Skip to content
GullySales

FMCG distributors · Secondary sales tracking

Know what each shop took from your godown, not just what you took from the company.

Secondary sales tracking for an FMCG distributor is the record of what you sold on to retailers, wholesalers and institutions, set beside what you bought from the company. GullySales sets up the outlet-wise return from your Tally data and bill books, in the form the company asks for and the form you need.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A distributor clerk and representative reconcile retailer returns with dispatch records

What secondary sales tracking means

Secondary sales tracking is the record of what your distributors sell on to retailers and dealers, set beside what you sold to them. GullySales designs the return your distributors fill in, collects it from their Tally files or paper books, and turns it into a view your sales head can act on.

Last updated 14 Nov 2026.

For FMCG distributors

Where it usually goes wrong, and what we would do.

  • “The company sees your purchases, and your sales are in your own book”

    Primary billing is simple to read from the brand's side. Secondary sales sit in your invoices, spread across salespeople, vans and counter sales. Unless someone pulls them together by outlet, the distributor cannot say how much stock moved on to the shelf and how much sits in the godown.

  • “Claim time is when missing secondary data hurts”

    Scheme claims depend on showing what was sold on and to whom. When the outlet name on a bill differs from the outlet in the register, or a van sale has no party entered, the claim is held until someone rebuilds the list by hand.

  • “Godown stock and shelf sales drift apart without notice”

    A distributor can buy steadily to hold the territory while sales slow in a few lanes. The purchase figure looks healthy and the stock figure rises. Only outlet-wise secondary figures show where the slowdown began and which line is stuck.

  • “Salespeople report visits, and the book shows bills”

    A salesperson can visit a full beat and book orders from only a part of it. The beat register records the visit. Setting visits next to bills shows which shops were asked and did not order, and which were never reached.

What we do

What we deliver for FMCG distributors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Secondary sales sheet by outlet and brand

    A format that lists each retailer, the lines bought and the quantity, fed from Tally exports and corrected for repeated spellings of the same shop.

    Result: Sales to every outlet can be read in one sheet.

  2. Outlet master list

    One clean list of retailers with area, beat, salesperson and phone, so every bill matches a single outlet record.

    Result: Each shop appears once, under one name, with its beat.

  3. Primary against secondary view

    A comparison of what was bought from each company and what was sold on, with godown stock beside it.

    Result: The owner can see which lines are building stock.

  4. Claim-ready extract

    An extract laid out as each company asks, built from the same outlet records, so claim data is not rebuilt from scratch each time.

    Result: A claim file drawn from the register, not from memory.

  5. Billing clerk note

    A short instruction on how to enter outlet names, van sales and returns so the register stays clean from the next bill onward.

    Result: Fewer unmatched bills reach the claim stage.

How the result is measured

  • Distributors submitting a return, and how many are late
  • Retailers and dealers billed, by area
  • Secondary sales against primary sales, per distributor

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these FMCG distributors.

  • Distributors for packaged food, biscuits and snacks brands
  • Home and personal care distributors for soaps, detergents and toiletries
  • Beverage and bottled water distributors with chilled-outlet coverage
  • Staples and edible oil distributors serving wholesalers and kiranas
  • Dairy and ice cream distributors with cold-chain vehicles
  • Multi-brand FMCG distributors holding four or five company codes
  • Super stockists who supply sub-distributors in several towns
  • Modern trade and institution suppliers to supermarkets, canteens and hotels

Before you decide

Agree the work. Know how to judge it.

Secondary sales tracking for FMCG distributors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Map existing partners, their territories, and the customers they serve. Review active selling and repeat orders separately from the number of partners signed up.

Make the scope clear

Agree partner fit, territory rules, onboarding, and support responsibilities. Clarify how direct enquiries and partner enquiries are assigned before starting recruitment.

Check the work in use

Follow a partner enquiry through to an order and the next purchase. Check whether the partner has the product knowledge and material needed to sell without repeated intervention.

Know when to change course

If current partners cannot sell because supply or support is weak, resolve that before recruiting more. A bigger network can spread the same problem further.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from FMCG distributors. Anything missing is noted in the written scope, with who will supply it.

Company purchase statements
Primary figures come from the invoices the company raises on you. Bring them for the period. Without them, secondary is shown alone and cannot be matched to supply. The statement also shows scheme credits, which lets us separate stock bought from money returned.
A month of billing in Tally
A recent sales register with outlet names and dates is the raw material. If billing is split across systems, tell us. Missing months are listed as gaps.
A naming rule for outlets
Decide on a single way to write a shop name. The clerk follows it from then on. Without a rule, the master list grows duplicates and the sheets lose accuracy. The rule is a short page that the clerk can keep at the desk: capitals, no abbreviations, owner name in brackets if two shops share a name.
The company's claim format
Ask your area sales officer for the template used at claim time. We shape the extract to fit. If none exists, we design a plain one and you confirm it with the company. Companies sometimes change the format when a new scheme begins, so bring the latest version and tell us who at the company sends it.
A list of paper-order salespeople
Some salespeople take orders on paper that reach the clerk late. Name them. The plan then adds a step to catch those orders on the day. The step is a line in the checklist and takes the clerk a few minutes.

How it works

How the secondary sales tracking work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Say what the secondary data is for

    We start by asking what you will do with outlet-level sales: answer the company at claim time, find slow shops, check godown drift or negotiate a bigger territory. You rank these. The purpose decides the columns we ask the billing clerk to keep. If the main purpose is the claim, the sheet follows the format the company asks for; if it is stock drift, the sheet is built around godown counts and bills. Choosing one purpose first keeps the return small enough for the clerk to keep up with. You sign the purpose line at the top of the sheet.

  2. 2

    Study how the billing clerk records sales

    We sit with the clerk in front of Tally and watch how a bill is raised, how returns are posted and how outlet names are typed. Differences between clerks are noted. You decide on a single naming rule so one shop does not appear in three spellings. We also note whether credit notes, damaged returns and free goods are posted against the original bill or as new entries, because that decides whether the return nets out. Differences between clerks are written on one page and settled with the owner before anything is rebuilt.

  3. 3

    Build the outlet master list

    From the sales register we extract every outlet and match duplicates. A salesperson checks the list on the beat and confirms route and owner. The outlet master list becomes the key that all later returns use. A shop that moved, changed hands or trades under two names is handled with the salesperson who covers it. The master list also carries the route and the wholesaler tag, so later sheets can be cut by route or by buyer type without any re-keying.

  4. 4

    Test the return on a month of bills

    We build the secondary sales sheet by outlet and brand from past bills and compare it with company purchase figures. Gaps show unbilled sales, returns or stock drift. You see the first comparison and tell us which differences are explained. If primary and secondary disagree by a wide margin, we do not guess, and instead list the causes we can find: unbilled stock, returns, stock held at the godown or sub-distributor sales not captured. The test month is closed only when you accept the explanation for each gap.

  5. 5

    Prepare the claim-ready extract

    Companies ask for outlet data when scheme money or a bigger claim is due. We design an extract in the format the area sales officer expects, and your clerk practises producing it. You approve what leaves your office. The extract is checked by the accounts person against the books before it goes out, and a copy is kept in a dated folder. If the company questions a line later, the folder answers it.

  6. 6

    Reconcile and hand over the routine

    After a few cycles we compare primary against secondary and read the differences with you. The billing clerk note records each step, and you choose who owns the routine. The first reconciliation is done together, the next ones by your staff. The first reconciliation is done at your office with the clerk, the accounts person and a salesperson in the room, and each difference is traced to a bill, a return or a delivery. The routine is written as a one-page checklist, and the clerk signs it as read.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need distributor management software for this?
No. Firms can start with Tally exports and a well-built sheet. Whether to adopt company-provided or third-party software is a separate decision, and your brand may already require one. We work with what you have.
Can you pull data straight from the company's portal?
Only if the company gives you access and its rules permit it. You hold the login, and we work from exports you download. We do not share or enter portal credentials on your behalf.
What if salespeople take orders on paper?
The paper order becomes a bill, and the bill is what we track. We add a simple step so the outlet name is written the same way each time, and van sales are noted against a party.
Do we need distributor management software?
Not to start. A well-kept Tally register and a spreadsheet can produce the outlet-wise return. Software helps later if you hold several company codes or sub-distributors, and we describe what to ask a vendor. The decision to buy waits until the manual return runs well.
What if salespeople write orders on paper?
The order still reaches the clerk, and the bill carries the outlet name. The risk is a late or missed bill. We add a step where the clerk lists paper orders received and marks them billed. The supervisor checks the list at the end of each route. When you receive a portal export from the company, the clerk can paste it beside your sheet, and we show how to match the two.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.