Skip to content
GullySales
Tell us what you need

Plasma cutting companies · Lead generation

Fill the table with plate jobs from buyers who need thick cuts, not price checks.

Lead generation for a plasma cutting shop means reaching the fabricators, equipment makers and contractors whose work is thick plate, and getting a drawing and a weight from them. GullySales builds the capability page, the enquiry route and the outreach list that bring those buyers to your phone.

Tell us what you needor call +91 80958 58589

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Also for plasma cutting companies

Sales and marketing for plasma cutting companies, the overview.

Last updated 18 Oct 2026.

For plasma cutting companies

Where it usually goes wrong, and what we would do.

  • “A rate-per-kilogram call is not yet a lead”

    The buyer who rings only to ask the rate may be comparing three shops from a list. A lead is a buyer with a drawing, a plate thickness and a date. The shop that asks for those three things on the first call turns a price check into a job.

  • “Structural contractors buy in bursts”

    A pre-engineered building contractor needs base plates and gussets in volume when a project starts, then goes quiet. Finding the next project before it begins is lead generation. Waiting for the phone to ring only catches the contractors who are already late.

  • “Equipment makers need the same part again”

    An attachment maker or implement maker orders the same brackets and plates repeatedly. One such buyer is worth more than a dozen one-off callers, yet they rarely search online. They are found by visiting the stockyard belt and asking who cuts for whom.

  • “Thick plate is the filter”

    A laser shop cannot take heavy plate, so those buyers have fewer options near them. Saying plainly which thicknesses and bevels your table handles sends the right buyers to you and spares the calls that never fit.

What we do

What we deliver for plasma cutting companies.

Every deliverable, what it covers for you, and the result it is there to produce. Nothing here is an extra.

  1. A buyer list by trade

    Structural, boiler and tank, earthmoving, agricultural and general workshop buyers near your yard, each with a contact and the plate they use.

    Result: A sheet with one row per buyer and a column for the plate size they last used.

  2. A first-call question card

    Three questions for every enquiry: drawing, thickness, date needed. Printed beside the phone and pinned in the shared chat.

    Result: Every call ends with the three answers written down or a note on what is missing.

  3. A capability page built for the search

    A page that names the table size, thickness limit by metal and bevel work, so the right buyer sees a fit before ringing.

    Result: A page that answers the opening questions of a call.

  4. Outreach to project-based contractors

    A short message to contractors about to begin a phase, offering table time for their plate.

    Result: A log of who was contacted, when, and what they replied.

  5. An enquiry register

    One place for every enquiry, its source, its file and its outcome.

    Result: A register where each lead shows where it came from.

How the result is measured

  • Enquiries generated
  • Cost per enquiry
  • Enquiries by source

Recorded as a baseline before work starts, so every later report has an honest comparison.

Read the full demand and lead generation page

Who it is for

This is written for these plasma cutting companies.

  • CNC plasma job-work shops for local fabricators
  • Plate cutting units near steel stockyards
  • Structural and pre-engineered building contractors' cutting partners
  • Boiler, pressure vessel and tank fabricators' cutting suppliers
  • Earthmoving attachment and agricultural implement cutting shops
  • Flange, ring and base plate cutting units
  • Plasma shops that also bevel and profile heavy plate
  • Workshops supplying machine frames and fixtures in plate

How it works

From your first message to the first report.

No open-ended retainer. Every step gives you something in writing.

  1. First

    Your brief

    You tell us what you need in a few short steps: your business, what you want, where enquiries come from and how they are handled.

  2. After the brief

    A conversation and a written scope

    We read it, then talk with whoever handles your enquiries. If you want our help, the scope, the fee and the reporting come in writing, and nothing starts before you have read them.

  3. Before work starts

    Baseline recorded

    The numbers this work is meant to move, such as enquiries, quotations, orders, visits or renewals, written down so every later report has an honest comparison.

  4. After the baseline

    The first fix goes live

    The fix we agreed to start with is put in place and measured against the baseline, whether that is a reply, a follow-up, a page, a listing or the handover between marketing and sales.

  5. As agreed

    Report against the baseline

    What moved, what did not, and what changes next, in plain words. How often you get it is set in writing before work starts.

  6. At renewal

    Renew on the numbers

    The term ends and you decide whether to continue from the results. The length is agreed in writing before anything starts.

How the lead generation work runs

  1. 1

    Understand your capacity

    We agree how many enquiries your sales team can actually handle well, so the system is not built to overwhelm it.

  2. 2

    Audit current sources

    We check what already brings in enquiries today, even informally, before adding anything new.

  3. 3

    Strategise the channel mix

    Content, search and paid channels are chosen based on where your buyers already look.

  4. 4

    Implement capture and follow-up

    Pages, forms and a follow-up process are built and connected end to end.

  5. 5

    Measure and optimise

    We track enquiry volume and quality and adjust the channel mix to match.

Why us

Why owners pick GullySales over an agency.

  • Marketing and sales, as one job

    Most agencies stop at the enquiry. We also fix what happens after it: the reply, the follow-up, the quote and the CRM.

  • The person on the first call does the work

    No account managers in between. You are never handed to someone you have not met.

  • A baseline before anything starts

    Your numbers are written down on day one, so every later report compares against something honest.

  • The fee in writing, split three ways

    Our time, your media spend and production on separate lines. You always see what goes to us.

  • No guarantees we cannot keep

    The term is agreed in writing and never a default twelve months. We never promise a ranking or a lead count, because nobody controls those.

  • One office, and we say so

    Nagarbhavi, Bengaluru. We work across India by call and WhatsApp and travel when a session needs to be in person.

#257, 3rd floor, Sri Nanjundeshwara Complex, Nagarbhavi 8th Block, Outer Ring Road. How we work.

Your brief

Tell us what you need, and we will read it before we call.

Eight short steps about your business, what you want and who decides. Most questions are a tap, and you can skip any you would rather answer on the call.

Tell us what you needor call +91 80958 58589

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Tell us what you need
Which buyers are worth chasing first?
Start with those who already buy heavy plate: structural contractors, tank and vessel shops and attachment makers. They have thick work every time and little choice nearby. General workshops can follow once the first group is on your register.
Do we need paid ads for lead generation?
Not as a starting point. Maps, a capability page and direct outreach reach buyers who already need thick plate. Paid search can be tested later against a single service, but check it brings drawings, not only calls.
How do we know which source sends the best leads?
Write the source on every enquiry in the register, then look at which sources produced booked jobs, not only calls. The sources that bring drawings and repeat orders are the ones to feed.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

More for plasma cutting companies

Everything else we would do for you.

Closest to this: leads and follow-up

Also for plasma cutting companies

Or start from the overview: sales and marketing for plasma cutting companies.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.

Tell us what you need