Adhesive manufacturers · Lead generation
Find the tile shops, builders and carpenters who will actually reorder your bag.
Lead generation for an adhesive manufacturer means building a list of buyers by role: the dealer who stocks, the tiler who asks for the bag at the counter and the builder who buys for a floor. GullySales works on the sources, the register and the way each enquiry is recorded against the town it came from.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for adhesive manufacturers
- CRM for adhesive manufacturers
- Follow-up systems for adhesive manufacturers
- SEO for adhesive manufacturers
- Social media marketing for adhesive manufacturers
- Content marketing for adhesive manufacturers
- Buyer personas for adhesive manufacturers
- WhatsApp marketing for adhesive manufacturers
- Digital marketing for adhesive manufacturers
Sales and marketing for adhesive manufacturers, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For adhesive manufacturers
Where it usually goes wrong, and what we would do.
“The tiler's name is worth more than the shop's”
A tile shop enquiry is one lead, but the tilers who walk in asking for a bag are the real demand. A demonstration day that ends with names and phone numbers in a register gives you leads who will recommend the bag back to the dealer.
“Builder enquiries arrive as calls, not forms”
A builder fitting out floors asks for a rate per bag and a coverage figure on a phone call. If the call is not logged with floor area and tile size, the quote cannot be compared later and the reason for a lost order stays unknown.
“A dealer lead goes cold on the first damaged bag”
A tile shop that found torn bags in the trial lot, or got no reply on replacement, will not reorder. Treat the first order as a lead that stays open until the shop has reordered or told you why it did not.
“Carpenter leads sit behind the plywood counter”
Wood adhesive in tins is bought at the hardware or plywood shop nearest the workshop. The lead is the shop, and the carpenters it serves become known only when the shop shares who asked for your tin.
What we do
What we deliver for adhesive manufacturers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Town-wise dealer list
A list of tile, hardware and plywood shops by town, with the adhesive brand each carries on the counter and the person who decides stock.
Result: Pick any town and read which shops carry which brand.
Demonstration-day register
A sheet filled at each dealer-side demonstration with the tiler's name, phone number, town and the type of tile being fixed.
Result: Every attendee is a named lead tied to the shop that hosted the day.
Builder enquiry sheet
A form for the sales person to record the project, floor area, tile size, rate quoted and the stated reason when a quote is lost.
Result: A lost quote carries a recorded reason, not a blank.
Source tag on every enquiry
Dealer, mason, builder, listing or website written against each enquiry at the moment it is received.
Result: Enquiries can be counted by source and compared town by town.
Dealer request page
A short page on the website where a tile or hardware shop asks to stock the product, giving the town and the brands now on the counter.
Result: A dealer request arrives with the town and current brands already filled in.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
The details that tell a dealer lead from a tiler lead from a one-off buyer.
- Dealer shop and town
- Record the shop name, the owner and the town at the first visit. The area sales person fills it, and it shows which towns have no stockist.
- Tiler name and mobile with consent
- Taken at a demonstration or a counter, with the tiler's agreement. It builds a register that a rival's scheme cannot reach.
- Brand of adhesive currently used
- Ask what the tiler or dealer buys now, in their own words. It tells you which bag you must displace and what to compare.
- Surface and job in hand
- Vitrified tile on old mortar, wooden flooring, marble fixing. The job decides which product and which method card to send.
- Builder floor count and tile area
- For a builder lead, note the floors and a rough tile area. It sizes the bags and separates a project buyer from a repair buyer.
- Source of the lead
- Demo, dealer referral, counter visit or site visit. Compare sources by orders placed, not by names collected.
Who it is for
This is written for these adhesive manufacturers.
- Tile adhesive and tile grout manufacturers
- Wood, ply and furniture adhesive makers
- Flooring and vinyl adhesive producers
- Construction bonding agent and repair mortar makers
- Stone, marble and granite fixing adhesive makers
- Wall putty and plaster additive producers
- Sealant and silicone makers for building use
- Regional bag-and-tin makers supplying hardware and tile dealers
Before you decide
When this may not be the right fit.
- Your dealer network has no stock in the target town, so a tiler or builder who asks for your bag would be sent to a rival's counter.
- Your field team cannot give a demonstration, and a mason who has not seen the bag used will not change brand on a name alone.
- You have no complaint-handling route, and one failed floor from a new buyer would undo the leads you worked to win.
Before you decide
Agree the work. Know how to judge it.
Lead generation for adhesive manufacturers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from adhesive manufacturers. Anything missing is noted in the written scope, with who will supply it.
- The dealer list with last order dates
- A sheet or ledger showing each dealer, town and the date of the last order. Photographs of ledger pages are acceptable if legible. Without it, we cannot tell a dormant dealer from a new town, and the lead plan treats every town as untouched.
- Notes from the last few site demonstrations
- Whatever the sales team wrote down after a demonstration: names, numbers, questions asked. Scraps and phone notes are acceptable. If nothing exists, we start the register at the next demonstration, and the plan has no history for the first comparison. Even a few pages of notes are enough to start the register.
- A sales person for each town cluster
- Every cluster of towns needs a named sales person who will return the call within the working day. Without one, leads arrive and wait, and a dealer who asks for stock and hears nothing moves to the rival bag. The name goes on the town sheet, so a lead is never left without an owner.
- The scheme terms printed for dealers
- Any discount, scheme or credit rule dealers are told about, as printed or messaged to them. We need the exact wording. Without it, the dealer request page promises nothing about terms, and each dealer is told to speak to the sales person. Photographs of a printed scheme card work as well as a typed copy.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Open the dealer ledger and the call book
We start with the dealer ledger, the invoice book and the call notes your sales people keep, with the sales head beside us. We mark which towns order, which stopped and which were never visited. You decide which towns you want opened first, and we write them on one sheet. The sheet lists the towns by name, so the sales head can see what is open and what is closed.
- 2
Ride along on a dealer visit
We join a sales person on a round of tile shops and building-material yards, and listen to what the counter says about your bag, the rival bag and the last complaint. What exists afterwards is a note of the objections in the dealer's own words. We also note which dealers asked for stock help, since those are the warmest.
- 3
Sit with a mason during a demonstration
At a demonstration day or a live site, we watch which tilers and masons stay, ask questions and give their numbers. You decide what is asked of them. We write the register columns together: name, town, trade, shop they buy from, and consent to be called.
- 4
Build the enquiry sheet for builders
Builders ring or message with an area, a brand they use and a site address. We design one sheet that catches those details the same way every time, and we tag each line with its source. You confirm who answers builder calls and who visits the site.
- 5
Read each source against the starting register
After the demonstration days and dealer requests have run, we compare the named leads, first orders and repeat orders with the register recorded before the work. We tell you which source produced reorders and not only names, and which you should stop paying for. We keep a note of what each source cost in sales time as well.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Which lead is worth more, the dealer or the tiler?
Should we buy a list of builders?
When is a name a lead and not just a contact?
Can we run a scheme to collect tiler names?
How many sales people do we need to follow up the leads?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for adhesive manufacturers
Related work to consider.
Closest to this: leads and follow-up
Also for adhesive manufacturers
Or start from the overview: sales and marketing for adhesive manufacturers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.