Skip to content
GullySales

Aluminium fabrication contractors · Website

Build a site where a contractor can see your work and ask for a visit.

A website for an aluminium fabrication contractor is a small set of pages showing what you fit, where, with which sections and finishes, and how to ask for a measurement visit. GullySales builds it around your finished sites, not around a generic company profile.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Fabricators inspect laser-cut panels and bent metal enclosures

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For aluminium fabrication contractors

Where it usually goes wrong, and what we would do.

  • “The contractor checks the site before recommending you”

    An interior designer asked for a fitter looks at your website or profile first. If it shows no sites and no crew, they name someone else without telling you.

  • “A single page for everything hides the work”

    Windows, partitions, shopfronts and cladding on one scroll leave the visitor hunting. Separate pages let a shop owner see shopfronts and a flat owner see balcony work.

  • “Phone numbers that ring unanswered”

    A site visit request that lands on a mobile switched off during a fitting loses the buyer. Say when calls are answered and give a form and a WhatsApp link as well.

  • “Slow pages on a phone”

    Buyers open the site on a phone at a site or a shop. Large uncompressed photographs make the page wait. Pages need images sized for phones.

What we do

What we deliver for aluminium fabrication contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A page for each type of work

    Windows, partitions, shopfronts, cladding, railings, ceilings and repair, each with real sites.

    Result: Each kind of work has its own page.

  2. A sites-fitted page

    A list of sites with area, type of work and, where permitted, the client or contractor.

    Result: Buyers can see where you have worked.

  3. A measurement visit form

    A short form for address, work type, drawings and contact, which writes into your enquiry sheet.

    Result: Each request arrives as a record.

  4. A contractor page

    Crew size, work types, finishes and a downloadable sheet for interior firms.

    Result: A contractor can take your details to a client.

  5. Photographs prepared for phones

    Images sized and captioned so pages open on a mobile connection.

    Result: Pages load for a buyer standing on a site.

  6. A simple handover

    Logins and a short guide for adding a new site after each job.

    Result: Your office can add a finished site itself.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Build pages that answer what a contractor looks up before recommending you.

[your workshop name] sites fitted
A page listing sites with the type of work, the area and the year, shown only with permission. A contractor checks this before putting your name to a client.
aluminium sliding window fabricator [area]
A page for the product with the profile series, glass options and finishes. It names the areas you cover and has one clear request-a-visit button.
aluminium partition and cabin work
A partition page with photographs of finished offices, the door and glass options, and a note on what the client must prepare before fitting.
railing and balcony enclosure design
A page of designs with the material and finish named, how the fixing is done and a photograph of the fixing detail. It earns trust from the buyer who will inspect.
Request a measurement visit
A short form asking for the address, type of work and a photograph, with a number that is answered. Read it on a phone, since most buyers will.

Who it is for

This is written for these aluminium fabrication contractors.

  • Sliding and casement window and door fabricators
  • Office partition and glass cabin fabricators
  • Shopfront and showroom aluminium work contractors
  • ACP cladding and elevation fabricators
  • Aluminium railing, grill and balcony enclosure makers
  • False ceiling grid and aluminium panel fitters
  • Home-based and workshop-based fabricators serving individual homeowners
  • Fabricators who work only as sub-contractors for interior firms

Before you decide

When this may not be the right fit.

  • You have no photographs you may publish, so the pages would have no work to show
  • Your calls are not answered during site hours, and the site would send visitors to a missed call
  • You change your products and finishes every season and nobody could keep the pages current

Before you decide

Agree the work. Know how to judge it.

Website for aluminium fabricators: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium fabrication contractors. Anything missing is noted in the written scope, with who will supply it.

Photographs of finished sites
Clear pictures of sites you have fitted, with the work visible and no private interiors or client boards in view. Phone images in daylight are acceptable. Without them, the pages are words alone, and a contractor who checks the site before recommending you sees no proof. Phone photographs are enough if the work is clear and the light is good.
A list of sites fitted, with permission
The sites you can name or describe, with the owner's yes recorded. A list with only areas and types of work is fine. Without it, the sites-fitted page is empty, and the contractor page loses the reference it was designed to carry. Even a short list helps, and we use only the sites you tick.
Domain and hosting accounts
Any web address and hosting you already own, or your choice to buy new ones in the firm's name. Without this, the site would sit on a borrowed address, and could vanish if the person who set it up leaves. If these are not yet in your name, we plan the transfer with you first, before the site is built.
The number and inbox for visit requests
The phone number that is answered and the address that receives forms, with the name of who watches both. If the number is unattended on site, say so and we plan a callback rule. Without it, visit requests are lost. Tell us the hours when the phone is answered, so the site can state them truthfully.
Section and finish information
A note of the sections, glass options and finishes you fit, from the estimator. Rough notes work. Without it, the pages say little, and a buyer who wants to know what they are paying for goes to a firm that states it. The estimator can write it in point form; we turn it into plain text for the pages.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Decide what a visitor must see first

    We ask what a contractor or owner needs on the first screen of a phone: what you fit, a photograph of a finished site, the areas you serve and a way to ask for a measurement visit. You decide what is left out, and that short list sets the pages. We keep the home page to what a phone screen can hold.

  2. 2

    Collect photographs and site details

    You give us photographs of fitted sites, the sections and finishes you use, the areas you serve and the numbers to show. Where something is missing we say so and plan a photograph visit. Nothing is invented to fill a gap in the pages. If a photograph is poor, we say so kindly and plan a visit to retake it with a camera or phone.

  3. 3

    Plan one page for each type of work

    We draw a plan with a home page, a page for each type of work, a sites-fitted page, a contractor page, a repair page and the visit form. You change the order or remove a page. We place the call and WhatsApp buttons so they sit within thumb reach. A repair page is included because old frames bring their own searches.

  4. 4

    Read the test pages with the estimator

    We put the pages on a private address, and you and the estimator read every line against the work. Wrong claims, missing details and unclear photographs are marked. We correct them and send the pages back for another read before anything goes live. We also read the claims about sections and finishes against your supplier's sheet before anything is released.

  5. 5

    Test the form and the buttons on a phone

    We send a visit request through the form from two phones and call through the buttons, and watch where each lands and who sees it. We test the pages on a slow connection, since the fitter and the buyer may well be on site. Faults are fixed before release. We also check that the form sends a copy to the shared address.

  6. 6

    Launch, hand over and read the visit requests

    After your approval the site goes live, with the domain and hosting in your name and the logins passed to you. We then read the visit requests against the record from before launch. You decide what to add. No traffic or enquiry count is promised. We note which work pages produced visit requests and plan the next page from that.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many pages do I need?
One for each type of work you want enquiries for, a repair page, a sites page and a contact page. Add more as work grows.
Should I show prices?
No rates. Rates vary with sections, finish and glass. Show what a quote covers and invite the visit.
Who owns the site?
You do. We hand over access and keep nothing back, so you can move or edit it later.
Should the site show prices?
Show what drives a price and a starting range only if you can stand behind it. Window rates change with glass, profile and size. A visit is needed for a quote, so say that and explain why the measurement matters.
Can the site show work in progress?
Yes, and it helps, since a half-fitted frame shows the sections and workmanship before the glass hides them. Choose sites where the owner agrees and nothing private is in view. We caption each picture with the work and the area. Mark clearly that the site is in progress, so a buyer is not misled about what a finished job looks like. Mark it clearly as in progress, and update the page when the site is finished, so a visitor sees the complete job later.
What happens to the phone number if the crew changes?
The number on the site should be the firm's number, not a fitter's, so it stays when people change. We use the office line or the business WhatsApp number on every button. If the person who answers changes, you only change who holds the phone. The site, the profile and the board all keep the same number. Whoever answers should have the same script, so the buyer hears the same answer whoever takes the call. We write that script with you.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.