Skip to content
GullySales

AAC block manufacturers · CRM

Keep each project, its wall stage and its decision maker in one shared record.

A CRM for an AAC plant is the shared record of every architect, builder, dealer and project, with the stage of each site. GullySales works on setting up the fields, the stages and the habits so the record reflects what your team actually does.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For AAC block manufacturers

Where it usually goes wrong, and what we would do.

  • “A plant sells to a project, and projects move”

    A tower takes a long time to reach the walls, and a sales person's memory does not hold twenty of them. A record with the wall date is what tells you when to call and when to hold stock.

  • “Several people sit on one project”

    The architect, the consultant, the purchase manager and the site engineer each influence a supply. Held as separate phone numbers on separate pads, nobody sees that they belong to the same job.

  • “Dealer sales hide the end buyer”

    When blocks leave through a dealer, the plant sees a billing name and not the site. Recording which project a dealer supplied lets you follow the buyer and the repeat order.

What we do

What we deliver for AAC block manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A project-based record

    Each site stored with its location, floors, wall quantity, wall start date and every person linked to it.

    Result: One screen shows all about a site.

  2. Stages that match how AAC is bought

    From first enquiry through site visit, specification, quote, trial supply, running supply and repeat, agreed with your team.

    Result: Every project sits at a stage your team recognises.

  3. Contact roles on each project

    Architect, consultant, purchase head, site engineer, contractor and mason tagged by what they decide.

    Result: You know who to call about the drawing and who about the delivery.

  4. Dealer and end-site linking

    A way to note which dealer supplied which site and what the buyer asked for.

    Result: Dealer business is traced back to a real project.

  5. A short training for the sales team

    A session on what to record after a call and visit, with an example of a good entry.

    Result: The record gets used because it takes little time to fill.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Project and dealer fields that keep a block order from slipping away.

Project name and site town
Entered by the sales executive on the first call. It lets the dispatch team see which routes have pending supply.
Construction stage
Plinth, slab or walls, updated at each call. It tells you when the buyer is about to need blocks.
Architect and contractor contacts
Both on one record, filled by whoever first met them. It shows who specified AAC and who buys it.
Wall area or block estimate
Entered from the drawing. It sizes the order and flags a project large enough for a plant visit.
Adhesive or mortar in the quote
A yes or no set by the quoting person. It shows how many orders include your jointing product.
Dealer who supplied the site
Selected from a list. It reveals the end project behind a dealer sale.

Who it is for

This is written for these AAC block manufacturers.

  • Large AAC plants selling across districts and states
  • Regional units supplying a few cities
  • Makers who also sell jointing adhesive and plaster
  • Manufacturers with technical teams who train masons on site
  • Manufacturers selling through building material dealers
  • Suppliers focused on apartment and commercial developers
  • Producers selling to individual house builders through architects
  • Newer entrants in towns where brick is still the habit

Before you decide

When this may not be the right fit.

  • Your sales staff already keep project notes in their own phones and nobody has agreed to move them, so a system would start empty.
  • You have a handful of large accounts known to the owner personally, and a sheet is enough for now.
  • You do not have a person who will check the record every day, and a CRM that is not read does not change how quotes are chased.

Before you decide

Agree the work. Know how to judge it.

CRM for AAC block manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from AAC block manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quotation file and order register
We import from whatever holds your projects now. A messy sheet is acceptable. Without it, the record starts empty and everything is typed by hand, which tempts the team back to notebooks. Photographs of handwritten pages count as well.
A list of who handles which builder
Several people may touch one project. Bring a list of executives and their builders and dealers. If ownership is unclear, reminders go to the wrong person and projects fall between desks. Include executives who work only from sites.
The sales head's view of the stages
Only your sales head knows how a project really moves. Bring them to the session on stage names. If they cannot attend, the stages reflect our guess and need more correction later. A short sitting with them beats a long email.
Access to the billing software's reports
To link orders to projects, we need to see what the billing system exports. Bring a sample report. If it cannot export, we agree a simple way for orders to be entered once. Even a rough export helps, and we clean it.
A sitting for the whole team
Everyone who updates the record should see it set up in one sitting. Without that time, habits differ by person and the record is trusted by none. Pick a time outside dispatch rush. A shorter sitting repeated is also acceptable.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one project from enquiry to supply

    We take a recent site and follow it through calls, the quotation, the dealer, delivery and payment. You walk us through who touched it. This shows where the record breaks and which stages your projects actually pass through. The chain is drawn on one sheet that you can read at a glance.

  2. 2

    Name the stages as the wall rises

    Stages are named in the plant's words: foundation done, plinth, wall stage approaching, rate quoted, order confirmed, supply under way. You approve the names. A stage that nobody will update is dropped, because an unused stage makes the whole record untrustworthy. The stage list is short enough to fit on a phone screen.

  3. 3

    Set up project records with roles and dealers

    Each project gets a record that lists the architect, the contractor, the purchase manager and the dealer, each in their role. A dealer sale is linked to the end site. You decide which fields are required, and we keep the list short. Fields for the block size and the quantity are added where the estimator needs them.

  4. 4

    Load a few live projects and test

    We import a small group of current projects with their contacts into a test copy. Your sales head checks that each appears at the right stage, with the right owner, and that the dealer link shows. Wrong placements are fixed before real data moves. Duplicate numbers are merged only after you confirm they belong to the same person.

  5. 5

    Sit with the sales team

    We show each executive what they must update and what they can ignore, and each records one real project during the session. Anything they find confusing is changed on the spot. The short training ends when each person has done their part once. Executives who work from sites are shown the phone view too.

  6. 6

    Read the first filled-in pipeline together

    Once the team has used the record on live work, we compare it with the figures noted at the start: projects quoted, orders placed, supply repeated. You see where projects stall and which stage loses builders, and decide what to change. Builders who have gone quiet are marked for a call.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should we use?
The one your team will open every day. Some plants use a simple spreadsheet first, others a standard CRM sold in India. We set up the fields and stages in whichever you choose and move you later if the record outgrows it.
Will the team resist filling it in?
They will if it feels like surveillance. Keep the fields few, show them how the record saves them a search for a number, and let the sales head use the record in the review meeting.
Can the CRM connect to our billing software?
Sometimes, depending on the software. Start with a manual link by project name. Once the record is in use, we can look at what your accounting tool allows rather than paying for a connection first.
How do we record a project with several decision makers?
Keep one project record and attach each person to it with a role: architect, contractor, owner or purchase. A project stalls when one contact changes. Linked contacts mean a new executive can see everyone involved, rather than only the last person who answered.
What if the contact on a project changes midway?
Add the new person to the same project record with their role, and keep the old contact marked as no longer involved, with the date. Do not start a new project. The history of calls, quotes and site visits stays in one place, and the new contact inherits the context. A change of contact can mean the decision has shifted, so your executive should call the new person at once and note what they now want. The record then shows who has been spoken to and who has not.
Will the sales team resist filling it in?
Some will at first, which is why the record is built to save them effort and not add to it. Required fields are few, reminders point to real calls, and the owner reads the record in review meetings, so what is entered is used. We sit with the executives and remove any field that feels like paperwork. A record people see being used gets filled. We also set a short review in which you read the record with them.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.