Skip to content
GullySales

Adhesive manufacturers · Follow up systems

Notice the dealer who stopped reordering and the quote nobody called back.

A follow-up system for an adhesive manufacturer is the set of calls, visits and messages that come after a demonstration, a sample or a quote. GullySales writes down who follows up, on which trigger and what is said, so the next step is never left to memory.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of chemical manufacturers at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For adhesive manufacturers

Where it usually goes wrong, and what we would do.

  • “The first order is the weak point”

    A dealer takes a trial lot, the bags sit and nobody asks. A call to learn whether they moved, which tilers asked and what was damaged is what turns a trial into a reorder.

  • “A demonstration with no next visit fades”

    A mason who attended a demonstration meets other bag brands within days. A message with the method card, and a visit when the tiler is next on a site, keeps the demonstration remembered.

  • “Quotes die in silence”

    A builder quote with no date for a call is left to the builder. Put the next step in the quote itself: who will ring, about what, and what the site engineer wants to see before deciding.

  • “Complaint follow-up wins trust”

    A tile that came loose needs a visit, a finding and a reply. A dealer who sees the brand come to site and say plainly whether it was surface, trowel or product trusts that brand more afterwards.

What we do

What we deliver for adhesive manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Trigger list

    Sample given, demonstration held, first order, quote sent and complaint raised, each with an owner and a next step.

    Result: Every event has a named person and a next action.

  2. Call scripts

    Short scripts for the dealer reorder call and the builder quote call, written around the questions to ask.

    Result: A sales person opens the call with the right question.

  3. Local-language message templates

    Messages for after a demonstration, after a sample and after a delivery, in the languages of your towns.

    Result: A follow-up message goes out in the mason's language.

  4. Lapsed-dealer review

    A list of shops that stopped ordering, each called once the trigger fires and the reason recorded.

    Result: Each lapsed shop has a reason on file.

  5. Complaint reply steps

    Receipt, visit, finding and reply, with the person responsible for each.

    Result: A complaint moves through four named steps and does not stall.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments after a demonstration, sample or quote that deserve a planned follow-up.

After a tile-fixing demonstration
A call to the dealer and the tilers present, asking whether they tried the bag. Record who tried it and what they said.
First order from a new dealer
A visit to check stock placement and damaged bags. The first order is the weak point, so log any damage claim at once.
Builder quote sent
A call that checks the tile area and the delivery date. Log the reason if the builder asks for a lower rate per bag.
Sample tin sent to a carpenter
A message asking if the joint held on their board. Note the board type and the answer.
Complaint resolved
A call a short while after the technical visit to confirm the floor is sound. It turns a complaint into proof that you answer.

Who it is for

This is written for these adhesive manufacturers.

  • Tile adhesive and tile grout manufacturers
  • Wood, ply and furniture adhesive makers
  • Flooring and vinyl adhesive producers
  • Construction bonding agent and repair mortar makers
  • Stone, marble and granite fixing adhesive makers
  • Wall putty and plaster additive producers
  • Sealant and silicone makers for building use
  • Regional bag-and-tin makers supplying hardware and tile dealers

Before you decide

When this may not be the right fit.

  • Your technical person cannot visit a site when a floor fails, so follow-up after a complaint would promise a visit you cannot make.
  • Nobody owns the list of open quotes and samples, so reminders would go to people who do not hold the account.
  • You have no demonstration routine, and a follow-up needs an event to follow.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for adhesive manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from adhesive manufacturers. Anything missing is noted in the written scope, with who will supply it.

The dealer ledger and visit notes
Order dates and visit notes for the dealers you want to follow up, in ledger, sheet or photograph. Without them we cannot tell a quiet dealer from a lapsed one, and the triggers are drawn blind.
Open quotes with their dates
Every quote sent to a builder or contractor, with date, site and status. You may hold back amounts. Without them the quote chase has nothing to chase, and old quotes stay silent.
A decision on the technical person's role
A statement of when the technical person joins a call, and when the sales person goes alone. Without it, every complaint waits for the technical person, and simple questions pile up.
A shared phone number for follow-up
A company number used for messages and calls to dealers and masons. Without it, history sits on personal phones, and a sales person who leaves takes the whole thread.
Dealers who asked for fewer calls
Any dealer or mason who has asked for fewer calls, with the reason. Without the list, follow-up reaches the very people who objected, and the goodwill of the counter suffers for it.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace three dealers from first order to silence

    We take three dealers, one that reorders, one that lapsed and one that never reordered, and trace every call and visit in the ledger. You see what happened between orders. What exists afterwards is a map of where follow-up is missing. We note the gaps between orders in plain words, without figures, and the sales person who owned each.

  2. 2

    List the triggers that need a call

    With the sales head we list the events that should prompt a call: a first order, a demonstration, a quote sent, a complaint, a gap since the last order. Each trigger names who calls. You decide which triggers the team can keep. The list is kept short, so the team can keep to it, and each trigger is tested against a real dealer.

  3. 3

    Write call scripts for the sales person

    We write short scripts for a first-order thank-you, a lapsed-dealer call and a quote chase, in the words your sales people use. The technical person approves anything about the product. Sales people try them on a real call and tell us what sounds wrong. Each script is one page, with the first sentence and the question to ask.

  4. 4

    Write messages in the local languages

    We draft short messages for confirming a demonstration, thanking a mason and nudging a quote, in the languages used in each town. A native speaker reads them aloud. You decide which messages go from the company number. Messages are short enough to read on a basic phone and carry the company name and the sales person's name.

  5. 5

    Set the complaint reply steps

    We write the order of response to a complaint: who replies first, who visits the site, who tells the dealer what was found. You decide the technical person's role. The steps stay on one page for the sales team. The steps are tested on a past complaint to check they would have worked. We note who tells the dealer, and what exact words are used.

  6. 6

    Read the lapsed list against the starting list

    After follow-up has run, we compare the dealers who reordered after a call with the lapsed list recorded before the work. We tell you which trigger worked, which was missed and whether the team can keep the pace. We record the calls made, as well as the orders that followed, so effort is measured honestly.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who does the follow-up, sales or the technical person?
Sales owns the relationship and the technical person joins for a failure or a specification question. Name an owner for each trigger, so two people do not call the same shop and no one calls another.
How long do we chase a quote?
Until the builder says yes, no or not now, with a reason. Record whichever it is. A quote left open forever hides the real position, so close it with a stated reason when the builder stays silent after your calls.
Is calling after a demonstration pushy?
A call that offers the method card, asks how the fixing went and offers a visit is service. A call that only asks for an order is what feels pushy. Keep the first call about the work on the floor.
Should the technical person join the follow-up call?
Yes, when the question is about a surface or a failed floor. A sales person can confirm stock, but a tiler trusts a technical answer on method. Because a wrong answer on site can fail a floor, let the technical person handle method and the sales person handle supply.
Is a call after a demonstration pushy?
Not if it adds something. A call that thanks the mason, answers a question raised on site and offers to visit a job is welcome. A call that only asks for an order is pushy. We write the call around one useful thing: a data sheet, a coverage figure or a site visit. If the mason says no, record it and stop.
How many calls should a quote chase include?
Chase as long as the quote is still open on the builder's side, and stop when they say it is closed. We set a rule for each quote: a call after it is sent, a second call with something new, and a final note that offers to reopen. The sales person records the reason when a quote is lost. Record the reason for a lost quote.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.