Skip to content
GullySales

Electricians · CRM

Keep every customer, fault and quote in one place you can find.

A CRM for an electrician is a simple record of each customer, the job done, the quote sent and the next step due. GullySales works on a set-up that fits a small team and one phone.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A handyman explains a cabinet repair to a homeowner

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For electricians

Where it usually goes wrong, and what we would do.

  • “Phone numbers in the memory are lost numbers”

    A customer from two years ago calls about a fan and you cannot recall the house or the earlier work. A record of the address, the job and the date saves a second visit to find out.

  • “Quotes sent on WhatsApp disappear in the chat”

    A quote scrolls out of sight under newer messages. One list of open quotes, with the amount and the date, shows which customer needs a nudge.

  • “Repeat work depends on remembering”

    Shops and landlords call again when something breaks, and an annual check suits them. A record of the last check and the DB condition tells you when to offer another.

  • “A helper cannot use what only the owner remembers”

    When a helper takes a call, the history should be available to them. A shared record lets them answer sensibly about the customer's earlier job.

What we do

What we deliver for electricians.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A customer sheet

    Name, locality, number, type of premises, jobs done and the date of each.

    Result: One sheet or app holding every customer.

  2. A quote tracker

    Each quote with the amount, the date sent and the status: open, won or lost.

    Result: A list showing which quotes await an answer.

  3. A repeat-work reminder

    Notes for shop and office accounts showing when a check is due.

    Result: A reminder against each account that needs one.

  4. A rule for logging calls

    A habit of adding every call, message and visit within the day.

    Result: A short rule you and any helper can follow.

  5. A set-up matched to your size

    A choice of tool that fits one phone and a small team, without extra cost or complexity.

    Result: A working record you can open from your phone.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields an electrician's customer sheet needs, and who fills each.

Name, number and locality
Filled by you at the first call. Lets you call back and group jobs by area on one day.
Building type and floor
Filled at the visit. Tells you the likely wiring age and whether lift or stairs matter for the next visit.
Job done and parts used
Filled by you or a helper after the visit. Lets you answer a warranty question without searching the chat.
Quote sent and its date
Filled when the quote leaves. Shows which quotes are still open for a follow-up message.
Next service date
Filled for annual customers and societies. Lets you remind a shop or society before the work falls due.
Source of the call
Chosen from a short list: Google, neighbour, designer, society. Shows which source brings planned work.

Who it is for

This is written for these electricians.

  • Home electricians doing repairs and fittings
  • Rewiring and new-point specialists for flats and independent houses
  • Electricians serving shops, clinics and small offices
  • Inverter, UPS and home battery installers
  • Fan, light and fitting installation teams
  • Earthing, MCB and DB box upgrade specialists
  • Electricians on annual maintenance for societies and landlords
  • Electricians who also take solar and EV charger point work

Before you decide

When this may not be the right fit.

  • Everything is in your head and you handle a few customers, so a sheet would be typing for no gain.
  • Your helper will not enter anything after a job, so the sheet would hold only what you write.
  • You work through a contractor who owns the customer, so there is no customer to record.

Before you decide

Agree the work. Know how to judge it.

CRM for electricians: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electricians. Anything missing is noted in the written scope, with who will supply it.

Every phone that holds customer numbers
Yours and your helper's, with permission to copy the names and numbers into one list. The customer sheet starts from them. If a number stays on one phone, it stays lost to the rest of the team. Contacts saved only by first name or by a shop's name are acceptable, and we sort them together.
A folder of quotes sent on WhatsApp
The quotes you sent in chats, exported or photographed, with the date. They fill the quote tracker. Without them, the tracker starts empty and open quotes go unfollowed.
A list of customers with repeat jobs
Landlords, shops and offices that call again, with the type of work. The reminder depends on them. If you have none, the reminders cover only new jobs from now.
A named person who updates the sheet
The one person who writes into the record, even if the owner speaks the details aloud. A sheet without an owner decays. If none is named, we reduce the columns to what you can keep. The role can be shared between you and the helper if the days are agreed, but each entry needs one name against it.
Your view on what is private
Whether a helper may see every customer's address and the amount paid. Access is set from this. Without it, we limit the helper's view to names and next steps. Some owners prefer that the helper sees only the phone number and the fault, and that is a valid choice.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Write down how an enquiry travels today

    We follow one fault call and one planned job from the first ring to the final bill, noting where the number is saved, where the quote goes and who remembers the next step. You tell us where it breaks; the break sits where a helper takes over, and we note that too.

  2. 2

    Choose the simplest tool that holds it

    Based on your phone, your helper and your habits, we pick either a shared sheet or a light app. You decide, since you will use it on site. We set up the columns to match your jobs, not a sales template. We also check that your helper's phone can open it on a site with a weak signal, since a tool that fails there will not be used.

  3. 3

    Load customers from phone and chats

    We move the numbers and job history you give us into the customer sheet, with the last job and the date. You confirm duplicates and remove people you will never call again. What exists now is one list instead of four. Customers who belong to a society or shop cluster are tagged by locality, so a later fault call from the same building is recognised.

  4. 4

    Set up the quote tracker and reminders

    We add the quote tracker, with the amount sent, the date and the next step, and the repeat-work reminder for things like an inverter check. You test it with three open quotes. A quote with no reply is flagged in a plain colour, so a glance at the sheet shows who still needs a message from you or your helper.

  5. 5

    Agree the rule for logging calls

    You and your helper agree what gets written, when and by whom, so no one has to remember. We write it as a one-line rule that stays beside the phone. The rule also says what to do when a call comes while you are on a ladder: the helper notes the number and the fault, and you complete the record afterwards.

  6. 6

    Read the sheet against last season

    After the sheet has been used on live jobs, we compare the quotes, repeat calls and missed follow-ups with the figures recorded before. You decide what columns to add or remove.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do I need paid software?
Not at the start. A well-built sheet works for a small team, and a paid tool is worth considering once the number of customers makes the sheet slow.
Is customer data safe?
Keep the record to what you need, use a password and share access only with your team. Check any tool's current terms before relying on it.
Will this take time away from jobs?
The habit takes a minute after a job. The time you save comes from not hunting through chats for a quote or an address.
Where should I keep customer details safely?
Keep them in one sheet or app with a screen lock, not scattered in chats. Share a customer's number only with a helper who needs it for a visit. If a helper leaves, remove access that day. Check data rules with your own adviser if you hold customers' addresses in bulk.
What happens to my customer list if the helper leaves?
The list stays with you because the sheet or the app sits on an account you own, not the helper's. We set it up so that you are the owner and the helper is added as a user. When the helper leaves, you remove their access and the data stays. We also ask that the helper's own phone not be the only place any number is saved. A short leaving checklist, with the sheet and the quote tracker on it, is written during the set-up so the change takes a few minutes.
Can the CRM send reminders to customers by itself?
It can prompt you to send them, and a light tool can also send a message you have approved, but we start with prompts to you. A reminder to a customer, such as an inverter battery check, should go only to people who agreed to hear from you, and the wording should be yours. Check the platform's current rules before any automatic sending. We set up the reminder list first and add automatic sending only when you are comfortable and the permissions are recorded.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.