Skip to content
GullySales

PCB manufacturers · Digital marketing

Plan search, content, marketplaces and outreach around the boards your fab builds best.

Digital marketing for a PCB fab means choosing the online channels that reach engineers and sourcing people, and measuring them by RFQs and orders. GullySales plans the mix with you and ties each channel to the lead register.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What digital marketing means

Digital marketing is the combined work of search, social media, advertising and website channels running together rather than as separate projects with separate people. GullySales runs these as one connected system so a change in one channel, such as a new offer, is reflected everywhere at once.

Last updated 14 Nov 2026.

For PCB manufacturers

Where it usually goes wrong, and what we would do.

  • “The channels are plentiful and the budget is small”

    A fab can spend on a marketplace, search ads, LinkedIn and trade directories at once and learn nothing from any. Choosing a few channels and measuring each gives a clearer view.

  • “Click counts do not show board quality”

    A campaign can bring visits from students and hobbyists. The measure that matters is how many RFQs for real production boards arrive and how many become orders.

  • “The website is the base for every channel”

    Whatever channel brings a visitor, the visitor lands on the site. If the capability pages are thin, spend on any channel is wasted.

  • “Digital work and sales follow-up must meet”

    A lead that arrives through a channel and waits for a reply is no better than no lead. The marketing plan has to include who replies and how.

What we do

What we deliver for PCB manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Channel plan

    A choice of channels for your buyer types, with a reason for each and a note on what each will not do.

    Result: You know where effort goes and why.

  2. Measurement sheet

    A simple table of source, enquiry, quote and order, filled from your records.

    Result: You can compare channels by orders.

  3. Campaign briefs

    Written briefs for any paid or outreach campaign, stating the board type, the buyer and the offer.

    Result: Each campaign has a clear target.

  4. Marketplace and directory review

    A review of which listings bring useful RFQs and which bring noise.

    Result: Renewal decisions rest on your own data.

  5. Hand-off rules to sales

    A rule for who receives each lead and how it is acknowledged.

    Result: Leads reach a named person.

How the result is measured

  • Enquiries across channels
  • Cost per enquiry overall
  • Channel mix by contribution

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Match each channel to a search an engineer runs for a board.

The fab has a small budget and a crowd of channels. Each row ties a search to the page or action that should answer it.

PCB prototype manufacturer small quantity
A prototype page with a short RFQ form and a narrow paid-search campaign to the districts and users you want.
multilayer PCB fabrication with impedance control
The multilayer page and a LinkedIn post by the process engineer, aimed at design engineers at industrial firms.
metal core PCB supplier for LED lighting
The metal-core page and outreach to LED makers, with the thermal material options in plain text.
PCB manufacturer listing on marketplaces
A sorted marketplace profile that routes OEM and EMS RFQs to the CAM team and screens student requests.
how to send Gerber files for a quote
The Gerber preparation checklist, linked from every capability page and every reply.

Who it is for

This is written for these PCB manufacturers.

  • Single-sided and double-sided board makers for consumer and appliance electronics
  • Multilayer and HDI board fabs for industrial and telecom electronics
  • Aluminium and metal-core board makers for LED lighting and power electronics
  • Flexible and rigid-flex circuit makers
  • Quick-turn prototype fabs serving startups and R&D labs
  • High-volume fabs working for automotive and EV electronics
  • Fabs supplying defence, aerospace and medical device electronics
  • Captive board shops inside larger electronics groups opening to outside work

Before you decide

When this may not be the right fit.

  • The CAM engineer cannot review more files than arrive now, so extra channels would add waiting.
  • You have no capability pages or RFQ form, and paid search would send clicks to a page that cannot take files.
  • You have not decided which boards to grow, and the channels would attract the wrong mix.

Before you decide

Agree the work. Know how to judge it.

Digital marketing for PCB manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring a recent won order and an enquiry that went nowhere. Trace how each buyer found you, what they asked, and who handled the next step. A channel list alone will not explain the difference.

Make the scope clear

Choose one offer and one buyer group first. Agree which part needs attention: being found, getting a useful enquiry, or turning an enquiry into an order. Separate recommendations from the work required to carry them out.

Check the work in use

A useful plan names the first change, its owner, the evidence behind it, and the number that will show whether it worked. Ask what has deliberately been left out and why.

Know when to change course

If your team cannot answer the enquiries it already receives, improve that handover before buying more traffic. If the offer itself is unclear, test it with buyers before adding channels.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from PCB manufacturers. Anything missing is noted in the written scope, with who will supply it.

The spend on listings and ads so far
What you pay for marketplace plans, directories and any ads, taken from invoices. This shows what you already buy. If spend is unknown, we start by collecting the invoices, since a plan built without it will repeat old mistakes.
Admin access to every account in use
Logins for the website, search tools, ad accounts and listings, held in the company's name. Accounts owned by an outside person are the usual block. Without access we cannot read the data or change a thing.
A sales person who logs every enquiry
A person who writes down each RFQ and its source. The comparison of channels depends on it. If sources are not recorded, we cannot tell channels apart and the plan relies on guesses. Even a column in a shared sheet with the date, source and board type is enough to begin with, and the sales person can add it as each enquiry arrives.
A fixed answer on what you will not build
The board types and volumes you decline. Campaigns that attract them waste quotes. If this is undecided, ads may bring the wrong buyers, and each wrong enquiry costs your CAM engineer an hour reading a file you will not quote. The list also tells us which search terms to exclude.
A budget ceiling approved by the owner
A number the owner is willing to spend before results are known, decided in advance. Without it each channel waits for approval, and tests never finish. State also who may approve a small change mid-test, so a wrong headline can be fixed on the same day.

How it works

How the digital marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Look at where the last RFQs came from

    We go through the RFQ folder and ask your sales head how each buyer found you: search, marketplace, referral, exhibition, LinkedIn. That tells us where the money has already come from. You tell us the spend range you are willing to consider, if any.

  2. 2

    Check the site, listings and tracking

    We review the website, the marketplace and directory entries and the tracking in place. Missing form tracking is noted. You give access, and we fix the measurement before we plan spending. We also check that the marketplace and directory entries state the same capability as the site, because an engineer who compares them and finds a difference trusts neither.

  3. 3

    Pick two or three channels, not ten

    With your sales head we choose the few channels that suit a fab with a small budget: for example search, a marketplace listing and LinkedIn. Each gets an owner and a purpose. You approve the choice and the reasons. We write down what each channel is not for, so that a LinkedIn page is not judged by RFQs it was never meant to bring and a marketplace plan is not judged by brand awareness.

  4. 4

    Brief each campaign against a board type

    For each channel we write a brief tied to one board type, one buyer and one action, such as sending files through the RFQ form. A CAM engineer confirms the claims. Nothing goes live before you read it. Each brief also names the page the visitor lands on, so a campaign about aluminium boards leads to the aluminium page and not to a home page where the visitor must search again.

  5. 5

    Run a test and check the hand-off

    We launch a small test of each channel and follow the first enquiries to your sales person. We check that each lead is tagged with its source in the register and that the reply goes out the same day. If a source arrives untagged, we trace why before more spend is committed, since an untagged lead cannot be credited to anything.

  6. 6

    Reconcile channels with orders and quotes

    We match each channel's enquiries with quotes and orders, using the register. You see which channel brought buildable RFQs and which only brought clicks, compared with the baseline recorded first, and you decide where to keep spending. We also show the owner the channels that brought buildable RFQs but no orders, because those point to a quoting problem and not a marketing one.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How much should a fab spend on digital marketing?
That is for you to decide against your capacity and margins. We help set a modest start, measure what comes back and adjust. We give no spend figure because it depends on your plant.
Are paid ads worth it for a PCB fab?
They can be when a specific board type has spare capacity and the search terms are clear. We test a small, defined campaign first and read the results against orders.
Can digital marketing reach OEM sourcing heads?
In part. Outreach and LinkedIn can reach them, but approval follows the OEM's own process. We prepare the pack and track the outreach.
Can digital marketing reach OEM sourcing heads?
Yes, but not through general advertising. Sourcing heads respond to documents, audit readiness and an introduction from an assembler. Use LinkedIn and a documents page, and ask existing EMS customers to introduce you. Record each introduction so you can see which route brought the vendor approval.
Should we advertise to OEM sourcing heads directly?
Sourcing heads rarely respond to advertisements; they respond to a referral, a sample lot or a clear capability page. We would put effort into pages and LinkedIn and use ads for engineers searching for a specific board. You can test it with a small budget and read the register before deciding. Whatever you choose, keep a sample lot or a visit offer ready, because a sourcing head who responds will ask for one.
Who manages the ad accounts?
The accounts are opened in your company's name and you keep ownership. We manage the campaigns on your instruction and show you the numbers. If you end our work, the accounts and their history stay with you, which is why we do not run campaigns in an account we own.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.