Skip to content
GullySales

Plumbing contractors · CRM

Keep every leak call, estimate and tower enquiry in one record the whole team can read.

A CRM for a plumbing contractor is one shared record of every caller, quote, site visit and project lead, so nothing lives only in a supervisor's phone. GullySales sets up a record that fits how your team works and teaches the habit of filling it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plumbing contractors at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For plumbing contractors

Where it usually goes wrong, and what we would do.

  • “The job is in the technician's phone, not the office”

    A technician takes a call on the way to a site, agrees a visit by voice note and forgets to tell the office. Two days later the customer rings again and nobody knows who promised what. A shared record starts with the first call.

  • “Repair and project leads need different stages”

    A leak call moves from call to visit to estimate to paid. A tower enquiry moves from drawing to BOQ to rate negotiation to purchase order, over a long stretch. One list with one set of stages hides both, so the record keeps two pipelines.

  • “Estimates vanish after the visit”

    A plumber quotes a concealed-line repair, the owner says they will think, and the quote sits in a WhatsApp chat. Without a status and a next date against that name, the job is lost to whoever calls back first.

  • “Past work is your best lead list”

    An apartment you plumbed three years ago has owners who will redo bathrooms and a committee that renews a contract. A record that keeps site, date and scope turns that history into a list of people worth calling.

What we do

What we deliver for plumbing contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Two pipelines, one record

    A repair pipeline and a project pipeline with their own stages, built in a tool your team will really open, such as a spreadsheet or a simple CRM.

    Result: Every open lead shows its stage and who owns it.

  2. Call and WhatsApp capture rules

    A set rule for logging a missed call, a photo sent on WhatsApp and a site visit within the same working day.

    Result: No enquiry exists only in one person's phone.

  3. Estimate status with a next date

    Each quote carries a status, an amount and the date the next call is due, visible to the office.

    Result: You can list every estimate that has gone silent.

  4. Site and scope history

    A record per building, flat or association showing what you installed, when, and any warranty promise you made.

    Result: A returning customer is greeted with their own history.

  5. A short training for supervisors and technicians

    A walk-through on a real day's jobs, so the people on the road enter the same fields in the same way.

    Result: The team fills the record without being chased.

  6. A report from the record, not from memory

    Calls answered, estimates sent, jobs won and contracts due for renewal, read straight from the entries.

    Result: Your weekly review starts from what was logged.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

What a plumbing contractor's record should hold for repair calls and tower work.

Kind of enquiry
Filled by whoever answers the phone: leak, renovation, tower package or maintenance contract. It decides which pipeline the enquiry joins.
Site and scope history
Filled by the supervisor after a visit. It shows what pipework you fitted at the flat or tower, so a later call is not a fresh diagnosis.
Estimate status and next date
Filled by the person who sent the quote. It lets the office chase on the right day and shows how many quotes are waiting.
Decision makers on a package
Names of the builder's project head, the consultant and the purchase officer. It lets you speak to each in the language they expect.
Contract end date
For maintenance contracts, the date the committee must renew. It tells you when to start the conversation, long before the committee changes.
Who changed the record last
The initials of the technician or supervisor. A disagreement over a visit is settled by seeing who noted what.

Who it is for

This is written for these plumbing contractors.

  • Plumbing contractors for apartment and villa projects
  • Commercial, hospital and hotel plumbing contractors
  • Sanitary and bathroom installation specialists
  • Drainage, sewer line and STP contractors
  • Rainwater harvesting and borewell recharge specialists
  • Pump, tank and pressure system installers
  • Emergency and repair plumbing services
  • Apartment and building maintenance contract providers

Before you decide

When this may not be the right fit.

  • Your technicians have no phone that can open a record, so the sheet would be filled once by the office and left.
  • You get few enquiries and the owner remembers each one, so a record would add writing without adding control.
  • You have not yet decided how repair and project leads differ, so the stages in a record would be a guess.

Before you decide

Agree the work. Know how to judge it.

CRM for plumbing contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from plumbing contractors. Anything missing is noted in the written scope, with who will supply it.

Every place leads are written today
Notebooks, phone contacts, WhatsApp chats and a spreadsheet may all hold leads. List them. If the set is not complete, some customers are lost at the switch. We use the list to plan what is imported and what is left behind.
A named owner for the record
Someone must answer for the record being kept up. Name the person and say what authority they have over technicians. Where nobody holds this, the record decays in weeks, and we advise starting smaller until an owner is found.
Two years of estimates and tower quotations
Past work is your best lead list, and past estimates show how long tower quotes stay open. Bring whatever exists. A thin history still helps, but the reports will be modest until the new entries accumulate.
A decision on who sees what
Only you can decide whether technicians see customer phone numbers and prices. Tell us your rule. If the decision is left open, we set the narrowest access first, and widen it when you say.
A phone for each person who enters data
Supervisors enter results on site, so each needs a phone that can run the tool. Say what devices exist. If some cannot, those people give a message to the coordinator, and the plan accepts a slower entry.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Walk one leak call and one tower quote

    We follow a real repair call and a real BOQ quotation through your office, noting who touches each and where it is written down. You show us the phone, the notebook and the sheet. The two paths become the two pipelines the record will carry.

  2. 2

    Set up the stages and the required fields

    We build the stages for repair and for project leads, along with the few fields that must be filled, such as locality, source, who can approve and the next date. You approve the list. Anything the technician will not fill in is cut.

  3. 3

    Load a month of real enquiries

    We enter a recent month of calls, estimates and tower quotations in a test copy and ask your coordinator to try it. You watch where they hesitate. The stages are changed until the entry matches how work really arrives.

  4. 4

    Check capture from calls and WhatsApp

    We test that a missed call, a WhatsApp photograph and a form on your website each create a line with the right source. You make a test call from your own phone. Any lead that fails to appear is traced before the team starts using it.

  5. 5

    Train supervisors on the site visit entry

    We sit with supervisors and technicians and practise entering a visit result, a photograph and a next date. You decide what happens when someone skips it. The training ends when each person has entered a real record.

  6. 6

    Switch over and read the first report

    On a date you choose, the old sheets are retired and the record becomes the only list. We read the first report against the counts taken before: calls, estimates sent and jobs attended. You see what the record knows that memory did not.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software for this?
Not at the start. A well-built spreadsheet or a free CRM tier holds a small firm. GullySales picks the tool by looking at how many people enter data and how they work, and moves up only when the volume needs it.
Our technicians will not fill forms. What then?
Keep their part to a few taps or a voice note and let the office enter the rest. A record the technicians resent goes stale, so the design starts from what they will really do on a site.
How should we store a customer's site photographs in the record?
Keep a photograph only where it proves hidden work, such as a pipe behind a wall, and attach it to the site entry. Remove images that show a home's contents or a person. Photographs of a customer's property are personal data, so share them only with those who need them.
What do we do with a lead we pass to another plumber?
Log it with a note that it was passed on and to whom. Close it so it does not appear as a lost quote. A passed lead still shows which route brought it and, if the other plumber refers work back, it shows the relationship.
What happens to the leads already in our notebooks?
We import those that are still alive, meaning an open estimate or a recent enquiry, and archive the rest as a sheet you keep. Old closed jobs can still feed the lead list for maintenance and renovation offers. You choose which kinds of old record to bring across, and we do not delete any paper or sheet.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.