Skip to content
GullySales

NBFCs · Follow up systems

Call tomorrow, as promised, so the file is still open when the documents arrive.

A follow-up system for an NBFC is the set of reminders, scripts and rules that make sure every pending file gets the next call or message. GullySales works on the follow-up steps for each stage, from first enquiry to the document chase and the post-disbursal check.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A loan officer explains paperwork to a customer at a lending office

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For NBFCs

Where it usually goes wrong, and what we would do.

  • “The borrower promised to send papers”

    The promise is made on the call and forgotten by both sides. Without a dated reminder, a file waits until the borrower, or a rival lender, makes the next move.

  • “Different stages need different messages”

    A reminder about a bank statement is nothing like a note after sanction or a check after disbursal. One generic nudge reads as spam to the borrower and as noise to the team.

  • “Partners need an update as much as borrowers”

    A DSA who hears nothing about a file assumes it is dead and sends the next one elsewhere. A short status message at each stage keeps the partner informed and keeps you in the running.

  • “Silence after disbursal is a lost second loan”

    A borrower who repaid well is the easiest next customer. Without a rule for contacting them at the right point, top-up and repeat loans go to whoever called first.

What we do

What we deliver for NBFCs.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A follow-up map by stage

    For each stage, who contacts the borrower or partner, by which channel and with which wording.

    Result: Every stage has a defined next touch.

  2. Document chase messages

    Polite, specific requests that name the missing paper and how to send it.

    Result: The borrower knows exactly what is pending.

  3. Reminders in the CRM

    Dated tasks for each open file and a view of overdue ones for the team lead.

    Result: Overdue files are visible before they die.

  4. Partner status updates

    A short message to the DSA or dealer when a file is received, queried, sanctioned or declined, with the reason in plain words.

    Result: Partners stop chasing you for news.

  5. A repeat-borrower rule

    A review of good-standing borrowers and the point at which sales may contact them, agreed with collections and compliance.

    Result: Existing customers hear from you for the right reasons.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments in a loan file where a message or call keeps it alive.

Document promised by date
Record the date the borrower named for the bank statement or ID. The next call refers to that promise in the borrower's own words.
Missing page in a statement
Send a plain message naming the exact page or month that is missing. A vague request for fuller documents is the one a borrower ignores.
Sanction letter sent
Tell the borrower what happens next and who they speak to. A sanctioned borrower who hears nothing begins to enquire elsewhere.
Partner status update
Send the DSA or dealer a one-line status when the file moves. It saves their call to your desk and keeps them sending files.
Disbursal done
Thank the borrower and give the customer care route. It opens the door for later questions and sets the tone for repayment.
Repeat borrower after closure
Note the closing date of the loan and the repayment record. A borrower with a clean record is a fair candidate for a call about a new product.

Who it is for

This is written for these NBFCs.

  • Vehicle and two-wheeler finance NBFCs working through dealers
  • MSME and business loan NBFCs working through DSAs
  • Home loan and loan against property housing finance companies
  • Consumer durable and personal loan NBFCs
  • Gold loan NBFCs with a branch-led model
  • Microfinance NBFCs working with groups of women borrowers
  • Digital lending NBFCs partnering with apps and platforms
  • Infrastructure and equipment finance NBFCs selling to businesses
  • Regional NBFCs opening branches in a new district

Before you decide

When this may not be the right fit.

  • You have no document checklist yet, so a chase message would not know what to ask for.
  • No one reads the replies, so a system that sends reminders would collect answers nobody sees.
  • Your borrowers have not agreed to be contacted on the channel you would use, and you cannot yet record their consent.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for NBFCs: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from NBFCs. Anything missing is noted in the written scope, with who will supply it.

A list of files that stalled recently
Give us a set of files that went quiet, with the stage they stopped at. They show where follow-up is weak. If the record cannot show it, we start with the CRM history and the callers' memory, which is slower and less exact.
Each product's document checklist
The papers asked for must be written down per product, including the alternatives you accept. Our chase messages depend on them. Without a checklist, messages stay general and borrowers send the wrong things again.
Callers who can describe how they follow up
Two or three callers must tell us what they really do after a missed call. Their habits are the system to be improved. If nobody is available, the reminders we build rest on guesses about what is practical.
A rule on borrowers who ask to stop
Your compliance head must say how a request to stop contact is recorded and honoured. We build the rule into every reminder. Missing, we hold the automated messages back, because contacting someone who asked to stop is a risk.
Language needs of your borrowers
Tell us which languages callers and borrowers use. Messages are written in each. If you only provide English, borrowers who prefer another language will get replies they find harder to answer.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Pull files that stalled and read why

    We take a sample of files that stopped at documents, at credit and after sanction, and ask the owner of each what happened. You confirm the true reason where the record is thin. The picture that results shows the points where a missed call actually costs you a disbursal, which is where the system starts.

  2. 2

    Set a rule for what counts as closed

    With sales and operations heads we write when a file is closed, when it is parked and when it is dropped. A borrower who says no, one who goes silent and one awaiting an employer letter are different. You settle each rule, so a closed file is never a forgotten one.

  3. 3

    Write the document chase for each product

    For each loan we list the papers a borrower forgets and write the message that asks for them, in plain words and in the borrower's language. You and compliance approve each message. A borrower who sends a photograph of the wrong page gets a reply that names the page needed.

  4. 4

    Decide what partners are told and when

    A dealer or DSA wants to know where their file stands. We draft the status updates they receive at each stage and you choose which stages trigger one. The partner stops phoning your callers for news, and your team keeps its time for borrowers.

  5. 5

    Set reminders in the CRM and test them

    Each stage gets a next-action reminder for the file owner. Your callers run test files through the whole path while we watch for reminders that fire too early or not at all. You decide the wording of each task. The system goes live only when the team has used it on test files.

  6. 6

    Read what changed in stalled files

    We return to the stalled files noted at the start and compare them with files handled under the new rules: how many reached sanction, how many were closed with a reason, how many repeat borrowers came back. You decide which rules to loosen or tighten. We report the record and promise no figure.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many follow-ups are too many?
That is for your compliance head and the borrower's consent to decide. Contact rules differ and change, so we set limits with them and stop the sequence when the borrower asks us to.
Should follow-up be automatic?
Reminders can be. The message to a borrower about a document or a sanction should sound like a person who knows the file, so automation prompts the human and does not replace them.
Who owns follow-up, sales or operations?
Agree it by stage. Sales owns the file up to login, operations owns it through processing, and sales and collections share the repeat borrower. A single owner per stage prevents dropped files.
What about a borrower who has asked us to stop calling?
Record it at once and stop that channel. A borrower's request is an instruction, and ignoring it risks a complaint to the regulator and a lost reputation with the partner who sent them. Use only the channel they agreed to, if any.
Who decides when a stalled file is dropped?
Sales and operations agree the rule, and the file owner applies it. A file is dropped only after the borrower has said no, or after the set number of attempts across different channels has failed, and the reason is recorded in the system. Nothing is dropped silently. We write the rule with your sales and operations heads in the stage definitions, so a closed file always shows a reason. Compliance decides how a request to stop contact is recorded, and the rule respects it.
Should follow-up messages be automatic?
Some can be, such as a document list sent when a file is created, but the call that follows a silent file should be a person's. Automatic messages need the borrower's consent and approved wording. We mark each step as automatic, reminder or human, and you decide. We begin with reminders to staff, test them, and add automatic messages only where the test shows they help the caller and not annoy the borrower.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.