Skip to content
GullySales

Water heater and geyser dealers · CRM

Note every geyser you fit with its serial and locality, so a warranty call is answered from the sheet.

A CRM for a geyser dealer is one record of each enquiry, sale and fitting, so a warranty call, a descaling note or a replacement offer begins with facts. GullySales builds the fields, picks the sheet or software and sets the habit of filling it in, choosing only what your counter will keep current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A sales team agreeing pipeline stages before a CRM is configured

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For water heater and geyser dealers

Where it usually goes wrong, and what we would do.

  • “Paper bills hold the history”

    Someone turns over an invoice book for a unit sold seasons ago while the caller waits, and the shop looks unprepared.

  • “The fitter's phone holds the serial”

    The serial number sits in a fitter's photo gallery, so the shop has nothing to give when the maker asks for it on a warranty claim.

  • “The chat is the file”

    The quote and the visit date sit in a WhatsApp thread on one handset. A resignation takes the thread away.

What we do

What we deliver for water heater and geyser dealers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A buyer and unit sheet

    Columns for name, locality, water type, model, capacity, serial, sale date and fitter.

    Result: A sheet that settles a warranty question while the caller holds.

  2. An enquiry list

    Calls, messages and walk-ins in one list with source, rate quoted and next step.

    Result: A view of which buyers are still waiting for an answer.

  3. A descaling reminder filter

    A filter for units due a service note, limited to buyers whose consent is recorded.

    Result: A list the counter works through on a slow afternoon.

  4. A who-writes-what rule

    Counter staff log the enquiry, the fitter logs the serial and the owner reads the list.

    Result: A single page of habit that outlasts a change of staff.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

What goes in the record

The facts a geyser dealer should capture at each step of a sale, and who captures them.

Source and bathrooms
Entered by whoever answers the call. It shows which source sends buyers and gives the quote its basis.
Water in the locality
Entered when quoting. It selects the right descaling advice and shows which areas wear out elements early.
Model and serial
Entered by the fitter before leaving the house. The maker asks for it first on any warranty claim.
Fitter and fitting date
Entered at handover. It names who to ask about a complaint and starts the clock on the first service note.
Permission to contact
Asked at billing and ticked in the record. Only those who agreed receive a reminder.
When to move to software
Stay with the sheet while two people can keep it tidy. Switch when reminders and several users slow it down.

Who it is for

This is written for these water heater and geyser dealers.

  • Storage geyser retailers for homes and flats
  • Instant water heater and compact geyser sellers
  • Gas geyser dealers in cities with piped or cylinder LPG
  • Solar water heater dealers and installers
  • Heat pump and commercial water heating suppliers for hostels and hotels
  • Multi-brand electrical and bath fittings shops with a geyser counter
  • Builder and bulk-supply dealers
  • Authorised service and spare-part dealers

Before you decide

When this may not be the right fit.

  • No one at the counter or among the fitters will log a serial on the day of fitting, so a system would fill with blank cells.
  • You sell boxed units across the counter with no fitting or service, so there is no later contact to record.

Before you decide

Agree the work. Know how to judge it.

CRM for water heater and geyser dealers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from water heater and geyser dealers. Anything missing is noted in the written scope, with who will supply it.

The bill book and warranty cards
Paper or photographs, with buyer, date and model. These become the first records. If bills are missing, history begins from today and older units are marked unknown. Bills from units that have since been replaced stay in the pile, because a repeat purchase by the same buyer is worth knowing.
The fitter's phone photographs of serial labels
Pictures of unit labels taken on each job. We copy the serial into the record. If the fitter has not kept them, the serial field stays empty for older units and warranty checks rely on the bill. A batch of old photographs is fine; we read the label ourselves and note the ones that cannot be read.
The enquiry notes from WhatsApp
Chats with buyers that hold quotes and addresses. We export what is needed, not the whole chat. If the chats sit on a personal phone, tell us, because the record cannot depend on a number that may leave the shop. Exports from a phone include long personal threads, so we ask you to forward only the buyer chats that carry an address or a quote.
A choice of sheet or software
Tell us your budget and whether staff are comfortable with a shared sheet. If you leave it to us, we recommend the simplest tool the counter will open each morning. A tool nobody opens is worse than paper. Say also who will be the main user, because a tool built around the owner's habits can frustrate the counter that fills it.
A named keeper of the record
One employee who checks entries are made and corrected, with a stand-in. Without an owner the record ages, and the descaling list shows wrong dates. A review of blank fields by a manager is less useful than one person who notices them when entering the next sale.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Photograph the bill book and warranty cards

    We start by gathering what holds the history today: the paper bill book, the warranty cards stapled to bills, the fitter's notes and the serial numbers on the fitter's phone, which we note down in your own words. We copy only what is needed. You tell us which book is the master. The result is one pile of facts about units, buyers and fittings from which the fields are chosen.

  2. 2

    Choose the fields with the counter and fitter

    We sit with the counter person and the fitter and ask what they look up when a buyer rings about a leak, a warranty claim or a replacement. The answers decide the fields: buyer, address, unit, serial, date fitted, water type, last descaling. You cut anything staff will not fill. A short list that is filled beats a long one left empty.

  3. 3

    Enter the recent sales and the units under warranty

    We add the buyers whose units are still under warranty before older sales, because those are the calls that must be answered fast. Each record gets the buyer, the unit and serial, the date fitted and the fitter. You check a sample against the paper. After this step a warranty question can be answered from the sheet.

  4. 4

    Write the rule for who enters what

    We write a one-page rule naming who logs an enquiry, who records a sale, who adds the serial after fitting and who notes a service call. The fitter's entry can be a photograph of the label sent to the counter. You confirm the rule with the staff in the room. A field with no owner stays empty.

  5. 5

    Build the descaling and replacement filter

    From the records we make a list of units fitted some time ago in hard-water areas, so the counter can offer a descaling visit or a replacement unit. Your counter person decides how it is used and by whom. The list is only as good as the dates entered. Units in soft-water areas are listed separately, so the counter does not offer a descaling visit where the water does not call for it.

  6. 6

    Check the sheet against the paper counts

    We compare the sheet with the number of sales and enquiries you counted from the books before we began, to find what was missed in the move. You tell us which questions the record now answers that the paper could not. Gaps are listed for repair. No rise in repeat sales is promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will a spreadsheet do or must we buy software?
A sheet works while one or two people maintain it. Buy software when several staff take enquiries or when you want reminders to reach buyers who agreed.
What if the fitters will not enter the serial?
Tie it to completion: the job stays open until the serial is in the sheet. Keep the entry to a handful of fields that a phone can take.
Is the WhatsApp thread good enough as a record?
On its own, no. Threads cannot be searched by unit and go with the handset. Copy the facts into the sheet and keep the thread for conversation.
Whose data is it?
The shop's, so keep it in an account the owner controls, not on a staff phone. Take only what you need, record consent for reminders and check the current data protection rules with your adviser.
Is a shared sheet enough, or is software needed?
A shared spreadsheet does the job for a small dealer if one person keeps it tidy and the fields are few. Software becomes worth its cost when several people enter data at once, reminders must be sent automatically or the sheet grows past what the counter can search. We start with a sheet, set the fields and the habit, and move to software only when the sheet fails. Moving later is easy if the fields are clean.
Who owns the buyer data we collect?
The buyer data belongs to your shop and stays with you. We work on it only to set up the record and never keep a copy for our own use. Keep the logins in the owner's name, not a staff member's. Tell buyers plainly what you hold and why, for instance a serial number and a phone number to answer a warranty call, and check with your own adviser about privacy duties before you send reminders.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.