Skip to content
GullySales

Adhesive manufacturers · Buyer persona

Know the tiler, the dealer and the builder as three different buyers of one bag.

A buyer persona for an adhesive manufacturer is a written profile of one kind of buyer: what they decide, what they fear and whom they listen to. GullySales builds profiles for the tiler, the tile dealer, the builder and the carpenter from your own sales calls and site visits.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of chemical manufacturers at work in India

What buyer persona means

A buyer persona is a plain description of the kind of customer who actually buys from you. It includes what they search, what worries them and who else they ask before deciding. GullySales builds this from real enquiries and past sales rather than a generic template, then uses it to write every page and advert.

Last updated 14 Nov 2026.

For adhesive manufacturers

Where it usually goes wrong, and what we would do.

  • “The tiler fears the callback more than the price”

    A floor that fails means going back unpaid. The profile records the bag the tiler trusts, who taught them to use it and what would make them try another on a job.

  • “The dealer counts margin and headaches”

    A tile shop owner weighs margin, shelf space and the trouble of damaged bags. The profile notes whether a tile maker's own adhesive already sits on the counter and whose word settles the choice when a customer asks.

  • “The builder compares rate per bag”

    A builder or contractor buys for a whole floor and puts quotes side by side. The profile names who approves, who compares the quotes and what the site engineer must be shown before agreeing.

  • “The carpenter buys near the workshop”

    Wood glue is bought at the nearest plywood or hardware shop, on grip, drying and price. The profile records which shop the carpenter uses and which tin they would switch to for a better joint.

What we do

What we deliver for adhesive manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. One-page profile for each buyer

    Tiler, dealer, builder and carpenter, each on one page with role, worry, usual source of advice and what would change their mind.

    Result: Your sales team can read a buyer's profile before a visit.

  2. Decision map

    A sketch of who recommends, who approves and who pays on a builder order and on a dealer order.

    Result: A quote goes to the right person the first time.

  3. Call and visit notes

    Findings from your sales calls and site visits, written up under each profile in the buyer's own words.

    Result: Each profile traces to something your team heard.

  4. Objection list

    The reasons each buyer gives for not switching, with the reply your technical person stands behind.

    Result: A sales person has an honest answer ready for each objection.

  5. Message sheet

    What to say, to whom and where, matched to each profile, so the dealer pitch and the mason card stay different.

    Result: Each piece of material names the buyer it is written for.

How the result is measured

  • Enquiry match to persona
  • Conversion rate by persona
  • Content aligned to persona

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who is asking

The people who choose, stock and apply an adhesive, and what each asks first.

Tiler fixing a floor
Wants to know the notch, the working time and whether the bag works on the old tile in front of them. Hates a callback.
Tile dealer at the counter
Wants a margin, steady stock and a company that answers when a floor fails. Will recommend the bag with the fewest complaints.
Builder buying for a block of flats
Wants a delivered rate per bag, a supply they can schedule and a technical visit if a batch of tile is difficult.
Carpenter or kitchen maker
Wants a glue that holds board and laminate, in a tin size they can finish in a job. Buys from the nearest ply shop.
Architect or consultant writing a specification
Wants a data sheet, a method statement and a named product for the tile type, so the specification does not read as generic.

Who it is for

This is written for these adhesive manufacturers.

  • Tile adhesive and tile grout manufacturers
  • Wood, ply and furniture adhesive makers
  • Flooring and vinyl adhesive producers
  • Construction bonding agent and repair mortar makers
  • Stone, marble and granite fixing adhesive makers
  • Wall putty and plaster additive producers
  • Sealant and silicone makers for building use
  • Regional bag-and-tin makers supplying hardware and tile dealers

Before you decide

When this may not be the right fit.

  • You have not spoken to a tiler or a dealer about why they pick one bag, so a profile now would be the sales team's opinion.
  • Your sales are dominated by one dealer, and personas for other buyers would describe people you do not yet serve.
  • You want to use the profiles to set the scheme, but have not yet measured which buyer places the repeat order.

Before you decide

Agree the work. Know how to judge it.

Buyer personas for adhesive manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Write the decision the research must support, such as entering a market or choosing a buyer group. Separate what you know from sales records from what the team currently assumes.

Make the scope clear

Agree which buyers to speak to, which sources to review, and what access you can provide. Include lost enquiries and people who chose another supplier, where they are willing to take part.

Check the work in use

Look for source dates, sample limitations, and evidence that disagrees with the preferred answer. A recommendation should show how it follows from the findings.

Know when to change course

Do not treat a few positive conversations as proof of demand. Test the proposed offer with an actual buying decision before committing to a wider launch.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from adhesive manufacturers. Anything missing is noted in the written scope, with who will supply it.

The order book with buyer names
Invoices or order sheets showing who placed each order and through which dealer, for a span of months. A copy of ledger pages is acceptable. Without it, the profiles rest on opinion and cannot be tested. Order sheets with a name or phone are better than totals. If the book only holds dealers, we mark that and ask the sales team for the buyer behind each order.
A sales person who knows the counters
Someone from the team who has visited dealers for a long time and can speak to what the counters say. A few hours of their time is enough. Without them, the dealer profile is drawn from one visit of ours and misses the history of past schemes and complaints.
Permission to visit a live site
A contractor or builder who agrees we may watch and ask questions at a working site. Without a site, the tiler profile is drawn from conversation at a counter, which is less exact. A message from the contractor is enough. The profile of the tiler is then drawn from what we saw, not what we were told.
Notes of past complaints by person
A list of past complaints with the name and trade of the person who raised each: tiler, dealer or builder. Without it, the objection list is generic, and the message sheet answers worries that nobody has voiced to your sales team.
A list of rival bags on the shelf
The rival adhesives that dealers stock beside yours, as seen on the shelf during visits. We never name them on any page. Without the list, the dealer profile cannot say what your bag is being compared with at the counter.

How it works

How the buyer persona work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort the order book by who buys

    We take the order book and the visit notes and separate sales by the person who decided: the tiler, the dealer, the builder, the carpenter. You correct the sort. What exists afterwards is a rough count of who really chooses, drawn from your own records. We note which orders have no clear decision-maker, since those need a question to the sales person.

  2. 2

    Ride with the sales person to the counter

    We listen to what the dealer says when a sales person walks in, what they ask about margin and returns, and what they say about the last complaint. We write down the exact phrases, since the pages and scripts will borrow them. We also note how long a dealer lets a bag stay on the shelf before reordering, in the dealer's own words, not as a figure.

  3. 3

    Stand on a site with the tiler

    We spend time on a live site, watching how a tiler picks a bag, whom they ask and what they check before opening it. You decide which sites we may visit. What exists afterwards is a note of the fears behind the choice. We keep the notes in the tiler's language, translated only for the sheet.

  4. 4

    Interview a builder who compares rates

    With a builder or a contractor, we ask how they compare rate per bag, what coverage they assume and who signs off the purchase. They decline anything they prefer. We write the decision path in their words. We ask them how many bags a job needs and who checks the count, and write down every worry that stops an order. Their answers shape the builder's message.

  5. 5

    Write the profiles and the message sheet

    Each buyer gets a one-page profile with the worry, the question asked first, the person who influences them and the proof they trust. We read the profiles with your sales head and cut anything you cannot recognise. Each sheet fits on one page that the sales team can carry. The message for each buyer is written in the buyer's own words.

  6. 6

    Test the profiles against new orders

    As new orders arrive, the sales team marks which profile placed them. We compare against the records taken at the start and tell you which buyer is growing, which profile was a guess and which message needs rewriting. We then retire a profile that nobody matches and merge those that overlap.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How do we build profiles without a survey?
Start with your sales team and technical person. Ask them to describe the last few buyers who ordered and the last few who refused, and add notes from dealer visits. A real conversation beats an invented profile.
Is the tiler or the dealer the main buyer?
It differs by town. In some the dealer's word settles it, in others the tiler arrives with the bag name already chosen. The work records which it is, town by town, from what your team hears.
How many profiles do we need?
Only as many as there are different decisions. Start with the tiler, the dealer, the builder and the carpenter, and add a consultant profile if specifications drive your orders.
Is the tiler's view or the dealer's more important?
Both, in turn. The tiler picks the bag, but the dealer decides what sits on the shelf. A tiler cannot ask for a bag the shop does not stock. Write the tiler profile around trust in the method and the dealer profile around margin, stock and complaint handling.
Who decides, the tiler or the builder?
It depends on the job. On a small home job the tiler's word settles it. On a project the builder or contractor sets the rate and the specification. Your order book shows which, if you note who decided. We build the decision map from your records, so each profile is labelled with the part of the sale it controls.
Can one person be two profiles?
Yes. A tiler who also runs a small contracting team behaves as a tiler on site and as a builder at the counter. Note both on the profile and write the message for the moment you reach them. We keep the profiles few, because a long list makes the sheets unusable by the sales team. Keep the number small, because three or four profiles are enough and each should be one a sales person can recognise at once. Treat the sheets as working notes and revise them as the order book changes.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.