Skip to content
GullySales

Building material distributors · Deal risk assessment

Before the next big project quote, check what is missing instead of trusting a promise.

Deal risk assessment for a building material distributor is a written check on each large open quotation, showing what is missing before the order and the payment can arrive. GullySales builds the checklist with your sales head, writes a note on each live project deal and names the next step, without inventing a probability.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A manager and salesperson review a proposal folder for missing approvals

What deal risk assessment means

Deal risk assessment is a short, written check on each open deal that shows what is missing before the order can arrive. GullySales builds the checklist with your sales head, writes a risk note on every live deal, and agrees what the owner does about each red one, without inventing a probability.

Last updated 14 Nov 2026.

For building material distributors

Where it usually goes wrong, and what we would do.

  • “A verbal go-ahead from the site is read as an order”

    The site engineer says the material is needed next week, so the salesperson marks the project as won. The purchase head has not seen the rate, the director has not approved the supplier and the work may be given to someone already on the approved list.

  • “The approving person is a stranger”

    Your contact is the site engineer or store keeper, while a project manager, a consultant or a director signs the purchase order. Nobody on your side has met them, so the deal waits at a desk you have never visited.

  • “A competitor is already supplying the site”

    A rival is on the site every week, and the builder keeps you only as a backup quote. You learn this when the buyer asks for a lower rate on a large quantity, after the specification and the habit are formed.

  • “The load goes out and the payment does not follow”

    Credit days, the billing party and the retention terms were never discussed while selling. They surface at the invoice, and a won order becomes a long overdue statement for the accountant to chase.

What we do

What we deliver for building material distributors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Deal risk checklist for project orders

    A one-page checklist written with your sales head. It covers decision-maker met, specified brand confirmed, competitor on site, rate validity, credit terms and billing party, with extra questions for your trade.

    Result: Every large quotation is read against the same questions.

  2. Risk note on each open project deal

    A short note per deal saying which checks are met, which are missing and the evidence for each. Deals are marked green, amber or red by the rule, and no percentage is attached.

    Result: The owner can read one paragraph and see why a deal is red.

  3. Next-step list for each red or amber deal

    One named step, such as meeting the purchase head, confirming the brand specification or agreeing credit terms, with the person who owns it.

    Result: A deal at risk has a person and an action against it.

  4. Credit and payment terms prompt

    A question set the salesperson asks before a large quotation goes out, so credit days, billing name and delivery stages are discussed while selling.

    Result: Payment terms are on the record before the first load.

  5. Review sheet for the sales meeting

    A one-page view of the open project deals sorted by risk, used for the discussion between the owner and the sales head.

    Result: The meeting begins with the deals that need attention.

How the result is measured

  • Open deals with a named and met decision-maker
  • Red deals with an owner decision and a dated action
  • Deals where the specification is agreed in writing

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these building material distributors.

  • Residential builders and apartment developers
  • Civil contractors on commercial and industrial sites
  • Independent house owners building with a mistri
  • Retail dealers and hardware shops in the surrounding towns
  • Interior and finishing contractors
  • Architects and structural consultants who specify brands
  • Housing societies and institutions doing repairs
  • Plumbing, electrical and tiling contractors who buy for their jobs

Before you decide

Agree the work. Know how to judge it.

Deal risk assessment for building material distributors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from building material distributors. Anything missing is noted in the written scope, with who will supply it.

The list of open project quotations
We need the open quotations with buyer, site, amount, stage and owner. A sheet or a photograph of the register is enough. Without it we cannot choose which deals to check. Include deals where a competitor is known to be supplying a part of the site.
Notes on deals lost or unpaid before
The best checklist comes from what went wrong. We need a few examples of deals lost to a competitor or paid late, with what the team noticed afterwards. Without them the checklist is generic.
Credit positions of the buyers concerned
A deal is risky if the buyer is late on payments. We need the outstanding report for the buyers on the list. Without it the credit question stays unanswered. Where the outstanding is disputed, tell us, and we mark the buyer as unclear rather than risky.
Salespeople present at the review
The deals are known by their owners. We need each salesperson for a short sitting. If they are absent, the answers come from the manager and may be optimistic.
A fixed slot in the sales meeting
The review sheet needs a place in the regular meeting, named by the sales head. If it has no slot, the risk notes are written and never read. The sales head should also agree that a deal marked red is discussed and not hidden.

How it works

How the deal risk assessment work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the open deals worth checking

    We take the open quotations and project orders with the sales head and choose which ones are large enough or old enough to check, such as an apartment project, a commercial site or a dealer scheme. You decide the cut-off. What exists afterwards is a list of deals with owners and the stage each has reached. Deals older than the usual project cycle are included even if small, because an old quotation that nobody has closed is itself a risk.

  2. 2

    Design the checklist for a project order

    From your past lost and bad-debt deals we draft a short checklist: is the approver known, is there a written order, is a competitor supplying, has credit been checked, is the delivery plan agreed with the godown. The sales head edits it. What exists afterwards is a checklist in your trade's words. We read the checklist against two deals from the past that went well and two that did not, and keep only the questions that would have told them apart.

  3. 3

    Run every open deal through it once

    With each salesperson we go deal by deal, asking the checklist's questions and marking answers as known, unknown or contradicted. We do not argue the answers. What exists afterwards is a first colour on every open deal, with the missing facts written beside it. Salespeople are asked for facts, such as the name of the approver or the date of the last site visit, and a guess is marked as a guess.

  4. 4

    Write notes and the next step for each

    For every red or amber deal we write a risk note and a next step: meet the approver, ask for a written order, confirm the site's stage, check credit with the accountant. The owner decides on deals that need a senior visit. What exists afterwards is an action for each risky deal. For each red deal the owner decides whether to go ahead with the quote, ask for an advance or step back.

  5. 5

    Hear the salespeople on their own deals

    After the first pass we meet each salesperson separately to hear where the colour on their deal seems wrong, what they know about the site that is not on the checklist, and what they would do next. We change the colour or the question when they are right. What exists afterwards is a checklist the team believes, with their own corrections added. We also record who in the buyer firm has the power to cancel the order.

  6. 6

    Check again at the sales meeting

    At the next sales meeting we use a review sheet to read the notes, mark what has been done and see which deals changed colour. Lost or paid deals are compared with the earlier risk. You decide what to add to the checklist. What exists afterwards is a checklist that has learned. The sheet keeps a short note on each deal that changed colour and why, so the checklist grows from real cases.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Does the risk colour tell us the chance of winning?
No. Green, amber and red show which checks are met and which are missing. We do not turn that into a percentage, because your records cannot support one.
Which deals should be assessed?
The large project quotations, supply contracts and dealer terms where one order moves the month. Counter sales and small repeat loads do not need it. The sales head and owner agree the cut-off together.
Will salespeople resent this checking?
It works when the checklist is short and the owner reads the notes. Salespeople are asked for evidence, not an opinion, and a missing check is treated as the next task rather than a mistake.
What colour does a deal with a verbal promise get?
Amber or red depending on what stands behind the promise. A verbal go-ahead from a site engineer with no written order, no named approver and no credit check is red, since it can vanish. The same promise with a written order, a known approver and credit cleared is green. The colour records what is known and what is missing, and the next step is chosen to fill the gaps, such as asking for the order on paper or meeting the person who signs.
Who sees the risk notes?
The salesperson who owns the deal, the sales head and the owner. They are working notes and not a ranking of people. We recommend keeping them out of the group chat where a buyer's name or amount might be seen by others. The accountant sees the credit side. If a note concerns a deal with a brand representative's involvement, the sales head decides what is shared. Notes are kept in the same place as the other deal records.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.