Electricians · Lead generation
Bring in the fault calls and planned wiring jobs that suit the work you want.
Lead generation for an electrician means setting up the few places where a household, shop or designer looks for wiring help, so the right enquiries reach your phone. GullySales works on the sources, the reply and the record of which source paid.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Plan the next part of the work
Last updated 21 Nov 2026.
For electricians
Where it usually goes wrong, and what we would do.
“A fault call and a rewiring enquiry are different leads”
The fault call wants someone at the door today and pays for a visit. The rewiring or new-AC-point enquiry wants a site look, a written list and a comparison with other quotes. Treating both the same loses the second.
“The electrician who answers first is the one who gets the job”
Someone adding points sends one message to four numbers and books whoever replies with a sensible question. A missed call from a number you do not save is a lead that went to a rival without you learning of it.
“Referral sources are leads and need a record”
An interior designer, a lighting-shop counter and a property manager each send work again if the first job went well. Without a note of who sent what, you cannot tell which relationship deserves a visit and a thank-you.
“Wrong-area calls waste a day”
A call from a locality two hours away in traffic costs the visit and the petrol. Naming the localities you cover in every listing and message sends those enquiries elsewhere before they reach you.
What we do
What we deliver for electricians.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A source list for your own trade
Google Maps, society WhatsApp groups, designers, builders, lighting shops and property managers, ranked by the paid jobs they brought you in the past.
Result: A written list of sources with the last ten jobs matched to each.
A fault-call route and a planned-job route
Two short paths: one that gets a visit booked, and one that asks for the room, the points and the photographs before a site look.
Result: Two saved reply routes you can paste into WhatsApp.
Area and job filters in every listing
Wording that names the localities and the jobs you take and the ones you do not.
Result: Listings and messages that state your area and work types.
A referral register
A simple sheet recording who sent each job, what it was and whether you thanked them.
Result: A sheet showing the sender against each paid job.
A missed-call follow-up
A message that goes to every missed number asking what the fault is.
Result: A list of missed numbers with a reply sent against each.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
The details to record from each call so a fault and a planned job are handled differently.
- Type of call: fault or planned
- Ask in the first sentence. A fault call needs a visit today; a planned job needs a visit and a written quote. The two go to different lists.
- Locality and building type
- Flat, independent house, shop or clinic, and the locality. Tells you before travel whether the call is in your area and what tools to bring.
- What stopped working
- Note the fault in the caller's words: tripping, no power in one room, a burning smell. A burning smell gets an instruction to switch off at the main before any visit.
- Photograph of the board or point
- Ask for the DB box open and the point in question. A photograph shows the age of the wiring and saves a wasted visit.
- How the caller found you
- Google, a neighbour, a designer or a society notice. Over time the record shows where to spend effort.
- Missed call and time of return
- Write the time the call came and the time you called back. A fault caller who was not called back has already rung the next number.
Who it is for
This is written for these electricians.
- Home electricians doing repairs and fittings
- Rewiring and new-point specialists for flats and independent houses
- Electricians serving shops, clinics and small offices
- Inverter, UPS and home battery installers
- Fan, light and fitting installation teams
- Earthing, MCB and DB box upgrade specialists
- Electricians on annual maintenance for societies and landlords
- Electricians who also take solar and EV charger point work
Before you decide
When this may not be the right fit.
- Your day is already full of fault calls you cannot reach, so a new route would add calls you would have to miss.
- You have no helper or phone cover when you are on a ladder, so every extra enquiry would go to a voicemail.
- You work only in one lane of a locality, and lead work would bring callers from areas you will not travel to.
Before you decide
Agree the work. Know how to judge it.
Lead generation for electricians: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from electricians. Anything missing is noted in the written scope, with who will supply it.
- Your call log from the last busy season
- The phone's call history or the page in the job book, kept as it is, with gaps and scribbles. We use it to count what came in before the work began. If it is missing, we start a fresh log and the comparison at the end has nothing earlier to be set against.
- A list of customers who sent others
- The names of landlords, shopkeepers, builders and neighbours who have passed your number on. They become the first entries in the referral register. Without them, the register starts empty and we cannot tell a referral from a stranger's call.
- The areas you will not travel to
- A plain statement from you, society by society or road by road, of where you refuse a visit. It writes the wrong-area reply and the listing filters. If you leave this undecided, every caller outside your reach still gets a visit promise from the first reply.
- A phone that someone answers or returns
- Name the person who picks up during site hours and the person who returns missed calls. The missed-call follow-up depends on a named human. If nobody is named, the best source still loses the caller to the next electrician on the map.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Sort last season's calls into two piles
We start with your call log, the WhatsApp chats and the job book, and ask you to mark each entry as a fault call, a planned wiring job or a wrong-area call. You make the marks because only you remember which caller turned into a visit. When this is done, you can see which kind of enquiry you actually want more of.
- 2
Decide how many jobs a week you can carry
Before any source is switched on, you tell us how many fault visits and how many planned jobs your team and your helpers can take without leaving a customer waiting. We write that down as a capacity note, because a source that brings more calls than your van can reach only produces disappointed callers.
- 3
Agree the localities and the job types
We sit with you over a map of the societies, streets and shop clusters you can reach, and draw the line you are willing to travel for a fault and a longer line for a planned job. You choose which jobs you refuse, such as heavy industrial wiring. These choices become the filters written into every listing.
- 4
Place the sources and test each one
We set up the listing, the profile wording and the referral request, then make a test call from an unknown phone to each source. We listen to how the call is answered, check that the area and job filters appear, and read the first WhatsApp reply as a stranger would.
- 5
Read the register against the call log
When enquiries start arriving, every one is entered in the referral register with its source. We then place it beside the call log you gave us at the start and count fault calls, planned jobs and wrong-area calls again. You decide which source stays, which is dropped, and which needs a better reply.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Should I pay for ads to get fault calls?
How do I know which source brought a job?
Can lead generation fill a day when I am already busy?
What do I say to a caller outside my area?
Do I have to give up my regular customers to take new leads?
What happens if my helper takes the calls instead of me?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for electricians
Related work to consider.
Closest to this: leads and follow-up
Also for electricians
Or start from the overview: sales and marketing for electricians.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.