Skip to content
GullySales

PCB manufacturers · Website

Build a site that states your capability in text and takes the Gerber files properly.

A website for a PCB fab is the place an engineer checks capability before sending files, so it must state what the factory builds and how to ask for a quote. GullySales designs and builds the pages, the RFQ form and the document area.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For PCB manufacturers

Where it usually goes wrong, and what we would do.

  • “A single page about PCBs hides your range”

    If the site says only that the company makes printed circuit boards, an engineer cannot tell whether the fab handles multilayer, metal-core or flexible work. The visitor leaves or sends a simple request.

  • “The RFQ form decides the quality of enquiries”

    A plain contact form brings vague messages. A form asking for layers, material, finish, quantity and a file upload brings enquiries your CAM engineer can start on.

  • “Certificates and process pictures build trust”

    A buyer verifying a new fab looks for certifications, equipment and inspection steps. Showing these with confirmed facts answers questions before the first call.

  • “A slow or broken site on a phone loses the visit”

    Engineers and buyers open links on a phone between meetings. A page that loads badly or hides the form on a small screen loses the visitor before the first look.

What we do

What we deliver for PCB manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Capability page structure

    A page for each board family with layers, materials, finishes and limits, each value confirmed by the factory.

    Result: Engineers can check a limit without calling.

  2. RFQ form and file upload

    A form with the questions CAM needs and a safe way to send Gerbers.

    Result: Enquiries arrive ready to review.

  3. Quality and certification area

    A page for approvals, equipment and inspection steps, using only what the fab holds.

    Result: A buyer can verify the basics.

  4. Mobile and speed check

    A review of how pages work on a phone and how long they take to open.

    Result: The site works where buyers read it.

  5. Analytics and form tracking

    Tracking set up so each RFQ is traced to the page that produced it.

    Result: You can see which pages bring enquiries.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Build the pages an engineer checks before sending the Gerber set.

A visitor reads for specifics. Each row is a search or a worry and the page that meets it.

PCB manufacturing capability layers material finish
A capability page in text, set out by board type, with layer range, materials, finishes and tolerances the fab holds.
send Gerber for PCB quote
The RFQ form with file upload and the stack-up fields, placed on every capability page.
PCB manufacturer quality certification test reports
A quality area with the certifications the fab holds, test methods and a sample test report, with no customer named.
PCB factory process photographs
A process page with images of the lines, so an engineer can see the equipment before arranging a visit.
PCB manufacturer for defence and medical electronics
A sectors page that states the standards and records the fab keeps, without any claim of approval.

Who it is for

This is written for these PCB manufacturers.

  • Single-sided and double-sided board makers for consumer and appliance electronics
  • Multilayer and HDI board fabs for industrial and telecom electronics
  • Aluminium and metal-core board makers for LED lighting and power electronics
  • Flexible and rigid-flex circuit makers
  • Quick-turn prototype fabs serving startups and R&D labs
  • High-volume fabs working for automotive and EV electronics
  • Fabs supplying defence, aerospace and medical device electronics
  • Captive board shops inside larger electronics groups opening to outside work

Before you decide

When this may not be the right fit.

  • The fab's capability is not yet written by anyone who runs the lines, so pages would be guesses.
  • You hold no certification you can show, and a quality page would be empty.
  • The present site already converts and the delay is in the quote, which a new site would not fix.

Before you decide

Agree the work. Know how to judge it.

Website for PCB manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from PCB manufacturers. Anything missing is noted in the written scope, with who will supply it.

Domain and hosting login
Control of the domain name and the hosting account, held in the company's name. A former vendor holds them in some cases. Without these we cannot launch, and a move can take effort that we want to start early.
Current certificates and test report samples
Copies of the quality certificates the company holds and a sample test report with customer details removed. Expired certificates are not displayed. If they are missing, the quality area is left blank until they arrive, and we do not display a certificate that has lapsed. Check each expiry date before handing copies over.
The capability sheet reviewed by the process head
A sheet that states what the factory can build, confirmed by the person who runs the lines. The pages are built from it. A sheet that is out of date makes the site promise too much, and the first engineer to compare it with your quote finds the gap. Mark any line you are unsure of, and the pages will carry only the confirmed limits.
Photographs of the plant and sample boards
Clear images of the lines, inspection and sample boards, with no customer designs. Phone images will do if they are sharp. Without them we use diagrams, and the pages look thin. Ask the shift supervisor to take them while the lines are running, since a clean idle line looks less like a working fab.
A sales person to receive form enquiries
A named person whose phone or inbox gets each RFQ and who replies the same day. The form test needs them. Without one, the best-built form still loses buyers. The same person should know who covers when they are travelling, so a form sent on a Friday evening is read by someone.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the board types the site must show

    We start from the capability sheet and ask your sales head which board types bring the best orders. Each type gets its own page in the site plan. You decide which are shown and which are left for a later phase. We also list the buyers who will read the page, an engineer checking minimum track and a purchase executive looking for a certificate, so the headings answer both.

  2. 2

    Collect certificates and process photographs

    Your quality head hands over the certificates, test report samples and the photographs of the lines. We check that each certificate is current and that no customer board is visible. Missing items are listed with an owner. Where a certificate belongs to a plant that does not make the boards a page describes, we say so, because the page must not suggest it covers more than it does.

  3. 3

    Agree the RFQ form field by field

    With a CAM engineer we choose which questions the form asks and which files it accepts. A long form loses prototype buyers; a short one brings unusable enquiries. You pick the balance after we show you both.

  4. 4

    Review the site map and sample pages

    We show the structure and one finished board page for your comment. Your engineer corrects the figures. You approve the layout before we build the rest. The CAM engineer also tells us which table columns an engineer would copy into a spreadsheet, and those stay as text, not as a picture.

  5. 5

    Test the site on phones and slow lines

    We build on a test address and try each page on a phone and a slow connection, upload a sample file through the form and check that the enquiry reaches your sales person. Anything that fails is fixed before launch.

  6. 6

    Launch and watch the form for a first RFQ

    After your approval the site goes live and we confirm tracking. We then compare enquiries received through the form against the figures recorded before the new site, and you decide what to change. We also test the form from outside your office network and from a mobile connection, since a form that works only on your own line is not tested.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is the current site worth repairing, or should a PCB maker start over?
It depends on the structure and the platform. If the pages can hold text capability and a proper form, we improve what exists. If not, a rebuild is cleaner.
Should the site show prices?
Showing a price does little for a made-to-file product, since the price depends on the Gerbers. Show process, capability and how to ask for a quote. We help decide what to show.
Who supplies the technical content?
Your CAM and quality teams confirm the facts, and we write them into clear pages. Nothing goes live until your engineers have checked the numbers.
Who supplies the technical content for the site?
The CAM and process engineers supply the facts, and a writer shapes them. An engineer who runs the line knows the real limits on layers, tolerances and finishes, and a writer cannot guess them. Each page is read by the engineer who supplied it before it goes live.
Can the site keep our old address and pages?
Yes. We list the pages that engineers already find and keep their addresses, or redirect them to the new pages, so that no search visitor lands on an error. You decide which old pages are dropped. We test the redirects before launch so existing rankings are not thrown away. A page that has brought files for years should not disappear because the new site has another structure.
Do we need to show a price on the site?
No. A fab's price depends on the file, so fabs' sites ask for an RFQ instead. We can show what affects price, such as layers, finish and quantity, so an engineer knows what to send. Whether to publish any indicative figure is your decision, and we do not add one without it.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.