Skip to content
GullySales

Electrical equipment distributors · Repeat sales management

Ring the contractor who is due to reorder before a rival's counter does.

Repeat sales management for an electrical distributor is knowing when each contractor, panel builder and shop is due to buy again and having someone ask first. GullySales builds the purchase history from your invoices, works out each account's reorder rhythm, and sets up the due list and the check on accounts that have gone quiet.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A wholesale seller checks previous orders while calling an existing customer

What repeat sales management means

Repeat sales management is the routine of knowing when each customer is due to buy again and making sure someone asks before a rival does. GullySales builds the purchase history from your own invoices, works out the reorder rhythm account by account, and sets up the reminder to the account owner, the reorder offer, and the check on buyers who have gone quiet.

Last updated 14 Nov 2026.

For electrical equipment distributors

Where it usually goes wrong, and what we would do.

  • “A site buys by build stage, not by calendar”

    Cable and conduit go in before plastering, switches and lighting near the finish, panels towards the end. A contractor's next order is set by the stage the site has reached. A due list that records the site and its stage lets the counter call when the next package is needed, not after it is bought elsewhere.

  • “Consumables reorder and projects do not”

    Lamps, tape, lugs, glands and MCBs are bought each time an electrician finishes a job. A turnkey panel is bought once per project. Treating both alike produces a list of false reminders, so rhythms are set for the first and project stages for the second.

  • “Nobody rings the contractor who stopped”

    A contractor who ordered regularly and then stopped is noticed only if someone reads the ledger. A new counter opening near the site is a common cause, and nobody asks. A lapsed-buyer list hands whoever makes the calls a name and the last items bought.

  • “A reminder without an owner is noise”

    Telling the whole counter that a dozen contractors are due means nobody rings. Each account gets one named person, who writes down what the contractor said. The record of replies then shows which reorders followed a reminder.

What we do

What we deliver for electrical equipment distributors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Contractor purchase history by site

    Built from your Tally or Busy export, with each contractor's orders listed under the site they were for. Duplicate party names and missing item codes are marked for your staff to confirm.

    Result: The counter sees what a contractor bought for each site and when.

  2. Reorder rhythm for each account

    The gap between orders for each contractor and each regularly bought item, worked out from your invoices, with project and one-off bulk buyers flagged so they do not distort it.

    Result: The counter knows how soon a contractor's wire, MCBs and fittings come round again.

  3. Due list for each account owner

    A list of who is due, who is overdue and what they bought last time. It is a prompt for a person to act and not a promise that anyone will order.

    Result: Each account owner opens a list that names the contractors to ring.

  4. Make-wise offer sheet

    A short catalogue of the makes and items an account has bought, ready to send on WhatsApp, with an offer only where you approved it against margin and stock.

    Result: A reorder message carries the contractor's own items and nothing generic.

  5. Lapsed-contractor check

    A list of accounts that have missed their own rhythm by a clear margin, with the last order and any open complaint. Accounts that have gone far quieter pass to customer reactivation.

    Result: Quiet accounts are rung with a reason in hand.

  6. Contact and consent record

    The channel each account uses and what agreement you hold. Anyone who asked to stop is left off every list.

    Result: A past invoice is not treated as permission to message.

How the result is measured

  • Accounts with a recorded reorder rhythm
  • Due and overdue accounts contacted by their owner
  • Reorders traced to a reminder or catalogue

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these electrical equipment distributors.

  • Cable and wire distributors for building and industry
  • Switchgear, MCB and distribution board dealers
  • Motor, drive and automation component distributors
  • Lighting and LED project suppliers
  • Solar inverter, panel and BOS component distributors
  • Transformer, UPS and power equipment channel partners
  • Panel builders' component suppliers
  • Multi-brand electrical wholesalers supplying sub-dealers

Before you decide

Agree the work. Know how to judge it.

Repeat sales management for electrical equipment distributors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the current target, pipeline, and review format. Mark which decisions the manager can make and which still require the owner's approval.

Make the scope clear

Agree decision rights and the management routine, including who runs it after the engagement. Separate advice to your sales head from taking responsibility for an agreed part of the operation.

Check the work in use

A useful review ends with an owner and next action for the deals or constraints discussed. Revisit those actions before adding more dashboard measures.

Know when to change course

If a review only collects updates already available in the CRM, shorten it. Use the time to resolve a blocked decision or coach a specific piece of selling work.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electrical equipment distributors. Anything missing is noted in the written scope, with who will supply it.

A billing export of at least a full year
A year of invoices with party, date, make and value shows seasonal buying and project stages. More is better. If only a shorter stretch exists, the rhythm of annual buyers cannot be read, and they are marked as unknown.
Site and project names for contractors
A contractor may buy for several sites, and the stage of each site decides when materials are needed. Bring the names of sites where the counter knows them. Without site names, history is held only by contractor and a reminder may land at the wrong time. A rough note of the builder behind each site helps too, because a builder's next project can bring the same contractor back.
Proof that contractors said yes to messages
Gather whatever shows that a contractor or shop agreed to receive messages: a card, a chat, a form. Parties with no record get calls only until they opt in. If the record is thin, the message list is short.
The names of account owners at the counter
Decide which salesperson looks after which contractor. The due list is split by this. If accounts have no owner, the list goes to one person and soon becomes too long to use.
Your view of the lapsed accounts
Tell us which contractors you know stopped buying for a reason: a dispute, a move, a closed project. We leave them off the lapsed check. Without this, an unhappy account may receive a cheerful reminder.

How it works

How the repeat sales management work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Export the invoices and clean the party names

    We begin with a billing export covering a good stretch of trading and tidy the party names, because the same contractor may appear under three spellings and two phone numbers. The counter staff help us decide who is who. You decide which small or closed accounts to drop. The outcome is a clean list of accounts with their purchase history by site and by make.

  2. 2

    Read each account's rhythm and the exceptions

    We look at the gap between orders for each account and sort them into those who buy steadily, those who buy by project stage and those who bought once. You and the counter staff read our groupings and correct them with what you know of each site. The reorder rhythm for each account is then written down, with exceptions marked. We also mark accounts whose buying clearly follows a season, such as pre-monsoon repairs or festival lighting, so their reminders arrive before the season and not after it.

  3. 3

    Approve the due list and the reminder wording

    We build the due list that tells each account owner whom to ask this time, and the wording for a reminder or call. Make-wise offer sheets are drafted from what each account buys. You approve every message, and consent for messaging is checked party by party against the record you hold.

  4. 4

    Give each due list to a named owner

    Every account needs a person who sees the due list for it and acts. We agree who that is for each, test the list with them on a handful of accounts and fix what confuses them. Reminders that go to nobody are removed. The lapsed-contractor check is handed to the person who knows those contractors best.

  5. 5

    Run the first due calls with the counter

    The first due list is worked through by the counter while we watch, and each call or message is logged with the answer. We note which contractors had already ordered elsewhere and which had no need. You decide how to treat a contractor who says the project has stopped, and the record is updated.

  6. 6

    Read the orders that followed the reminders

    We set the orders placed after a reminder or call beside the earlier pattern for the same accounts, and list contractors who stayed quiet. The counter tells us why. You decide which rhythms to revise, which accounts to hand to the owner and which to let go. We record these decisions and update the rhythm sheet.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need a CRM for this?
No. An export from Tally or Busy and a shared sheet are enough to begin. Buy a CRM only once the counter is using the due list and asking for more than a sheet can give.
What about contractors who buy only when a project comes?
Their rhythm follows the project and not the calendar. We record sites and stages for them, and accounts with no pattern are left off the list instead of being given a false one.
Can we message every party in our billing software?
A past invoice is not permission to send promotions. We review what agreement you hold for each account and leave out the rest. Messaging and data rules change, so check the current position with your own adviser.
Can we message every party in the billing software?
Not safely. A party in the billing software is a customer, and that is not the same as someone who agreed to receive messages. Contractors, shops and builders all differ in what they accept. We use consent where you hold it and a call where you do not, and we check the platform's current rules and your own adviser's view for bulk messages. Starting with a smaller willing list protects the number and the relationship.
How do we treat contractors who buy only when a project comes?
They get a different treatment. Their record is built around the projects they have run with you and the stage at which they bought, and the reminder is a question about the next project and not a nudge to reorder. The lapsed check for them is a call at the owner's chosen moments. We do not force a steady rhythm onto an account that does not have one.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.