Skip to content
GullySales

Marble processors · Website

Build a website that shows the stack before the buyer drives to the yard.

A website for a marble processor is a set of pages that show your stones, your cutting work and your yard, and take an enquiry that names the job. GullySales designs the site around stone pages, a whole-job quote request and a clear route to the yard, and builds it to load on a mason's phone.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A supervisor shows granite and marble slabs to an architect

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For marble processors

Where it usually goes wrong, and what we would do.

  • “The buyer is judging stone on a small screen”

    Veining and shade are hard to see in a compressed image. Full-slab photographs, close crops of the polish and honest captions help the buyer decide whether the trip is worth it.

  • “A catalogue of names helps no one without detail”

    A list of marble names with no photograph, thickness or use is a rate card in disguise. Each stone needs its own page with enough to compare it against another.

  • “The enquiry form is the shop counter”

    If the form asks only for a name and phone number, the yard learns nothing. Asking for rooms, area, stairs and city lets the first reply be a quote conversation.

  • “The yard visit is the end of the page”

    A site that does not say where the yard is, which gate to use and when it is open sends buyers back to the map. Directions, hours and a visit booking belong on every page.

What we do

What we deliver for marble processors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stone pages with full-slab photographs

    A page for each stone with photographs, finish, thickness, use and an enquiry form.

    Result: Each stone you hold has a page you can send to a buyer.

  2. Whole-job quote request

    A form that collects rooms, area, stairs, skirting, sills and city in one go.

    Result: An enquiry arrives with the job described.

  3. Cutting and finishing pages

    Pages for staircase, skirting, vanity and wall cladding work, with what the yard cuts and polishes.

    Result: A buyer sees the yard can do the whole job.

  4. Yard and visit page

    Address, map, gate, hours, parking, loading and a visit booking form.

    Result: A driver can reach the right gate without a phone call.

  5. Mobile-first build

    Pages built to load and read on a phone, with a tap to call and a tap to message on WhatsApp.

    Result: A mason on site can open and share a stone page.

  6. Easy update panel

    A way for your staff to change stones, photographs and stock dates without a developer.

    Result: The site shows current stock, not last season's.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Let a buyer see the stack on a small screen before driving out.

Full-slab photographs in daylight
Each stone page shows a whole slab and a close view, with lot noted. A family can judge the veining without driving to the yard.
Quote request for the whole job
A form that asks for rooms, area, stone and stage of building. The yard replies with a total, not a rate per foot.
Cutting and finishing services
A page on edge profiles, polishing and steps, with photographs of finished pieces. It tells buyers the yard does more than sell slabs.
Visit the yard
Directions, opening days, parking for trucks and the name of the person who will meet them. It ends the page with the real next step.
Stock now in the yard
A list updated by the staff, with sold stones moved off. A buyer then trusts what they see.

Who it is for

This is written for these marble processors.

  • Indian marble processors working with white, beige and green stone
  • Importers and processors of Italian, Turkish and Spanish marble
  • Marble floor and staircase contractors who own a cutting yard
  • Temple and idol marble workshops buying from processors
  • Marble dealers with a polishing and edge-cutting line
  • Processors supplying bathroom, vanity and wall cladding work
  • Inlay and decorative marble unit owners
  • Wholesale marble traders selling to retail yards in smaller towns

Before you decide

When this may not be the right fit.

  • Staff will not update the stock list, and the site would show stone that has gone.
  • The photographs are all of cut tiles and none of whole slabs, which should be fixed before the build.
  • You expect an online shop to sell slabs by post, which suits neither stone nor its shade variation.

Before you decide

Agree the work. Know how to judge it.

Website for marble processors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from marble processors. Anything missing is noted in the written scope, with who will supply it.

A stock list with thickness and finish
Give us the stones held, their thickness, their finish, the lot and the size of the slabs on the stand, since a mason searching by size should find the page. Each page is built from it. If it is vague, the page says less, and buyers must ask by phone.
Photographs taken to our list
Send original pictures of each slab and of cut work such as stairs, skirting and borders, with the name of the stone written on a slip beside each. Phone photographs in daylight are enough. Where pictures are missing, the stone page waits, since a poor picture misleads.
A list of the cutting work you do
Tell us what the workshop cuts: stairs, skirting, borders, vanity tops, inlay, and whether it takes dimensions from the customer's drawing or measures on site. A buyer looks for it. Without the list, the site shows slabs only, and the cutting trade goes unseen.
Domain and hosting details
Give us the registrar login and the hosting details, or the person who holds them. Without these we cannot place the site on your address, and the launch waits until the registrar confirms who owns the name.
A person who will update stock
Someone at the yard must add and remove stones as stock changes. Name them now and we train them on a phone, with a real slab photograph from the stack. If nobody is named, the site goes stale and shows stone you no longer hold.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Load your current pages on a mason's phone

    We open your present site or listings on an ordinary phone with a weak connection, the way a mason on a site would. We note what loads, what can be found and what is missing. Say which of your pages are worth keeping. This tells us what to build and what to retire.

  2. 2

    List the stones, finishes and cutting work

    We go through the stack and the workshop with the manager and list each stone with its thickness and finish, and each cutting job you do: stairs, skirting, vanity tops, wall panels. You tell us which you want shown. Each becomes a page or a section.

  3. 3

    Photograph full slabs, close surfaces and cut work

    For each stone we agree the pictures needed: the full slab, a close shot of veining, a polished sample, and for cutting work, a finished piece. Your staff take them in daylight. We check each for sharpness and ask for a retake where the colour looks wrong.

  4. 4

    Write the whole-job quote request

    A visitor should be able to describe a job: the room, the area, the stone liked, when it will be laid. We design the request with the counter staff so it asks what they would ask at the stack. You decide who receives it and how soon it is read.

  5. 5

    Write the yard and visit page

    We write the page that shows where the yard is, whether lorries and tempos can reach the gate, how to reach it, the hours the counter is staffed and what to expect at the stack. We add a map pin and the entrance photograph. The owner reviews it, since a visitor who cannot find the gate is lost.

  6. 6

    Hand over the update panel, read enquiries

    We show the staff how to add a stone, mark one sold and change a photograph. After launch we compare the enquiries that named a stone with the counts noted before the site. You see which pages drew visitors and decide which to rewrite.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need an online shop?
Not for stone. The buyer wants to see the slab and agree a rate for the job. A site that takes an enquiry and brings the buyer to the yard fits how marble is bought.
Who owns the website?
You do. The domain, the pages and the photographs should be in your name, with logins held by the owner. We set it up so you are not tied to us.
Can staff update stock themselves?
Yes. We build the site so staff can change stone entries and dates from a phone or computer. A dated page that someone keeps current is better than a perfect one left to age.
Do we need an online shop?
No. A buyer cannot judge a slab's veining and shade from a small image alone, so the sale still needs a visit or a sample. A quote request form and clear photographs do the job. Leave payment to the counter, where the lot is confirmed.
Is a payment gateway needed on the site?
Not for a typical yard, since the buyer wants to see the stone and agree a whole-job quote before paying. The site should take enquiries and quote requests. Payment follows the quote and the visit, through the channels you use now. If you sell small items such as sealants, a simple order form is enough. We would not add a gateway without a clear reason.
Who owns the site and its content once it is built?
You do. The domain, the hosting account and the content should be in your name or the company's, with the login held by the owner. We hand over the details at launch and list what we built. If another vendor wants to take over later, you can give them access. Keep a copy of your photographs outside the site too.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.