we list the transport firms, taxi operators and delivery owners within reach of the shop, using what you have seen and heard. You choose which to approach first, and we write a short note for each kind.
- 5
Compare sources against the sheet we began with
When the sheet has been in use through a few busy stretches, we set the enquiries by source beside the first picture, and mark which led to a fitted set. You tell us which sources felt worth the effort. The comparison is in enquiries and fittings, and the weaker sources are dropped.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Which lead source should a new tyre shop start with?
How do we know a lead was worth the effort?
Should we collect a buyer's number before giving the price?
Do we treat a tyre brand's own enquiry leads differently?
Do we call every enquiry a lead, even a price check?
Should we pay a garage for every buyer it sends?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for tyre dealers
Related work to consider.
Closest to this: leads and follow-up
Also for tyre dealers
Or start from the overview: sales and marketing for tyre dealers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.