Skip to content
GullySales

Auto glass, window film and tinting studios · CRM

Keep every car, every claim and every film warranty in one record.

A CRM for a glass and tinting studio is a record of each customer, each car, each job and each promise made, held in one place the whole team can read. GullySales works on setting up the fields, the stages and the habits that make the record useful.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A workshop coordinator recording vehicle service jobs

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For auto glass, window film and tinting studios

Where it usually goes wrong, and what we would do.

  • “The car matters as much as the customer”

    The same family returns with a second car, a sold car or a relative's car. A record by car and by person lets the studio say what was fitted, when and with which glass or film.

  • “Warranty dates are lost on paper”

    A film warranty or a glass guarantee sits in a drawer, and the customer forgets it. A record with the date and the terms lets the studio remind the owner and honour the promise.

  • “Insurance jobs have steps that need a status”

    A claim moves from enquiry to survey to approval to fitting to payment. Without a stage for each, jobs wait and nobody knows why.

  • “Fleet customers need a different view”

    A fleet has a list of vehicles, one contact and a billing cycle. A flat customer list hides that, and the studio quotes without a record of what it agreed last time.

What we do

What we deliver for auto glass, window film and tinting studios.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Fields for car, job and warranty

    The details a studio needs: model, year, registration, glass or film fitted, warranty terms and date.

    Result: Any job can be found by the car.

  2. Stages for glass, film and claim jobs

    A pipeline for each type with its own steps, so a claim and a film job are not tracked the same way.

    Result: You see where each job is waiting.

  3. A fleet record with vehicles under one account

    One account with contacts, vehicles, rates agreed and billing notes.

    Result: Fleet quotes follow the last agreement.

  4. A simple CRM tool chosen for the size of the team

    A comparison of tools in ordinary use in India for a small shop, with the one that suits the team.

    Result: The team uses the tool because it is easy.

  5. Import of the existing booking book

    Past jobs cleaned and moved in, so the record starts with history.

    Result: Past customers are reachable from the start.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep a record for each car, with the fields that glass, claim and film jobs need.

Registration, model and glass fitted
The desk enters it at booking. It lets the fitter find the exact part used if the owner returns, and shows which models you fit most.
Claim status
The desk updates it at each step: documents sent, insurer response, job done. Owners ask where the claim stands, and the record answers them.
Film brand, windows and warranty card number
Entered by the fitter on completion. It lets the studio respond to a warranty question, with the card in hand.
Photographs at drop-off
Taken by the fitter and stored against the car. They settle a dispute about a mark that was on the car before the job.
Fleet account and contact
Entered by the owner for each fleet. It keeps vehicles and invoices under the right company and the right contact.
Referral partner
The desk marks whether a workshop, dealer or repeat customer sent the car, so you know who sends work.

Who it is for

This is written for these auto glass, window film and tinting studios.

  • Windscreen and door glass replacement for private cars
  • Windscreen chip and crack repair
  • Sun-control film and tinting for cars and SUVs
  • Studios that handle insurance cashless glass claims
  • Paint protection film and ceramic coating studios
  • Sunroof glass and rear glass replacement
  • Fleet glass and film for cabs, school buses and staff transport
  • Architectural and home window film installers working beside the car studio

Before you decide

When this may not be the right fit.

  • No one will enter job details, and a CRM would be filled in weeks later from memory.
  • You handle too few jobs for a tool to save time, and a notebook is enough.
  • You have no warranty cards or job sheets yet, so the fields would have nothing to hold.

Before you decide

Agree the work. Know how to judge it.

CRM for glass and tinting studios: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from auto glass, window film and tinting studios. Anything missing is noted in the written scope, with who will supply it.

The booking book and old sheets
The record starts with your history, so bring every register, spreadsheet and chat export. Photographs of pages are fine. Gaps in earlier years are acceptable, but cars with no date or owner wait for you to complete them. Please bring every source, even one with missing pages. Bring the sheets as they are.
Warranty terms for glass and film
The record carries a warranty field for each job, so we need the terms you give. Bring the card or letter you hand over. If terms differ by film or glass maker, tell us how, so the field is filled correctly. If terms differ by maker, tell us which applies to which job.
A list of insurers and the claim steps
Claim jobs have stages that depend on the insurer. Bring the insurers you work with and the steps you follow, from approval to payment. Without them, we build a simple claim status and ask the desk to correct it after the first week of use. Tell us the insurers and the steps from approval to payment.
Decide which staff may change the record
Customer data should not be open to everyone. Decide who can add, edit and delete, and who only views. Until you decide, only the owner and the desk may edit, and we widen access when you tell us. Tell us who falls into each group, and who leaves access when they leave.
Fleet customer contacts and vehicle lists
A fleet account needs the contact, the vehicles and the billing arrangement. Bring what you hold for each fleet customer. If a fleet gives vehicles only job by job, we begin with the contact and add vehicles as they arrive. Contacts can be added later. If a fleet pays by invoice, bring the invoice too.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Watch a claim job from call to delivery

    We follow one insurance windscreen job from the first call to the handover, noting every note written and question asked. You show us where information is lost. This tells us which fields and stages the record needs and which it can skip. You note down what is missing at each step.

  2. 2

    Design the record around car, job and warranty

    We shape the record so each customer holds cars, each car holds jobs, and each job holds its warranty and photographs. You approve the fields in plain words. Nothing is built in the tool until you have signed the list. The fields are listed in plain words on one page.

  3. 3

    Name the stages for glass, film and claim jobs

    We agree the stages each type of job passes, such as glass ordered, fitted, claim submitted and claim paid. Your supervisor changes the names until they match the floor. Everyone uses the same words for the same stage. The same words are used on the board and in the tool.

  4. 4

    Set up the fleet view for vehicle groups

    For fleet customers we set up an account that holds several vehicles, each with its own job history and film or glass record. You tell us who contacts whom at the fleet. The view is tested with one real fleet before others join. Each contact at the fleet is named beside its vehicles.

  5. 5

    Load the booking book into the record

    We take your booking book, sheets and chats and enter them in the new record, flagging cars with unclear details. You settle the doubtful entries. The imported set is checked against a handful of cars you choose, so you can see it is right. Entries that remain unclear are marked rather than guessed.

  6. 6

    Train the desk on a live job

    We sit with the front desk and enter a real enquiry and a delivery together, then watch them do it alone. We note what slows them and simplify the screen, so the tool is used at the counter and not left for later. The tool is used at the counter and not left for later.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
That depends on volume and the number of users. A small studio can start with a free tool or a shared sheet if the habit is right. Move to a paid tool when that outgrows it. We say which after reading your book.
Who should update the record?
The person who handled the job, at the time of the job. A record updated at the end of the week is wrong by Thursday. We set it up so the update takes little time.
What about customer privacy?
Keep only what you need and tell customers what you hold and why. Registration numbers and phone numbers are personal data. Check the rules on data with your own adviser.
Who should record the claim status?
The person who talks to the insurer, so the record is updated when the call happens. If the owner asks, whoever answers can read the status. A status updated by someone else later is a status that is already stale.
Can the CRM tell us when a film warranty is about to end?
Yes, if the application date and the warranty term are in the record. We set a reminder field against each job, so the desk can see which customers are due for a check. The message that goes out still needs your approval, and it must repeat only what the maker's terms say. Warranty terms must be in the record for the reminder to be right, and the message still repeats only what the maker states. The reminder still repeats only what the maker states.
If a studio employee leaves, whose is the history they entered?
Their access is removed the day they leave, and the history they entered stays with the studio. Because jobs are held against the car and the customer, not against a person, nothing is lost. We agree this rule with you at setup so that nobody takes customer data on a personal phone. We keep no copy of your records beyond what the project needs, and the account stays in the studio's name.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.