Skip to content
GullySales

PCB manufacturers · Follow up systems

Follow up each quote and each prototype buyer until the order is won or closed.

A follow-up system for a PCB fab is the set of rules that decides who contacts a buyer after a quote, a sample or a prototype order, and what is said. GullySales writes the steps, the messages and the reminders so no RFQ is left to memory.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For PCB manufacturers

Where it usually goes wrong, and what we would do.

  • “A price sent and never chased is only a hopeful guess”

    The buyer received a price, compared it with others and moved on. Nobody asked whether the stack-up question was clear or whether the delivery date suited. The quote simply expired in the inbox.

  • “The prototype buyer is the future production buyer”

    A startup that received ten sample boards needs a contact after they are tested. A call asking how the boards performed opens the production conversation naturally.

  • “Repeat customers need a reminder, not a pitch”

    An OEM that orders a board at intervals will reorder from whoever reminds them at the right moment. A note when the previous lot would be near its end is useful, not pushy.

  • “Lost quotes carry information”

    When a buyer picks another fab, the reason is worth recording. It may be price, date or a spec the fab could not meet, and the pattern guides the next quote.

What we do

What we deliver for PCB manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up steps by situation

    Written steps for after a quote, after a sample, after a prototype lot and after a lost quote.

    Result: The team knows the next contact for every case.

  2. Message templates

    Short messages for each step, written in plain language and editable by the sender.

    Result: Follow-ups go out in a consistent voice.

  3. Reminder rules in the CRM

    Reminders tied to quote status, assigned to a named person.

    Result: Overdue follow-ups show up in a list.

  4. Lost-quote reasons list

    A short list of reasons to choose from when a quote is closed.

    Result: You can see why quotes are lost.

  5. Repeat-order prompts

    A list of customers with a known reorder pattern, with a prompt for the sales person.

    Result: Repeat buyers are contacted before they go elsewhere.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Send a note at each stage from RFQ to repeat order.

Each moment below has a message and a line to record. Timing follows the buyer's design cycle, not a fixed gap.

Quote sent
A message confirming layers, material, finish and quantity quoted, with the name of the CAM contact for questions.
CAM query raised
A message that lists what is missing from the file. The buyer's reply and the revised file are logged against the quote.
Prototype shipped
A note asking the engineer to test the boards and report anything found, logged in the complaint record.
Production lot prompt
A message to the prototype buyer when the design looks ready for volume, asking about quantity and revision.
Repeat order prompt
A note to a pattern buyer before the likely reorder, referring to the last board. Owned by the account manager.
Lost quote
A courteous note that records the reason and any rival price the buyer shares.

Who it is for

This is written for these PCB manufacturers.

  • Single-sided and double-sided board makers for consumer and appliance electronics
  • Multilayer and HDI board fabs for industrial and telecom electronics
  • Aluminium and metal-core board makers for LED lighting and power electronics
  • Flexible and rigid-flex circuit makers
  • Quick-turn prototype fabs serving startups and R&D labs
  • High-volume fabs working for automotive and EV electronics
  • Fabs supplying defence, aerospace and medical device electronics
  • Captive board shops inside larger electronics groups opening to outside work

Before you decide

When this may not be the right fit.

  • CAM and sales each assume the other owns the quote, so follow-up would be written and not sent.
  • You do not record why quotes are lost, and a follow-up would repeat the same offer.
  • You promise delivery dates in follow-ups, when material supply decides the date.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for PCB manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from PCB manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quote log with dates and outcomes
Each quote with its date, the buyer and what happened. The follow-up rules depend on knowing how long buyers took to answer in the past. If outcomes are not recorded, the first stage of the work is filling them, with sales memory.
A list of recent sample and prototype jobs
Jobs shipped as samples or prototypes, with the buyer and the date. These buyers are the likeliest future production customers. Without the list we cannot write a prototype follow-up, and these buyers receive nothing.
A decision on the tone you want
Whether the owner wants a formal reply, a friendly note or something short on chat. Engineers dislike pushy messages. Without a decision, we write plain and brief and your team adjusts. Tell us if a particular buyer, such as an EMS purchase head, expects a certain style, since the template should suit the reader and not only the sender.
A named owner for each situation
One person for quote chasing, one for sample feedback and one for repeat reminders. A reminder with no owner is ignored. If the team is small, one person may hold all three, and we say so.
Access to the CRM or a tracking sheet
Edit rights to wherever reminders will live. If you have no CRM, a shared sheet is acceptable for a start. Without a tool, rules exist on paper only and fade within a few weeks. The owner should also decide who reviews the task list for overdue items, since a list nobody reads gives the same result as no list.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the quotes sent but never answered

    We take the quote log and list quotes that got no reply, with your sales head. For each we note what was sent, to whom and what happened next. This shows where buyers go quiet. You tell us which of these buyers you still want. We also mark quotes where the board could not be built, since chasing those buyers would repeat a quote that should never have been sent.

  2. 2

    Decide who chases and who explains

    With sales and CAM we decide who contacts a buyer after a quote, a sample and a prototype, and who answers a technical doubt. Written down, the split ends arguments over ownership. You sign off the rule before any message is written, and it is pinned where the team will see it.

  3. 3

    Write the message for each situation

    We draft the wording for a quote with no reply, a sample lot sent, a prototype delivered and a repeat order due. Each message asks one question and avoids pressure. Your sales people change it into their own voice before it is saved. The prototype message is written for an engineer who has just received boards, so it asks how the boards assembled, not whether they want to order more.

  4. 4

    Set reminders in the CRM and test them

    We create the tasks that appear against a quote or an order and run a few real ones through. A reminder that fires on a closed deal is fixed. The sales team tell us if the task list is too long to use. The CAM team gets reminders only for quotes that wait on a technical answer from them, so they are not buried in sales tasks.

  5. 5

    Add the reasons a quote was lost

    We give the team a short list of reasons to pick when a quote closes lost: price, delivery, a rival, no reply, board not buildable. You review the list so the choices match what really happens. We ask the team to avoid a catch-all such as other, because that choice teaches the owner nothing about why quotes fail, and we let the owner add a reason when a new pattern appears.

  6. 6

    Look at replies and repeat orders after launch

    We compare the replies received, samples converted and repeat orders with the quote-log figures taken first. You see which message got answers and which reason for loss appears more than any other. The wording and rules are adjusted on that evidence.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What is the right moment to chase a board quote?
That depends on the buyer and the board. We set the steps with your sales head, using what your past quotes show. We avoid fixed promises because buyers differ.
Will repeated follow-ups annoy engineers?
Not if each message adds something, such as an answer to a query or a note on a delivery option. Empty reminders annoy. We write each step to carry a useful point.
Who owns the follow-up, sales or CAM?
Sales owns the contact, and CAM supplies the technical answer when asked. We write that split into the steps so a technical question does not stall the conversation.
Who owns follow-up, sales or CAM?
Sales owns the contact and the message; CAM answers the technical query. A buyer who hears from one person stays clearer on the status. Name one owner per quote in the record, and let CAM add its notes there so sales sends an informed message.
Can follow-ups be automatic?
Reminders can be automatic; messages to buyers are better sent by a person. We set the CRM to prompt your sales person with the right template, and the person reads and sends it. Fully automatic chasing of engineers annoys them, and your replies are also a chance to answer a technical doubt.
How is a buyer's request to stop contact handled?
Then the record is marked and no reminder is created for that buyer. We build a stop flag into the CRM and agree that your team respects it at once. The same applies to buyers who say they will come back when they have a board; the note records the date they gave. Your team should still confirm the preference in writing, so a later salesperson who inherits the account does not contact the buyer by mistake.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.