Skip to content
GullySales

PCB manufacturers · CRM

Keep every Gerber, quote and repeat order in one record the whole team can read.

A CRM for a PCB fab holds each customer, each RFQ and each quote so that nothing sits in a personal inbox. GullySales sets up a pipeline that fits your quoting steps and trains the team to keep it current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For PCB manufacturers

Where it usually goes wrong, and what we would do.

  • “Quotes live in inboxes and memories”

    When an RFQ comes in by email and the quote goes out from a personal mailbox, nobody else can see its state. If the sales person is away, the buyer waits and the team cannot tell what was promised.

  • “A board type belongs on the record”

    A customer who orders multilayer boards today and metal-core boards next quarter needs a record that shows both. Without it, each order starts from guesses.

  • “Repeat orders hide a pricing history”

    An OEM that reorders the same board uses the last price as a benchmark. A record of past quotes, quantities and revisions lets the team respond with facts.

  • “Documents belong with the customer”

    Test reports, certificates and approvals asked for by a customer should be reachable from that customer's record, so an audit request does not turn into a search.

What we do

What we deliver for PCB manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Pipeline stages for RFQ to repeat order

    Stages such as file received, CAM review, quote sent, sample, first order and repeat, named in your own words.

    Result: Every opportunity shows its stage.

  2. Customer and board records

    Fields for contact role, board family, layer type, finish and typical quantity.

    Result: You can search customers by what they buy.

  3. Quote log

    A record of each quote with its revision, price basis and outcome.

    Result: Pricing history is available when a repeat buyer asks.

  4. Document links

    Links from each customer record to the certificates and reports sent to them.

    Result: An audit request is answered from one place.

  5. Team habits and training

    Short guidance on who updates the record and when, written with your sales and CAM staff.

    Result: The record stays in use after setup.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the fields that tie a Gerber set to a quote and a repeat order.

One customer sends repeat boards and a price history. The record follows the board and the buyer.

Board type and layer count
Entered by the CAM engineer from the file. Shows which boards the fab is asked for and which it wins.
Quote number and revision
Set by sales when the quote goes out. Keeps a revised file from being treated as a new customer.
Quoted price and result
Added when the order is won or lost, with the reason the buyer gave. Builds the pricing history.
Documents on file
Links to test reports and material certificates for the customer, filled by the quality team.
Last order and next expected
Updated at each shipment. Drives the repeat-order reminder for a buyer who orders on a pattern.
Customer type and source
Chosen at logging: OEM, EMS, startup or marketplace. Shows which source brings repeat boards.

Who it is for

This is written for these PCB manufacturers.

  • Single-sided and double-sided board makers for consumer and appliance electronics
  • Multilayer and HDI board fabs for industrial and telecom electronics
  • Aluminium and metal-core board makers for LED lighting and power electronics
  • Flexible and rigid-flex circuit makers
  • Quick-turn prototype fabs serving startups and R&D labs
  • High-volume fabs working for automotive and EV electronics
  • Fabs supplying defence, aerospace and medical device electronics
  • Captive board shops inside larger electronics groups opening to outside work

Before you decide

When this may not be the right fit.

  • The CAM team will not update a record because quoting is done in the ERP, and nobody has agreed which system leads.
  • The fab has few customers and the owner already knows each board and its price.
  • You want the CRM to hold production schedules, when the ERP does that already.

Before you decide

Agree the work. Know how to judge it.

CRM for PCB manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from PCB manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quote log as a spreadsheet
Whatever your team uses to track quotes, in any format. We load it into the CRM as history. If it is spread across personal files, one person must gather it first, or the pricing history of repeat customers will be missing from the start.
A list of who handles which customers
Account ownership, by name, for each active customer. The CRM needs an owner on every record. Where two people claim one account, the owner decides. Without this, follow-up reminders go to the wrong person.
Decision on who sees prices
Which roles may see quoted prices and costs in the CRM. Some fabs keep costing with the owner. We set permissions to match. If undecided, we hide prices from everyone but the owner, which is safe but slows sales until the owner is free to answer each quote. A senior salesperson can be given a limit if you want; say so and we configure it.
Email and WhatsApp numbers used for business
The mailboxes and business numbers that enquiries arrive on, so that they can be connected or checked. Personal numbers in use for RFQs are a risk we point out. Missing, part of the pipeline will still live outside it.
One CAM contact to keep board details
A person who will add stack-up and finish details to the board record when a file is checked. Without them the board record stays empty and the CRM is only a contact list.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one RFQ from inbox to order

    We pick a recent order and follow it through mail, WhatsApp, the quote file and the sales diary with your sales head. Every place where the record is kept, and every place it is lost, goes on one sheet, including the personal spreadsheets and phone notes that nobody mentioned until asked. The sheet shows the owner how much of the pipeline cannot currently be seen without asking a person. You decide the stages of the pipeline from that trace.

  2. 2

    Name the stages in your quoting words

    Together with sales and CAM we name the stages as your shop talks about them: file received, file checked, quote sent, sample lot, production order, repeat. Each stage gets a rule for what must be known before a card moves. You approve the list before any card is created, and the CAM team confirms that the stage names match how a file is checked.

  3. 3

    Set up customer and board records

    We build the records so that a customer holds its boards, with layer count, finish and quantity per board. Past quotes are loaded from your quote log. You choose which old customers are imported and which are left out. Board fields follow what your CAM team already checks, so the same words appear on the record and in the file review, and a new salesperson reads a board the way the engineers do.

  4. 4

    Move a dozen live RFQs in as a test

    Your sales people enter real open RFQs in the new pipeline, and we watch what confuses them. Fields that nobody fills are removed. The CAM team is shown only the part that touches them.

  5. 5

    Train the team on their own enquiries

    We run short sessions where each person updates their own deals and links the quote document. The owner learns to read the pipeline view. We agree a habit, such as logging the RFQ on receipt, which you accept before the old tracker is closed. We also set who may edit a quote after it has been sent, so the price the buyer received is never overwritten by a later change.

  6. 6

    Compare the pipeline with the old quote log

    After the switch we compare quotes sent, orders won and repeat orders in the CRM with the figures recorded before. You see whether the pipeline holds the same facts as the log and where the team still keeps notes elsewhere. Anything found outside the CRM goes to the owner as a short list, with a name against each item, so the gap is closed by a person and not left to fade.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should a PCB fab use?
One that your team will open daily. Several tools used in India suit a small sales team. We choose with you based on cost, ease and the fields you need, then set it up.
Do we need to connect the CRM to our ERP?
Not at the start. Begin with the pipeline and customer records. A link to the ERP can come later if the team finds a repeated manual step worth removing.
What if the CAM team will not update it?
Keep the CAM entry to one field, such as the review outcome. A long form will be skipped. We design the record around the few facts only CAM can add.
Do we need to connect the CRM to our ERP?
Not at first. The CRM holds the sales side: quotes, buyers and reorder dates. Connect it to the ERP later if double entry becomes a burden. Start by agreeing which system holds which fact, so nobody maintains the same price in two places.
Can the CRM hold the Gerber files themselves?
It can link to them, and we recommend a link rather than the file. Gerbers are large and belong where your CAM team already stores them. The CRM record holds the link, the board summary and the quote, so anyone opening the customer sees the history without moving the files.
What happens to the quote history in people's inboxes?
We load the quote log first and then ask each salesperson to forward or note the open RFQs that matter. Old closed threads are not rebuilt line by line. You decide how far back to go, and the old inboxes stay as they are for reference.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.