Skip to content
GullySales

Marketing KPI design · Marketing

Marketing should be judged on a few numbers everyone has agreed how to count.

Your agency reports leads, your sales head says half of them were wrong numbers, and your accountant shows the month's orders. Three people are using three meanings of the same word. A target set on any of them starts an argument.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

An analyst and manager compare measurement cards with a marketing dashboard

In one paragraph

Marketing KPI design chooses the handful of numbers marketing is judged on and writes down how each is counted. GullySales defines source of enquiry, qualified enquiry, cost per qualified enquiry, enquiry-to-order and repeat orders with you, takes each baseline from your own records, and names an owner and a review point for every one.

GullySales sits with those people and settles the few measures that matter for your business. A school counts a qualified enquiry differently from a bathroom-fittings dealer or a hospital. Each measure gets a written definition, the record it comes from, one named owner, and a date when it is looked at again.

The baseline comes from your own enquiry register, CRM export, invoices or call log, not from a published average. The sales-side scorecard is a different job, covered under sales metrics and KPI development. Building the dashboard that displays these numbers is marketing dashboard development, and sharing credit between channels is marketing attribution.

Who it is for

This is written for you if these sound familiar.

  • Owners whose agency report counts leads in a way sales does not accept
  • Manufacturers and dealers adding IndiaMART, website and exhibition enquiries into one total
  • Clinics, schools and hospitals counting every call, including wrong numbers
  • Retailers and D2C brands that know first orders but not repeat orders

Before you decide

When this may not be the right fit.

  • Businesses with no enquiry register or any record of orders, where keeping the records must start first
  • Owners who want industry benchmark numbers to copy as targets; the baseline here is only your own history
  • Teams that already have written definitions, owners and a review routine that people actually use

The problem

Does this sound like your business?

Common situations this work addresses.

  • “The report says leads are up and sales says nothing came”

    Marketing counts every form fill and missed call. Sales counts only people who could buy.

  • “We track twenty things and decide nothing”

    Reach, clicks and followers fill the review deck. None says whether to spend more or less next month.

  • “Nobody can say what a good number is”

    A target was copied from a blog or the last manager. Nothing from your own records says whether it is easy or impossible.

  • “Everyone owns the number, so nobody does”

    When cost per enquiry rises, marketing blames follow-up and sales blames the leads. No one person is asked to explain it.

Choose the right scope

Start with the work your business needs.

  1. First marketing scorecard definitions

    For an owner working from a register or spreadsheet.

  2. Agency report reset

    For an owner whose agency report and sales numbers disagree.

  3. Repeat order measure

    For a retailer, clinic or D2C brand that knows first orders but not returning customers.

What we do

The work we can include.

Each deliverable and the purpose it serves. Your written scope confirms what is included, who is responsible, and what it costs.

  1. Definition sheet

    One page per measure: what counts, what is excluded, the unit, the date it is counted on. Duplicates, wrong numbers, existing customers and test enquiries are dealt with in writing.

  2. Qualified enquiry rule

    A short checklist your sales team can apply to a single enquiry, such as need, authority to buy and a reachable contact. You sign it off with your sales head before any cost is calculated on it.

  3. Source map

    For each measure, the system of record: the enquiry register, CRM, GST invoice file or ad account. Where a source field does not exist yet, the map says so.

  4. Baseline sheet

    Starting values worked out from your past enquiries, orders and spend, with the period used. Where records are too thin, it says no target should be set yet.

  5. Owner and review calendar

    One named person for each measure, the meeting where it is read, and the point at which the definition is reopened.

  6. Recording changes list

    Changes to forms, call logs and order sheets needed to capture source and outcome. Your team makes them; GullySales writes down what each field holds.

How the result is measured

  • Enquiries with a recorded source of enquiry
  • Qualified enquiries under the signed-off rule
  • Cost per qualified enquiry, beside cost per enquiry
  • Enquiry-to-order conversion on a fixed counting basis
  • Repeat orders, counted apart from first orders

Recorded as a baseline before work starts, so every later report has an honest comparison.

Marketing and sales together

Your sales head signs the definition of a qualified enquiry.

Qualified enquiry and enquiry-to-order are shared measures, so the sales head approves the rule and the order record. Following up enquiries and recording outcomes stay with your sales team.

Decisions to make before the work starts

  1. Record quality

    Missing enquiry dates or unrecorded sources limit what can be baselined. Rebuilding old records is separate work.

  2. What is not included

    Dashboards, channel credit, campaigns and CRM setup are not assumed. Each can be scoped separately.

  3. Internal approval

    Your nominated owner approves the definitions and any target. For a clinic, hospital or school, your own compliance adviser reviews personal records.

This or a nearby service

Which piece of work fits your situation.

These services sit close to each other. The line between them, in plain words.

Sales metrics and KPI development
Choose sales metrics and KPI development when the argument is about sales numbers, such as pipeline stages and order conversion. Choose marketing KPI design when the argument is about marketing numbers, such as what makes an enquiry qualified and which source gets recorded.
Marketing dashboard development
Choose marketing dashboard development when the definitions are settled and you want spend, enquiries and orders in one view. Choose marketing KPI design when people still disagree on how each number is counted, because a dashboard built on loose definitions only displays the disagreement.
Marketing attribution
Choose marketing attribution when the open question is how credit for an order is shared across the several contacts a buyer had. Choose marketing KPI design when the first need is a short list of agreed measures, each with an owner and a review point.

A sample of the output

A definition sheet says how each marketing number is counted and who owns it.

This is the core page of the work. Read across each row: the measure, the exact counting rule, the record the figure comes from, and the person answerable for it. Shown here for a pump dealer.

Illustrative example, not client data. Yours is built from your own records.
MeasureCounted asRecord usedOwner
Source of enquiryThe first channel the buyer names when askedEnquiry register, source columnMarketing lead
Qualified enquiryBuyer states a need, has a decision maker and can be reached againEnquiry register, status columnSales manager
Cost per qualified enquirySpend on a channel divided by the qualified enquiries it producedSpend record and enquiry registerMarketing lead
Enquiry-to-orderQualified enquiries that became a recorded order, counted by sourceOrder bookBusiness owner
Repeat ordersOrders from a buyer who has ordered before, counted once per orderOrder book and customer listAccount manager

Before we start

What we need from you.

The work depends on these. Each says why it is needed and what happens when it is missing.

The enquiry register or its closest substitute
Baselines are read from your own history, so we need whatever records enquiries today, even a shared sheet. It must show a date and a source. Without it the baseline sheet stays empty and the definitions remain untested.
The order book for the same history
Enquiry-to-order and repeat orders need orders that can be matched to enquiries. A plain list with buyer names and order dates is acceptable. If orders cannot be traced to enquiries, those two measures are defined but left without a baseline.
Spend records for each channel
Cost per qualified enquiry needs the money spent on each channel, including agency fees if they are paid. Invoices or a ledger extract are enough. Where spend is missing, that measure is written up but cannot be calculated.
A sales lead who rules on qualified
Marketing cannot decide alone what a qualified enquiry is. One senior person from sales must attend the definition discussion and accept the rule. Without that person, the rule is only marketing's view and sales will dispute it.
One person who settles definition disputes
When sales and marketing disagree about a counting rule, someone with authority has to decide. Name that person before work starts. Otherwise the definitions stay in draft and the review point has nothing to review.

How it works

How the marketing KPI design work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Decisions and records first

    We ask what you decide on marketing numbers and look at what you hold: registers, exports, invoices, ad account screens.

  2. 2

    Shortlist of measures

    Each measure stays only if you can name the decision it serves and the record it comes from.

  3. 3

    Definitions settled with sales

    Marketing and sales rule on real enquiries from your register. The definition sheet is signed off before any baseline is calculated.

  4. 4

    Baseline from your history

    We count past enquiries and orders under the new rules and explain the gap to the old totals. Thin measures are marked not ready for a target.

  5. 5

    Owners and first review

    Each measure gets a person, and the first review runs on the new definitions.

Before you hire anyone

Do this first yourself.

Look at how the last three months of marketing numbers were actually counted before you set any target.

  1. Write down, in one line each, what your agency, your sales head and your accountant mean by an enquiry, a qualified enquiry and an order.
  2. Open your enquiry register or CRM export and pick twenty recent enquiries. Mark which ones sales would call qualified.
  3. Check whether each enquiry has a recorded source, such as IndiaMART, Google, Meta, walk-in or referral. Note how many are blank.
  4. Add up spend and orders for the same three months from your own bank, invoice and ad account records.
  5. List the numbers in your monthly report, and strike out any that you have never used to make a decision.

Judge any provider

What to ask any provider of this service.

Useful whoever you choose, including us.

  • Will you write down the definition of each measure, including what is excluded?
  • Who signs off the definition of a qualified enquiry, and is sales part of that?
  • Where will the baseline come from, and what happens if our records are too thin?
  • Will you quote benchmark numbers as targets, and on what basis?
  • Who is named as the owner of each measure, and when is it reviewed?

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will you tell us what a good number is for our industry?
No. Published averages count different things in different ways. The baseline comes from your own enquiries, orders and spend.
We have no CRM. Can this still work?
Yes, if you keep an enquiry register, call log or order sheet. Choosing or setting up a CRM is separate work.
How is this different from building a dashboard?
This work decides what is counted. A dashboard displays it, and building one is marketing dashboard development.
Does this decide which channel gets credit for an order?
No. Source of enquiry records where the buyer first came from. Splitting credit across several touches is marketing attribution. For the sales-side scorecard, see sales metrics and KPI development.
Can you set KPIs for a hospital or clinic?
Yes, counting enquiries, appointment requests and repeat visits, not treatment outcomes. Your own compliance adviser reviews how patient records are used in any report.
What does it cost and how long does it take?
Scope, fee and term are set in writing after you send the requirements brief and we have a first conversation. We give no figure or duration before that.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.