Skip to content
GullySales

Metal forging companies · Website

Build a site where a purchase head finds equipment, grades and certificates in one visit.

A website for a forge is the place where a buyer checks the equipment, weight range, grades and certificates before sending a drawing. GullySales works on the page structure, the technical wording and the route for drawings.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Inspectors check forged shafts and formed metal parts

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For metal forging companies

Where it usually goes wrong, and what we would do.

  • “The first visit is a checklist”

    A purchase head or quality head opens the site with questions: what weights, which grades, which certificates, what equipment. A site that answers those in the first screens keeps the visitor. A site that says only quality forgings sends them back to the search results.

  • “Hot work is hard to photograph”

    Furnaces and dies do not look like much, and a stock photograph of sparks tells the buyer nothing. A sectioned part, the finished forging beside its drawing and the inspection bench say more. The photographs are of your own shop.

  • “Large drawings need a proper upload”

    Drawings arrive as PDFs, images and CAD files. A form that accepts them, asks for grade, weight and quantity, and tells the sender what happens next beats a bare email address. The enquiry then reaches one named person.

  • “The buyer opens it on a phone”

    A purchase head or an engineer on a plant visit opens the site on a phone. Tables of grades and weights have to be readable there, and the call and WhatsApp buttons have to work. A site built only for a desktop loses that reader.

What we do

What we deliver for metal forging companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A site map by product family

    Pages for flanges, shafts, rings, auto forgings and valve bodies, plus certificates, equipment and contact.

    Result: A structure where each page answers one buyer question.

  2. Equipment and capability page

    A page listing the presses and hammers, the weight range, the sizes and the grades, with photographs from the shop.

    Result: A buyer can see whether the equipment suits the part.

  3. A certificates and inspection page

    A page explaining heat numbers, test certificates and inspection options, with a sample that hides buyer details.

    Result: The quality head finds the paperwork view without asking.

  4. An enquiry form for drawings

    A form with file upload, fields for grade, finished weight, yearly quantity and end use, and a clear reply route.

    Result: Each enquiry arrives with the details needed to price it.

  5. A photograph plan

    A shot list for the press, the part, the sectioned cutaway and the inspection bench.

    Result: A list of images that replaces stock photographs.

  6. A phone-first check

    A review of every page on a phone, including tables, buttons and the enquiry form.

    Result: Each page reads and works on a small screen.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Pages buyers look for

The pages a purchase head and a quality head open on a forge's site.

Equipment and capacity page
Lists presses and hammers with capacity and the part weight range. A quality head reads it to check you can take their part.
Certificates and testing page
Shows a sample test certificate, the instruments at the bench and the standards you work to. Replaces the unseen paperwork that worries a first-time buyer.
Product family pages
One page each for flanges, shafts, rings, valve bodies and auto forgings, with grade, weight band and a photograph of a finished part.
Sectors served page
Names the sectors you supply without naming customers. Gives a valve maker proof that you know their kind of part.
Send a drawing page
A form that asks for drawing, grade, weight, quantity and end use, plus a WhatsApp route. This is the page that turns a visit into a quotable enquiry.

Who it is for

This is written for these metal forging companies.

  • Closed die forging shops for auto and two-wheeler components
  • Open die forgers of shafts, rings and large blocks
  • Ring rolling units making bearing races and flanges
  • Valve and flange forgers for oil, gas and process plants
  • Railway and heavy engineering forgers
  • Hand tool and agricultural implement forgers
  • Cold and warm forging units for fasteners and small precision parts
  • Forge shops with in-house machining and heat treatment

Before you decide

When this may not be the right fit.

  • You have no photographs of your own parts or presses, and a site full of stock sparks would lose the trust you are trying to build.
  • Your weight range and grades are not written down anywhere, so the pages would be vague and a new site would repeat the old one.
  • Nobody will update the site when a new press or certificate is added, so within a year it would describe a forge that no longer exists.

Before you decide

Agree the work. Know how to judge it.

Website for forging companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from metal forging companies. Anything missing is noted in the written scope, with who will supply it.

Domain and hosting logins
The owner needs the domain and hosting logins so the site can move or be edited. A relative or a former vendor may hold them. Without the logins, the new site cannot take over the old address, and we plan the pages while access is recovered. Include the registrar account too, since an expired domain takes the site down.
Equipment list and certificates
Current, legible, approved by the quality head. Include inspection facilities and the instruments you own, but only where you will stand behind them. If a figure is uncertain, it stays off the page until the quality head confirms it.
Parts with permission to show
Photographs of parts you may display, with the customer's agreement to show them without a name. Without permission, the gallery shows dies, billets, presses and inspection benches instead, which still tell an engineer what the forge can do. Please include a clear picture of each die set.
A decision on customer names
Whether any customer may be named. Without a yes, none appear. If a customer wants to be named, ask for a written yes so the site is covered if the contract changes. Where permission is withheld, the page describes the sector and the part type only, which is enough for an engineer to judge the fit.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Write the first screen with the production head

    The first screen must tell a buyer what you forge, the weight range, the grades and how to send a drawing. We draft it with your production head. You approve the wording, because a first screen that overstates the weight range brings drawings you will refuse. We keep the page free of adjectives, and the production head checks every number against the press ratings. It also names the one thing a visitor should do next, which is to send a drawing.

  2. 2

    Collect equipment, grades and certificates

    Presses, hammers, ring mills, grades and tests, with certificates attached. The quality head checks every line. Where the same grade is available in several forms, such as bar, billet or ring, the page says which you forge. We ask the quality head to date each certificate so the page shows when it was last checked.

  3. 3

    Plan the photographs

    A plan for the dark floor: lit parts on a bench, dies in the store, inspection. We shoot with the supervisor. Parts are lit from the side, shot on a plain bench, and each photograph carries a caption with part, grade and weight.

  4. 4

    Build the drawing upload

    A form that takes large files and asks the four questions. We test it with a real drawing from a phone. The form asks for the four items an estimator needs and accepts a link for files that are too large to send.

  5. 5

    Launch and compare enquiries

    On release we test forms and phone links, then compare drawings with the earlier count. You receive every login. We also check how the pages load on a mobile connection from the estate, since that is where a buyer may open them. Forms, phone links and map pins are tested from outside the forge, and any failure is corrected before the owner is told the site is live.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What should the first screen say?
What you forge, the weight range, the grades and how to send a drawing. A buyer should know in one look whether the forge suits the part. Slogans can sit lower on the page.
Should we show customer names?
Only with each customer's written permission. Buyers keep their vendor lists confidential. Show the sectors you serve and the parts you forge, and add a name when the buyer has approved it.
Should we replace the old site or repair it?
That depends on what exists. If the structure is sound, we add product pages and the certificate page. If it blocks drawings or fails on phones, a rebuild is the cleaner way. We look first, then advise.
A forge floor is dark and dirty. Can we still photograph it well?
Yes. A phone in good light on the finished part, the sectioned cut and the inspection bench is enough. Avoid the furnace glare and shoot parts clean on a plain surface. Buyers want to see the part and the testing, not a dramatic floor.
Do forging buyers need a long site?
No. A buyer needs the equipment, grades, certificates and a way to send a drawing. We build the pages that answer these, and add more when a new question appears. Where a visitor needs more, a link leads to the equipment or certificate page.
How does the site handle a large drawing?
The form accepts files up to a limit set with the host, and shows a clear message if the file is too large, asking for a link or a WhatsApp send. We test with a large file before launch. You get a test report of the upload from a phone before the site goes live. We also confirm that the confirmation message the buyer sees names the estimator who will read it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.