Skip to content
GullySales

Aluminium die casting companies · CRM

Keep each model, quote and sample in one record the whole sales desk can read.

A CRM for a die caster is a shared record of every enquiry, quote, die order and repeat order, kept against the part and the buyer. GullySales works on setting up the fields, the stages and the habits that keep it current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For aluminium die casting companies

Where it usually goes wrong, and what we would do.

  • “A die quote runs across several calls”

    One job moves from enquiry to feasibility to quote to die approval to sample to first lot. When these steps live in personal notes and chats, a colleague who picks up the call has to start again. A single record shows where each job stands.

  • “Part and buyer must both be recorded”

    A buyer may send three housings, and each has its own alloy, volume and die. A record kept only by company name loses that detail. Fields for part, alloy, volume and die status keep the quote tied to the actual casting.

  • “Lost quotes teach the next one”

    A quote that did not convert holds a reason, such as inclusions, die cost or a rival's date. If the reason is never written down, the same mistake repeats. A short lost-reason field costs seconds and informs the next quote.

What we do

What we deliver for aluminium die casting companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A pipeline built around die jobs

    Stages that match your work: enquiry, feasibility, quote, die approval, sample, first lot and repeat order.

    Result: Every job sits at one clear stage.

  2. Fields for part, alloy and volume

    A set of fields that capture the casting details, the launch date and the die status for each opportunity.

    Result: A quote can be found by part, alloy or buyer.

  3. An import of existing records

    A clean-up and import of the quotes and contacts now spread across sheets, email and phones.

    Result: One list replaces the scattered ones.

  4. A short guide for the sales desk

    A plain page on what to enter after each call and who owns each stage.

    Result: Each person knows what to record and when.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep these fields on every die casting opportunity.

Part name and model file link
The engineer who first received the enquiry fills it. It lets anyone quoting find the exact casting without asking for the file again.
Alloy and finishing steps
Filled when the quote is built. It separates a bare casting from one with machining and coating, which explains price gaps later.
Die status
The tool room lead updates it from design to try-out to approved. It tells the sales desk what to say when a buyer asks about the schedule.
Sample feedback
The account owner records what the buyer's fit and porosity check showed. It decides whether a first lot can be planned.
Lost reason
Filled when a quote is closed lost, such as inclusions, die cost or a rival's date. It informs the next quote on a similar part.

Who it is for

This is written for these aluminium die casting companies.

  • Two-wheeler and four-wheeler die casters supplying engine and chassis parts
  • Electric vehicle component die casters making motor and battery housings
  • LED lighting and electrical housing die casters
  • Pump, compressor and appliance die casters
  • Gravity and low pressure die casting units
  • Die casters with in-house die making
  • Die casters with machining, leak testing and powder coating
  • Small die casting job-work shops serving other manufacturers

Before you decide

When this may not be the right fit.

  • Only the owner takes enquiries and holds them in mind, so a shared record would add data entry with no one else to read it.
  • You have a handful of live accounts and each is tracked well on one sheet, so a CRM would add cost without new information.

Before you decide

Agree the work. Know how to judge it.

CRM for die casting companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium die casting companies. Anything missing is noted in the written scope, with who will supply it.

Existing quote sheets and email threads
Wherever quotes live today: spreadsheets, a folder of PDFs, a mailbox. Messy is acceptable. Without them the import has nothing to bring in, and the new record starts empty beside a pile of history nobody can search. Include older files too if they still matter to buyers who may return with a revised part or a new model.
A list of the die jobs now running
The jobs in the tool room or in production, with the part, buyer and die status. A single list is fine. Without it we cannot link repeat orders to their original die, which is the main reason to keep the record. A status such as in trial, approved or in production is enough for each job in the list.
The sales desk's time for a trial
The people who will enter data must try the new structure on real jobs. A short sitting is enough. If they do not, the first weeks of live use expose faults while buyers are waiting for replies. Plan the sitting at a quiet point in the week and keep it practical, with live quotes on screen and not a demonstration.
Your rule on who sees die cost
A decision on which figures only management may view, such as die cost and margin. Only you can decide. Without it, we hide the figures from everyone, and the desk quotes from memory. Management may want to see die cost and margin, while the desk sees only the piece price. A short list of who sees what is enough for us to set access.
Contact details for repeat buyers
Names, roles and current email and phone for buyers who ordered before. Old entries may be stale; tell us which. Without current contacts, the repeat-order view lists buyers nobody can reach. If buyers have moved on, mark the entry rather than delete it, because the old name can lead to the new contact when a repeat order comes in. A phone call to confirm is worth the effort for the larger accounts.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one die job from quote to repeat order

    We follow a real job through the sales desk: enquiry, feasibility note, quote, die approval, samples, first supply and repeat order. You tell us where information gets lost. That path decides the pipeline stages, so the record matches how die jobs run. We note every handover between people, because a handover is where a die quote can go missing between two desks, and the record has to close those gaps.

  2. 2

    Choose the fields for part, alloy and volume

    We draw the fields a die quote needs: part name, drawing number, alloy, expected volume, die cost, piece price and the person who asked. You strike what the desk would not fill in. We keep die cost in a restricted field. Fields that sound clever but are never filled are removed, so the desk sees only what it will use on a call.

  3. 3

    Pick the tool the desk will actually open

    We compare a shared sheet and a simple CRM against your team's habits and say which fits. You choose. Cost, access and the people who will use it decide the matter, and we write down who owns the setup afterwards. We also check that the tool can export your data in a plain file, so the shop is never locked in to a product.

  4. 4

    Import the old quotes and test a job

    We load existing records from sheets and email into the new structure, cleaning duplicates with the desk. We then run a test job through every stage, checking that part and buyer are both recorded. Errors are fixed before real work is entered. Duplicate buyers and part numbers entered two ways are merged by hand with the desk, because a wrong merge is hard to undo.

  5. 5

    Hand the desk a one-page guide

    We write a short guide: what is entered at each stage, who enters it and what to do with a lost quote. The desk reads it with us and says what is unclear. You confirm the rules, and the guide is pinned beside the screen. It also says what to do when a buyer changes a part and the quote must be revised.

  6. 6

    Read repeat orders and lost reasons

    After use we read the record for repeat orders linked to their original die job, quotes still open and the reasons recorded for lost ones. You decide which fields to add or drop. Nothing here promises more orders, only a clearer record. We look at the lost-quote reasons together, since they show whether the shop loses on die cost, piece price or something else.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should a die caster use?
Choose one your team will actually open each day. We work with the common tools in use in India and pick by fit, cost and ease, not by brand.
Can the CRM show repeat orders?
Yes, if repeat orders are entered against the part. Without that entry the record cannot show which buyers keep returning.
Should die cost be stored in the CRM?
Store the quoted die cost on the opportunity, but limit who can see it. The sales desk needs it to answer questions, and the owner may not want every user to see margins. Set permissions at the start.
How do we link a repeat order to the original die job?
Keep the part and die reference on the account, then create each repeat order as a new opportunity against it. This keeps the die history intact and lets you see which tools are idle between orders.
Who should own the CRM at a plant with no IT person?
Someone on the sales desk should own it, with the sales head as backup. The work is a few minutes of tidying, not technical. We set it up so no code is needed and write down the steps for adding a user, removing one and exporting the data. If a problem needs expertise, we flag it and tell you who to ask. Each time someone leaves, we remove their access and hand their open quotes to a named colleague. Ask us if help is needed.
Can we bring our spreadsheet history into it?
Yes, as far as the sheets allow. We map your columns to the new fields, clean duplicates with you and import what is clear. Rows that cannot be matched are kept in a separate file for later. The old sheets stay untouched, so you can check any entry against the original if a quote is ever disputed. Duplicates and blank cells are cleaned with you before the import runs, and we never alter a figure that we cannot check against the source.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.