Skip to content
GullySales

Kitchen appliance stores · Website

Build a site where a household can check fit and send the drawing in one step.

A website for a kitchen appliance store is the set of pages where a household or designer checks what fits, sees the models and sends a drawing to the shop. GullySales plans and builds the pages around those questions rather than around a catalogue of codes.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Kitchen Appliances product collection

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For kitchen appliance stores

Where it usually goes wrong, and what we would do.

  • “A catalogue of codes does not answer fit”

    A list of model numbers tells a household nothing about whether the chimney suits the hob. Pages should lead with the appliance type, the size it needs and what kitchens it suits.

  • “The drawing upload is the key button”

    The key action on the site is sending the kitchen drawing or cut-out sizes. A form or WhatsApp button that takes the drawing starts the quotation, while a generic contact form starts a delay.

  • “Photographs should show the working display”

    Pictures of the live chimney, the hob under flame and the service counter show that the shop is real. Stock images from the manufacturer show nothing about your showroom.

  • “Phones do the browsing”

    Households look at models on a phone, sometimes in the middle of a kitchen job. Pages must load cleanly, have large buttons, and make the call or message one tap away.

What we do

What we deliver for kitchen appliance stores.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Appliance pages with fit information

    Pages for each appliance type with cut-out sizes, duct notes and the kitchen layouts they suit.

    Result: Each page answers a fit question before the visit.

  2. A drawing submission route

    A button and form that take a drawing or cut-out sizes and send them to the quotation log and WhatsApp.

    Result: A drawing sent from the site reaches staff at once.

  3. A designer section

    A page of sizes, installation notes and a contact for designers, separate from the household pages.

    Result: A page a designer can bookmark.

  4. A service booking page

    A page for chimney cleaning and filter change with a number that is answered.

    Result: A route for the existing household to book.

  5. Showroom and area pages

    Pages with the address, hours, the display kitchen and the areas you supply.

    Result: A visitor can see where to go and what they will see.

  6. Site tracking

    Simple measurement of calls, messages and form sends coming from the pages.

    Result: You can see which pages bring contact.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Build pages that answer these questions and take the drawing.

chimney size for 4 burner hob
A fit page that lists chimney widths against hob sizes and ends with a button to upload the kitchen drawing.
built-in oven dimensions modular kitchen
A page of slot sizes for the ovens in stock, with the cut-out diagram a carpenter can print and use.
water purifier for hard water
A purifier page organised by supply type, with a note on filter service and a form to describe the water at home.
kitchen appliance supplier for designers
A designer section with delivery process, brand list and one contact, plus a way to send a project list.
book a chimney service visit
A service page with a short form for the model, address and fault, so the technician has the details before the call.
kitchen appliance showroom opening hours
A showroom page with the address, hours, parking and photographs of the display kitchen, matching the Google listing.

Who it is for

This is written for these kitchen appliance stores.

  • Built-in chimney, hob and oven specialists
  • Multi-brand kitchen appliance showrooms
  • Modular kitchen studios that also supply appliances
  • Water purifier and RO dealers with service teams
  • Mixer-grinder, cookware and small appliance stores
  • Dishwasher and microwave dealers
  • Commercial kitchen equipment suppliers for restaurants and canteens
  • Appliance stores supplying builders' show flats

Before you decide

When this may not be the right fit.

  • The shop cannot reply to a form within the working day, so an upload button would collect drawings that sit unanswered.
  • Your stock and prices change daily and no one will edit the site, so product pages would show models that are no longer available.

Before you decide

Agree the work. Know how to judge it.

Website for kitchen appliance stores: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from kitchen appliance stores. Anything missing is noted in the written scope, with who will supply it.

The domain and hosting login
Whoever bought the domain controls where the site points. We need the registrar login or the person who has it. If a former developer holds it, recovering it comes first, because the launch depends on it. Without it, a new address is the only option.
Current price list and the models to show
We need to know which models are on the site and whether you will show prices. A spreadsheet is fine. If you prefer prices by enquiry, say so, and the pages are written to invite the drawing instead. Missing price information leaves the pages with a model name and a request button.
Maker sheets and installation notes
Fit information on the pages must match the maker's specification and installation notes. A shared folder of PDFs is enough. Where a note is missing, we leave the detail off the site and mark it for your salesperson, because a wrong measurement on a page costs a return.
Photographs of the showroom and the service van
A household wants to see the shop it is about to visit. Clear photographs of the entrance, the display kitchen working and the van or service counter are needed, taken in daylight. Without them, we use the maker's images and the showroom page is thin.
Who will receive drawing submissions
Each submitted drawing needs a named person to open it, and a number or email that works. If submissions go to an unwatched inbox, the key button of the site fails. Name the person and a back-up before launch.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sit with the senior salesperson over the cut-out drawing

    We begin at the counter with the person who reads kitchen drawings across the counter. We watch how they check a chimney or hob against a cut-out, and write down the information a household would need to do the same alone. That sets the content of each appliance page. You decide which appliances the site should treat in depth and which only list.

  2. 2

    Take stock of the current site and its logins

    We list every page, form and service the present site has, and who holds the domain, the hosting and the email. You tell us what must stay, such as the service booking route or an old product link. We find out what a rebuild would break. What exists is an inventory and a clear decision between repairing and rebuilding.

  3. 3

    Draw the pages from the buyer's route

    We sketch the route from a search for a chimney to the drawing submission and the booking of a showroom visit, with pages for each appliance type, designers, service and the showroom. You approve the map before any design. The result is a sitemap in which no page is there only because competitors have one.

  4. 4

    Fill a test site with checked content

    On a hidden test site we place the appliance pages, the fit information, the photographs and the forms. Your salesperson reads every page against the maker's sheet and marks what is wrong. The drawing upload is tried with a real file from a phone. Nothing is public. What exists is a site you can test with your own staff.

  5. 5

    Decide the launch with the old addresses in mind

    Before going live, we agree with you how old addresses lead to new ones so that bookmarks and listings do not break, and who will receive each form's messages. You approve the launch. We switch over with the people who answer enquiries present. What exists is a live site and a plan for what to do if a form fails.

  6. 6

    Check the live site on real phones

    After launch, we test the pages on a low-cost phone and a slow connection, send a drawing and book a visit ourselves, and look at where visitors drop off. Then we hand over the logins and show your staff how to change a page. We read the first enquiries against the record you kept before launch.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we sell online?
Small appliances may sell online if you can deliver and handle returns. Built-ins depend on size and installation, so the site should lead to a call or visit.
Can the old showroom site stay, or should it be rebuilt?
We look at the existing site first. If the structure can carry appliance pages and a drawing route, we keep it; otherwise we say so and explain why.
Who keeps it updated?
You decide. We can set it up so staff change stock notes and photographs without help, and we record what changes need us.
Should the site show prices?
Show a starting price only where it holds and is kept current, such as small appliances. Built-ins depend on model, finish and the cut-out, so a quotation is needed. Say that plainly, and the household sends the drawing instead of leaving.
Do we need an online shop for chimneys and hobs?
Not necessarily. A built-in appliance depends on size, ducting and gas points, so buyers want the drawing checked first. Small appliances such as mixers sell more easily online. We recommend starting with fit pages, a drawing route and a showroom booking, and adding a shop later if the record shows small appliances are asked for. Payment and delivery rules then need your adviser's attention.
What happens to the website after launch?
You own the site, the domain and the content. Your named staff member can change prices, models and photographs using the editing guide we hand over, and we can be asked to help for specific changes. Hosting and any paid tools renew in your name. We do not hold the site hostage. If you move to another developer, we hand over the files and logins.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.