Skip to content
GullySales

Invoice discounting and factoring providers · Lead generation

Find the suppliers who are waiting on a buyer's payment, and the buyers who can let them in.

Lead generation for a receivables finance provider is the work of producing enquiries from suppliers with approved invoices on buyers you can work with, and from the finance teams that open those buyers. GullySales builds the sources, the questions asked and the record that shows which route produced an onboarded supplier.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Editorial illustration for Demand and lead generation

Plan the next part of the work

Last updated 21 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For invoice discounting and factoring providers

Where it usually goes wrong, and what we would do.

  • “A supplier without a workable buyer is no lead”

    An owner may ask warmly and still hold invoices on buyers the provider cannot service. If the form does not ask for the buyer, the call is spent finding out that nothing can be done.

  • “The buyer's finance desk is a lead too”

    One anchor buyer opens a whole supplier base. Chasing suppliers one at a time while the buyer is never approached repeats the same explanation to every one of them.

  • “Accountants hear the problem first”

    The adviser who prepares a supplier's GST returns sees the unpaid bills. Without a referral note, that knowledge never becomes an enquiry for you.

  • “Enquiries come in different shapes”

    A supplier owner, an accountant and a buyer's executive all use the same phone line and the same form. Treating them alike wastes each call.

What we do

What we deliver for invoice discounting and factoring providers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A map of routes by caller type

    A list of how suppliers, accountants and buyer finance teams each reach you, written with your relationship managers.

    Result: You can see which route fills the pipeline.

  2. A form that asks for the buyer

    A short form asking for the buyer's name, the invoice stage and the sector, so a call opens with what can be done.

    Result: Callers open files they can actually service.

  3. A buyer onboarding approach

    A written route into one anchor buyer: the introduction, the note for its finance team and the follow-up.

    Result: A named buyer has a named contact in your team.

  4. An accountant referral line

    A sheet and a call plan for chartered accountants and GST practitioners in a cluster.

    Result: Advisers know what a suitable supplier looks like.

  5. One enquiry register

    A single record where every enquiry carries a caller type, a buyer and a source.

    Result: Onboarded suppliers can be traced to the route that brought them.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

Where enquiries come from

The doors a receivables finance provider's enquiries come through, and what to record at each.

Supplier owner searching after a shipment
Record the buyer named, the sector and the stage of the invoice. Reply with the document checklist and what the provider needs to know about the buyer.
Chartered accountant referral
Note the adviser and the supplier's buyer. Send the adviser an acknowledgement so they see the supplier reached you.
Anchor buyer finance team
Log the person, the supplier base mentioned and the platform or arrangement discussed. The next step is a written note for their review.
Association talk attendee
With consent, record the association, the sector and the buyers the member sells to. Follow up with the explainer, not a pitch.
Platform onboarding query
Write down which platform the supplier is registered on and what is blocking them. It decides whether you help with registration or with funding.
Returning supplier with a new buyer
Record the new buyer and check whether it is one you can service. A past supplier needs fewer questions and a faster reply.

Who it is for

This is written for these invoice discounting and factoring providers.

  • NBFC factors working with MSME suppliers across industrial clusters
  • Fintech platforms that connect suppliers to several financiers
  • Bank and financier desks that onboard suppliers of anchor buyers
  • Invoice discounting providers focused on one sector such as textiles or auto components
  • TReDS-linked providers helping suppliers register and upload invoices
  • Providers serving exporters with receivables on overseas buyers
  • Providers working with a single anchor buyer's supplier base
  • Smaller regional factors in cities such as Ludhiana, Surat and Coimbatore

Before you decide

When this may not be the right fit.

  • You have not yet agreed with compliance which buyers and sectors you will service, so enquiries would meet a no at the end.
  • Nobody in your team can speak to a buyer's finance desk, so the buyer-side route would produce nothing.
  • You have no written statement of what you need from a supplier, so callers would not know what to bring.

Before you decide

Agree the work. Know how to judge it.

Lead generation for invoice discounting and factoring providers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from invoice discounting and factoring providers. Anything missing is noted in the written scope, with who will supply it.

Files of suppliers already onboarded
We need the real files, with names masked if you prefer, to see how each supplier first arrived and which buyer sat behind them. They may be in any state, even a spreadsheet with gaps. Without them we work from interviews alone and the map of routes is thinner, so we mark it as unproven.
The list of buyers you can already serve
A supplier is only a lead if their buyer is one you can work with. Bring the current list of accepted anchor buyers and platforms, even if it is short. If it is missing, we cannot tell a workable enquiry from an unworkable one, and every supplier call is treated as unqualified until the list exists.
A named person for each caller type
Decide who takes a supplier call, who speaks to a buyer's finance team and who handles an accountant. It can be one person with three hats, but it must be a name. Without it the routes we draw have no end, and enquiries wait in a shared inbox that nobody feels responsible for.
Your compliance head's availability to review
Every question on the form and every line in the buyer note touches eligibility or approval, which your compliance head or adviser must clear. Have that person agreed and reachable before drafting starts. If they are not, we still draft, but nothing is published and the work pauses at the first claim.
Access to the current enquiry inbox
We need to see how enquiries arrive now, whether by the site form, a shared mailbox, WhatsApp or a relationship manager's phone. Read-only access is enough. If some arrive on personal phones, we ask those managers to forward a sample, and any route we cannot see stays out of the baseline.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the last onboarded suppliers' files

    We sit with the files of suppliers you onboarded and note how each first reached you, which anchor buyer sat behind the invoices and who made the introduction. You tell us which of those files were easy and which were painful. From this we write down the routes that have really produced an onboarded supplier, so the new work starts from your own record and not a guess.

  2. 2

    Sort routes by who is calling

    A supplier with an invoice, a buyer's finance executive and an accountant with a client in trouble ask different things, so each route is given its own door. We list the routes that exist today, such as a referral from an association or a call from a cluster, and mark which ones have no owner on your side. You decide who on your desk answers each caller type.

  3. 3

    Draft the questions asked of a new supplier

    We write the short set of questions a supplier answers when they enquire: who the buyer is, whether the buyer already works with a platform, and what kind of invoice is outstanding. Your credit head reads each question and removes anything the desk cannot act on. A question that only collects data nobody uses is cut, so the form stays short enough to finish on a phone.

  4. 4

    Prepare the note for buyer finance teams

    We draft a one-page introduction aimed at the finance team of an anchor buyer, explaining what onboarding your firm involves for them and what stays with the supplier. Your compliance head clears every line before it is sent. You choose the first few buyers to approach, because only you know which relationships you can open and which would be awkward.

  5. 5

    Run a test enquiry through the register

    We submit sample enquiries from a supplier, a buyer's executive and an accountant, then follow each one into the single enquiry register and on to the person who calls back. Gaps show up here: a field that does not save, a call that goes to nobody, a source left blank. You and the desk fix what the test exposes before real enquiries arrive.

  6. 6

    Read suppliers onboarded against the earlier record

    We compare the register with the figures taken from the old files before the work began: enquiries received, suppliers with a workable buyer and suppliers who reached their first uploaded invoice, each by route. You see which routes brought workable suppliers and which brought only calls. Together we decide which routes get more attention and which are dropped, without assuming any route will keep delivering.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we buy lists of MSME suppliers?
No. We do not buy or sell lists. Bought numbers carry consent problems and reach people who never asked. Build sources through buyers, accountants and associations, where a supplier arrives with a real invoice.
What counts as a qualified supplier?
A supplier with raised invoices on a buyer you can service and the papers to show it. Qualification is two facts recorded at the first contact: the buyer's name and the invoice stage.
How do we treat duplicates?
Match on the supplier's registered business name and phone, then merge with all sources noted. The reason is that a supplier reached through both an accountant and a search tells you which route is warming the market.
Do offline sources count?
Yes. An association talk or a buyer meeting can start a file. Record them in the same register as web enquiries, with the event and the person met, so that every route is read in one place.
Do we need a new system to start lead generation?
No. The enquiry register can begin as a shared sheet if your desk will keep it current, and you move it into a CRM later if the volume justifies it. What matters first is that each enquiry carries its source and its buyer. We design the fields so they transfer to a CRM without being retyped, and we tell you plainly if the sheet is becoming a burden.
Who contacts the buyers' finance teams?
You do, with our note in hand. A finance team at a large buyer responds to a provider they can place, through a senior person or an existing relationship, so a cold mail from an agency carries little weight. We prepare the note, the shortlist of buyers and the sequence of approach. You or your senior colleague makes the introduction, and we record what comes back.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.