Rubber moulding companies · Website
Build a website that a purchase engineer can trust with a drawing.
A website for a rubber moulder is a set of part, process and capability pages with a way to send a drawing. GullySales works on page structure, wording, photographs and the form, so the site reads as the home of a moulder who can be trusted with a tool.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Last updated 14 Nov 2026.
For rubber moulding companies
Where it usually goes wrong, and what we would do.
“The site is checked before the quote is acted on”
A purchase engineer who receives a reply opens the website to see who sent it. Presses, materials, tool room, lab and certificates should be visible on the first screens, or the buyer leaves with a doubt that the price cannot remove.
“Photographs carry the proof”
A clear photo of a press, a tool on the bench or a batch of finished bushes tells the buyer more than a paragraph. Stock images of generic rubber items tell the buyer the shop has nothing of its own to show.
“The drawing form is the main button”
The most useful thing a visitor can do is send a drawing. A form with file upload, material, hardness, yearly volume and tool ownership fields, placed on every part page, turns the visit into a quote request.
“Technical pages should read as if an engineer wrote them”
Pages that name materials, tolerance limits, flash control and testing in specific words show a shop that moulds, not one that resells. Vague lines about quality and experience read as filler to a buyer who works from drawings.
What we do
What we deliver for rubber moulding companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A site structure
Home, capability, part families, processes, materials, quality, tool room and contact pages mapped before any writing.
Result: Every page has a job and a place in the menu.
Part and process pages
Separate pages for bushes, bellows, diaphragms, bonded parts and silicone work.
Result: A buyer reaches the page for their part from the menu.
A drawing upload form
A form that accepts drawings and sends them to a named person on your team.
Result: A submitted drawing arrives with the buyer's details.
A capability and quality page
Machine list, lab tests, certificates held and inspection steps, written in plain technical terms.
Result: A buyer can check capability before asking.
A photograph brief
A shot list for the presses, tool room, lab and finished parts, with notes on keeping customer parts out of frame.
Result: Your team can photograph the floor without exposing confidential parts.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches your buyers type
Give each search an engineer types a page on your site that answers it.
- rubber moulding company near me
- A contact page with the factory address, the industrial area and a note on visits by appointment. Pair it with a map profile for the plant.
- how to send a drawing to a rubber moulder
- A page explaining the formats you accept and what the drawing must show, ending in the upload form. It stops incomplete drawings arriving.
- rubber bellows manufacturer
- A part page with the sizes, the compounds and a photograph of a finished bellows. Say which parts need a drawing before any quote.
- silicone moulding for appliance parts
- A page on the silicone grades you mould and the finish you hold, naming only the documents you can supply.
- rubber moulder quality checks
- A quality page listing the inspection steps and the instruments in your lab, with a sample report format a buyer can view.
Who it is for
This is written for these rubber moulding companies.
- Compression moulders making bushes, mounts and sealing parts for auto suppliers
- Injection rubber moulders for small precision parts with several cavities
- Transfer moulders for rubber-to-metal bonded components
- Silicone and EPDM moulders serving appliance and kitchen-ware makers
- Moulders making diaphragms, bellows and boots for pumps and valves
- Railway and metro vendors needing anti-vibration and buffer parts
- Shops that also run their own tool room for mould making and repair
- Job-work moulders running customer-owned tools
Before you decide
When this may not be the right fit.
- You have no photographs of your presses, moulds or parts, and the site would show stock images that engineers see through
- The owner has not agreed what the site may say about tool ownership, so the form and the terms would contradict each other
Before you decide
Agree the work. Know how to judge it.
Website for rubber moulders: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from rubber moulding companies. Anything missing is noted in the written scope, with who will supply it.
- Domain and hosting logins
- Please tell us who owns the domain and which host runs the site. Without logins, the new site cannot go live. If an old vendor holds the domain, recovering it comes first. Also tell us whether email runs on the same domain, so the change of hosting does not interrupt mail.
- The press list and standards you work to
- Capability pages rest on facts. Provide a short list from production and quality. If incomplete, we leave out what is not confirmed. Include the largest part you can mould and the tightest tolerance your measuring equipment can verify.
- Photographs of parts and the shop
- Clear photographs of finished parts on a plain surface, and of the floor with customer marks covered. A phone camera is enough. Without them, pages carry diagrams and the site looks thinner. Place a ruler or gauge beside the part where possible, so the size is visible to the buyer.
- Current certificates as scans
- The quality page shows certificates a buyer recognises. Give clean scans with validity dates. A certificate that is pending is not placed on the page, and the layout keeps a space for it.
- A tester and approver for the pages
- Someone must try the drawing form, read each page and give approval. Name them. Without a named person, launch waits.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Open your site as a purchase engineer
We read the site on a phone and a laptop and ask the questions a buyer asks: which parts, what compound, what size, how do I send a drawing. You watch and correct anything you know is wrong. We write down what the site fails to answer. We also screenshot each page, so the new design can be compared with the old at the final review.
- 2
Collect the press list and quality records
The production head gives the list of presses, platens and moulding methods. The quality head gives the measuring equipment and the standards followed. We write capability pages from these, and both heads read them before design starts. Anything either head will not stand behind is left off, even if a competitor states it.
- 3
Plan the pages around part families
We sketch the sitemap with a page for each part family, the processes, a capability and quality page and a contact page with the drawing form. You approve the sketch. Anything not on the sketch is left out so the site stays easy to read. The sketch is drawn on paper first, so changes cost nothing, and only then moved into the site.
- 4
Brief the photographs with the tool room
With the tool room head we list the photographs: finished parts on a plain surface, a mould open, trimming, measurement. Phone pictures are accepted if clear. Customer part marks are covered. The brief says who takes each picture. The brief also names the days the presses are running, since a mould open on a press is easiest to photograph then.
- 5
Build the drawing form and test it
The form takes a drawing file, a photograph of an old part, a quantity, a compound and a note on tool ownership. We test it with sample files of the kind your buyers send. The notification goes to the estimator and into the enquiry record.
- 6
Launch and read enquiries against the old site
After launch we test every form, link and page again on a phone. The owner then reads the enquiries against the record taken from the old site. We report what arrived and from where, and leave a short guide for editing pages. The record of enquiries from the old site, kept before launch, is the figure used for comparison.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Do we show certificates on the site?
Can the site show prices?
Should the site list the maximum part size?
Who updates the site when a new press arrives?
Do we need a page for every part we have ever made?
How do we keep the site current when a new press arrives?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for rubber moulding companies
Related work to consider.
Closest to this: search and visibility
Also for rubber moulding companies
Or start from the overview: sales and marketing for rubber moulding companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.