Aluminium die casting companies · Lead generation
Bring in enquiries that arrive with a model, a volume and a launch date.
Lead generation for a die caster means reaching the sourcing and design engineers who have a housing or cover to cast and a die to fund. GullySales works on the part pages, the enquiry form and the buyer lists that bring in those enquiries.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for aluminium die casting companies
Sales and marketing for aluminium die casting companies, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For aluminium die casting companies
Where it usually goes wrong, and what we would do.
“A drawing is the real enquiry”
A purchase engineer who attaches a 3D model and a yearly volume is ready for a die quote. A visitor who types only a part name is still browsing. The enquiry form should ask for the model, the alloy and the volume, so the two kinds of visitor are told apart on arrival.
“Auto is only one door”
Lighting, electrical, pump and e-mobility makers all buy die castings, yet few think of a two-wheeler shop as their supplier. Lead generation for a die caster includes naming those sectors on the site and building a list of the makers who send housings out for casting.
“A start-up enquiry needs a different first reply”
A scooter start-up with a launch date needs the die schedule and sample steps explained at once, while an established auto buyer wants the quality plan first. Sorting enquiries by who is asking decides which pages and attachments go back in the first answer.
What we do
What we deliver for aluminium die casting companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Part-family landing pages
Separate pages for housings, covers, heat sinks and brackets, each carrying tonnage, alloy grade and finishing steps, with a form that asks for the model and volume.
Result: A visitor with a bracket drawing reaches a page for brackets, not a general machine list.
A buyer list outside auto
A researched list of lighting, electronics, pump and appliance makers in your region, with the housing each one would send out for casting.
Result: A named list you can work through, each name tied to a part.
An enquiry sheet for the sales desk
One sheet that records the model, alloy, volume, launch date and source of every enquiry, so the engineer quoting sees the full picture.
Result: Every enquiry shows its source and its volume on one line.
A first-reply pack
Standard attachments for new enquiries: the die and sample plan, the quote layout and the inspection page.
Result: A new enquiry gets the same clear pack each time.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
Capture these details on every die casting enquiry.
A casting enquiry is only quotable once a few facts are on one line. These are the ones worth asking for at the form and on the first call.
- 3D model or drawing file
- The engineer quoting opens it to judge wall thickness, draft and undercuts. Without it the enquiry stays a part name and cannot reach a die quote.
- Alloy and finish named by the buyer
- Whether the buyer wants a standard die casting alloy, machining or powder coating changes the piece price and the tooling plan, so record it before quoting.
- Yearly volume and first lot size
- The die is paid for once and spread across volume. A buyer who cannot name a volume needs a different first reply from one who can.
- Launch date for the first sample
- A scooter start-up working to a launch date needs the die and sample steps explained at once. Log the date so the reply is ordered by it.
- Where the casting is used
- A motor housing, a lamp body and a pump cover carry different leak and finish demands. The end use tells the quoting engineer which inspection plan to attach.
Who it is for
This is written for these aluminium die casting companies.
- Two-wheeler and four-wheeler die casters supplying engine and chassis parts
- Electric vehicle component die casters making motor and battery housings
- LED lighting and electrical housing die casters
- Pump, compressor and appliance die casters
- Gravity and low pressure die casting units
- Die casters with in-house die making
- Die casters with machining, leak testing and powder coating
- Small die casting job-work shops serving other manufacturers
Before you decide
When this may not be the right fit.
- You have no engineer free to read a model and reply within the working day, so more enquiries with drawings would only sit unanswered.
- Your machines are full for the coming launches and you cannot take a new die, so new enquiries would only be declined.
Before you decide
Agree the work. Know how to judge it.
Lead generation for die casting companies: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from aluminium die casting companies. Anything missing is noted in the written scope, with who will supply it.
- The enquiry and quote files of past years
- The folder, mailbox or register where enquiries and quotes are kept, in whatever state. Gaps are acceptable. Without it we cannot see where past work came from, and the baseline sheet begins empty, so later results have nothing to be compared with. Folders and mailboxes are both welcome.
- A machine list with tonnage and cells
- A list of the machines, their tonnage and the parts each runs, plus what is booked. A single sheet will do. Without it we cannot write what the pages and the form promise, and we may attract enquiries that no cell can take.
- Sectors you want and sectors you decline
- Your choice of the buyer sectors worth chasing, such as lighting, pumps or electric vehicles, and those you decline. Only you can decide it. When it is missing, the plan treats every enquiry alike, and the sales desk spends time on work you would refuse.
- The person who opens new enquiries
- A named person at the plant, with a deputy, who opens the shared address and the phone line and records each enquiry. If nobody owns this, the test model sits unread and the first real buyer waits without a reply. A deputy is named in case of leave or a visit.
- Your rule for a feasibility note
- A written rule for when the tool room spends time on a drawing before a quote: a stated volume, a target date, a clear material. A rough version works. Without it, every enquiry gets the same effort and the tool room is overloaded.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
List the machines and parts the cells suit
We sit with the plant head and write down which machines, tonnages and cells are free and what each suits, such as thin-walled housings or heavier covers. You decide which enquiries you will decline, so that new work never promises what the shop floor cannot cast.
- 2
Sort last year's enquiries by source
We go through the enquiry file and mark where each drawing came from: a directory, a customer reference, a visit or a trade contact. The source column becomes the baseline sheet, and you correct any entry that you remember differently from the file. Gaps in the file are marked, not guessed.
- 3
Write the part-family promise
We choose the part families you want more of, such as housings, covers and brackets, and draft the line each family page and the enquiry form will carry. You approve every statement about alloys, machining and finishing, since a buyer reads these as commitments.
- 4
Send a test model through the form
We submit a dummy drawing and model through the form, the shared address and the phone line, and follow it to the sales desk. We note who opens it, which questions come back and where it is recorded, and we correct the handoff before real buyers arrive.
- 5
Rehearse the first reply with the desk
The sales desk practises the reply for a start-up with a rough sketch and for an established buyer with a full model. You decide at which point an enquiry earns a feasibility note from the tool room, and we write that rule on the enquiry sheet.
- 6
Read enquiries by source against the baseline
After launch we compare the sheet with the one made from last year's file. You see which source brought drawings with a volume and a target date, and which brought only loose questions, then decide where to put effort. Nothing here promises a count of enquiries.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Should we chase every enquiry that comes in?
Can lead generation fill idle machines?
Which die casting enquiries are worth a feasibility note?
Can lead generation bring buyers from lighting and pump makers?
Who should hold the enquiry sheet at the plant?
What do we send a buyer who has only a sketch?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for aluminium die casting companies
Related work to consider.
Closest to this: leads and follow-up
Also for aluminium die casting companies
Or start from the overview: sales and marketing for aluminium die casting companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.