Skip to content
GullySales

Aluminium die casting companies · Follow up systems

Chase every quote, sample and open die with a plan that does not depend on memory.

A follow-up system for a die caster is a fixed set of steps after each quote, die approval and sample, with a named owner for each. GullySales works on the sequence, the messages and the reminders that keep a quote from going quiet.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For aluminium die casting companies

Where it usually goes wrong, and what we would do.

  • “A quote goes silent after it is sent”

    The buyer reads the quote, compares it with two others and moves on to other work. If nobody calls, the quote sits. A planned follow-up that asks one useful question each time keeps the conversation alive without nagging.

  • “A sample is also a follow-up point”

    When a sample goes to the buyer's machining shop, the next step is a call to ask what the fit and porosity check showed. Some shops send the sample and wait. A reminder tied to the sample dispatch closes that gap.

  • “A repeat order is earned between orders”

    A running account is held by delivery and prompt correction, and by a call when the schedule changes. A follow-up routine for live accounts, set by the account owner, catches a drop in schedule before a machine goes idle.

What we do

What we deliver for aluminium die casting companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A follow-up sequence per stage

    A set of steps and messages for after the quote, after the die approval and after the sample, each with an owner.

    Result: Every stage has a next step with a name beside it.

  2. Message templates for call and WhatsApp

    Short, polite messages that ask one question, to be adapted by the engineer sending them.

    Result: A bank of messages the team can use and adapt.

  3. A reminder routine

    A way to set the next contact date inside the CRM or a shared sheet whenever a quote is sent.

    Result: No open quote lacks a next contact date.

  4. A live account review

    A short checklist for talking to running customers about schedule, quality and upcoming models.

    Result: Each live account has a named person who calls it.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Plan the message for each moment in a die job.

Quote sent
A short note asking if the inclusions are clear and when the buyer expects to decide. Record the answer against the quote.
Die design approved
A confirmation of the agreed die plan and sample steps, sent to the design engineer and recorded so the tool room can see it.
Sample dispatched
A message asking the buyer's quality head what the fit and porosity check showed. Log the reply in the record.
Schedule change on a running part
A call to the account owner at the buyer when volume drops, to learn why before a machine goes idle.
Quote closed lost
A polite note asking for the reason, with thanks. The answer goes in the lost-reason field for the next quote.

Who it is for

This is written for these aluminium die casting companies.

  • Two-wheeler and four-wheeler die casters supplying engine and chassis parts
  • Electric vehicle component die casters making motor and battery housings
  • LED lighting and electrical housing die casters
  • Pump, compressor and appliance die casters
  • Gravity and low pressure die casting units
  • Die casters with in-house die making
  • Die casters with machining, leak testing and powder coating
  • Small die casting job-work shops serving other manufacturers

Before you decide

When this may not be the right fit.

  • Quotes are sent without an owner or a next contact date, so a sequence would run on nobody's name and nothing would be sent.
  • You run a small job-work shop where two buyers account for all work, and a call to each already covers every moment.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for die casting companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium die casting companies. Anything missing is noted in the written scope, with who will supply it.

The quote file with outcomes marked
A file of quotes, with the desk's note on which were won, lost or never answered. Rough marks are fine. Without them there is no baseline, and we cannot say later whether the sequence changed anything. Add a note on any quote lost for a reason you know, such as a price gap or a buyer's change of plan.
A list of open samples
Samples sent and awaiting buyer approval, with the buyer and the date dispatched. Without this list, the sample follow-up has nothing to attach to, and we start with a sequence that cannot be tried on a live case. Include the date of dispatch and the person who received it at the buyer's plant, where you know the name.
Named owners and deputies
A person for each stage, and someone who covers when they are on a plant visit. A one-line list is enough. If owners are not named, reminders land with the whole desk and nobody acts on them. If the sales head covers all stages for now, say so, and we plan the first run on that basis and revisit it later.
Your rule for closing a quote
How many attempts the shop makes and when a quote is marked lost. Only you can decide. Without a rule, quotes stay open for ever, and the pipeline overstates what may come. Choose a number that suits your accounts, since a large buyer expects patience that a small start-up does not. Write it down so the desk follows the same rule.
Access to the buyer's preferred channel
Whether the buyer replies on email, a call or WhatsApp, noted per account. A column in the sheet is enough. Without it, messages go to the wrong channel and a good buyer seems silent. Some buyers answer only on a call and others only on a chat. Put a note in the sheet for the accounts you know well.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the quote file for silent quotes

    We open the quote file with you and mark quotes that went quiet after being sent, samples with no response and orders that never repeated. These marks become the baseline. You tell us which cases cost the shop work, so we begin there. We start with the quotes that carried a real volume and a real target date, and ignore the small ones.

  2. 2

    Decide who owns each stage

    We list the stages after a quote: sent, die approved, sample dispatched, sample reviewed, first supply. You name an owner for each and a deputy. We write the names down, since a stage with two owners is left to neither. The deputy sees the same record, so a plant visit or a day of leave never stops a reminder from being answered.

  3. 3

    Write the message for each point

    We draft the call script and the WhatsApp or email message for each stage, with the single question it must end on, such as whether the drawing is frozen. The sales desk reads them aloud and changes whatever sounds unlike the plant. We prefer one clear ask per message, since a buyer asked three things at once may answer none. The question also helps the next person read the record.

  4. 4

    Set the reminder rules and close rules

    We agree when a quote is considered cold, what the last message says and who closes the record. You decide how many attempts the shop will make. These rules go into the CRM or the sheet, so a reminder appears without anyone remembering. Reminders appear on the owner's screen, and the closing rule runs the same way for every account, which is fair to the buyer.

  5. 5

    Run two live quotes through the sequence

    The desk takes two open quotes and follows the sequence exactly. We sit with them, note where a message felt awkward and rewrite it. You review how the buyers replied before the sequence is used on every quote. We watch for any buyer who replies only to the first message, and note it, since that tells us about the channel.

  6. 6

    Review a live account against the baseline

    We pick one buyer's account and read it from first quote to repeat order, then compare quotes revived and samples answered with the marks made at the start. You decide what to change in the sequence. No reply rate is promised. The review covers the whole life of the account, including how the replacement of a die or a change of part was handled.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should we chase a quote?
There is no single rule. Set the next contact according to the buyer's own launch date and the stage the job is at, and always bring something useful to the call.
Will automated messages work for us?
Reminders for your own team help. Messages sent to buyers should come from a person, since each quote has detail only the engineer knows.
Who should own the sample follow-up?
The account owner who sent the quote, not the tool room. They know the buyer and the questions to ask. The tool room supplies the dispatch date, which sets the reminder, but the call belongs to sales.
What if a buyer replies only to the first message?
Move the contact to a person who owns the decision. If the sourcing lead answers once and goes quiet, ask the design engineer a technical question instead. A different question from a different role gives a stalled quote a new opening.
Who owns the follow-up when the sales engineer is on a plant visit?
The named deputy owns it. Each stage lists an owner and a deputy, and the reminder goes to both. The deputy has the same message wording and access to the same record, so a buyer is not left waiting because one person is away. We check the cover arrangement with you, since a deputy who has never seen the file cannot follow up well. A buyer who sees a prompt answer from the deputy keeps faith in the shop. Set it up before anyone travels.
What do we do with a quote that has gone cold?
Send one last message that asks a closing question, such as whether the project is on hold, then mark the quote as cold with a reason. Cold quotes stay in the record, and the repeat-order view lists them again when the buyer's next project appears. You never delete them, because a cold quote today can become a question next year. That final message is polite, short and gives the buyer an easy way to say yes or no. We write it with you.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.