Skip to content
GullySales

AAC block manufacturers · Manufacturing

The architect specifies the AAC block, and the mason decides whether it stays in the drawing.

A builder is planning forty flats. The architect has drawn the walls in AAC, but the site mason has laid brick for twenty years and asks why the blocks are so light and what to use as mortar. A plant whose sales person visits the site, shows the thin-bed adhesive and trains two masons answers the question the mason is really asking.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

In one paragraph

AAC block manufacturers make autoclaved aerated concrete blocks for walls. Marketing explains the material to the architects, builders and masons who still think in red bricks, and puts your plant on the specification. Sales then turns a project enquiry into a quoted, scheduled and repeat supply. GullySales works around your plant, your joint mortar and your trained fitters.

In a town where masons have only laid brick, AAC has to be explained. The sale is as much education as supply: how it differs from brick, how to cut and fix services, what plaster to use. A plant that teaches the site gives the builder a reason beyond price.

Last updated 14 Nov 2026.

How buyers decide

How AAC block manufacturers are chosen.

The decision starts with the architect or structural consultant, who puts AAC in the specification for weight, speed and thermal reasons. The builder's purchase team then asks plants for a rate delivered to site, the block sizes, the strength grade and the adhesive or mortar supplied alongside. The plant nearest the site, with consistent size and no breakage, wins.

Masons and contractors decide whether the material is used well. If the mortar is wrong or the fitting is poor, the result is cracks, and AAC is blamed. A plant that supplies fitting advice and an approved applicator earns the builder's trust.

Individual house owners come in through the architect or a contractor who has used AAC before. They compare the rate per cubic metre with brick, and ask whether it holds a nail and a wall hanging.

The problem

What usually goes wrong for AAC block manufacturers.

Common situations to check against your own enquiry records.

  • “Masons distrust a material they have not used”

    They lay it like brick, use the wrong mortar, see a crack and tell the builder AAC is the problem.

  • “Architects do not specify our plant by name”

    AAC is written into drawings as a generic material, and the builder buys from whoever quoted last.

  • “Brick yards undercut us on rate”

    A buyer compares our price per block with a local brick and does not see the saving in labour, mortar and plaster.

  • “We sell blocks and the mortar goes elsewhere”

    The adhesive and plaster that make AAC work are bought separately, and we lose that margin and control.

  • “Project enquiries are not followed up”

    A site visit happens, a quote goes out, and nobody asks again when the builder reaches the wall stage.

  • “Our website cannot answer a mason's questions”

    It lists sizes and a brochure and does not say how to cut, fix, plaster or hang things.

What we do

What we do for AAC block manufacturers.

Possible deliverables for AAC block manufacturers. Your written scope confirms what is included.

  1. A technical page for each block size and grade

    Dimensions, density grade, strength, thermal and fire information you hold test results for, with laying instructions and the adhesive to use.

  2. A site guide for masons

    A simple illustrated sheet, in English and the local language, covering the mortar, cutting, fixing of services and plastering, supported by a video from your own plant.

  3. An architect specification pack

    A short document with technical data, a model specification clause, details for lintels and openings, and your plant contact.

  4. Project enquiry tracking

    Every builder and contractor enquiry recorded with the stage of the site, the date the builder says the walls start and the person who decides.

  5. An approved applicator list

    A list of masons and contractors you have trained, shown on the website and handed to builders who ask who can lay AAC well.

  6. Report against the baseline

    Enquiries by source, architect specifications received, quotes and orders, set against the figures recorded when work began.

How the result is measured

  • Enquiries by source and by role
  • Architect and consultant specifications received
  • Quotes sent against orders confirmed
  • Masons trained and applicators listed
  • Adhesive and accessory sales alongside blocks
  • Projects with a follow-up logged at wall stage

Recorded as a baseline before work starts, so every later report has an honest comparison.

Worth a page and a campaign of their own

Architect and structural consultant specification · Developer and contractor project supply · Mason training and approved applicator network · Adhesive, plaster and accessories sold with the blocks · Dealer and retailer stocking · Technical content for site questions · Sample and site visit follow-up · Individual house builder education · Comparison with brick and concrete block that is fair

Priority campaigns

Campaigns for what AAC block manufacturers most want to sell.

Each one planned around when your buyers decide, and measured against the baseline.

  • Architect and consultant visits

    Presentations at studios and consultancies, a model clause and a plant visit invitation, aimed at those who design mid-rise housing near your plant.

  • Mason demonstration days

    Small hands-on sessions at a dealer or a site where masons lay a wall with adhesive and see the difference from brick.

  • Builder site visit programme

    Visits to sites using AAC and a short note on lessons from those sites, shared with builders planning their next project.

  • Brick versus AAC cost explainer

    A plain page and sheet that sets out wall cost, labour, mortar and plaster, with an example built from your own rates and clearly labelled as an example.

  • Dealer stocking drive

    A starter pack and training for building material dealers in towns with growing apartment projects, covering adhesive and accessories as well.

Beyond search

Where we reach buyers of AAC block manufacturers, beyond Google.

Search matters, but it is rarely the only way this industry's buyers find a supplier.

  • Architects and structural consultants

    Practices designing housing and commercial buildings inside your supply range receive the specification pack with the model clause.

  • Builders and developers

    Builders with a project about to start are given a supply proposal and a sample block to hold.

  • Masons and contractors

    The mason decides whether AAC is blamed or trusted, so the training sessions and the applicator list are built around the mason.

  • Building material dealers

    A building material dealer is where a small builder first sees AAC, so the stocking pack is written for the dealer's counter staff.

  • Individual house builders

    Owners read about wall materials before they speak to their contractor, and the explainer pages are written for that moment.

Why GullySales

AAC block plants need one firm that follows a specification to a confirmed delivery order.

An AAC plant is chosen first by an architect's specification, then by a purchase team comparing delivered rates. GullySales builds both ends: how the specifier finds you, and how the builder's rate request becomes a confirmed order from your plant.

  • From the specification to the delivery order

    A specifier naming AAC is not an order. We also build how the builder's purchase team gets a delivered rate, block sizes, strength grade and mortar details, and how each quote is followed until it is confirmed or lost with a reason. The plant nearest the site, with steady size and little breakage, is the one the builder can price with confidence.

  • Starting with the architect and the mason

    The plan starts from the people who decide: the architect or structural consultant who specifies, the purchase team that prices, and the mason who fits. Each gets what they check, instead of one brochure sent to all. Mortar and fitting guidance is part of the page, because poor fitting gets AAC blamed.

  • Counted by role, quote and applicator

    We record your current enquiries by source and role, consultant specifications received, and quotes sent against orders confirmed. We read the result in those counts, with masons trained and applicators listed on your own register. Nothing here is invented: the figures come from your own enquiry book and dispatch records.

  • Fee and scope on paper first

    Scope and fee go to the plant as a written note ahead of any work. We promise no specifications or orders. If your plant sits too far from the sites that ask, we tell you plainly instead of building a plan around them. Delivered rate and site distance are the first limits we ask about.

Sales and channel services

Choose the sales work your business needs.

Review the sales and channel catalogue in the context of aac block manufacturers. Each page states what the service covers and when it is unsuitable. A specialist programme is not assumed to fit every industry.

210 services available.

Sales strategy and process (29)
Sales training and enablement (29)
CRM, sales operations and RevOps (46)
Customer success and retention (42)
Fractional leadership and audits (22)
Dealers, distributors and partners (42)

A practical starting point · AAC block manufacturers

Start with one buying journey.

Use a real enquiry to find the first useful change. You do not need to buy every service listed on this page.

The record to review
Start with a recent RFQ and the quotation it produced. Remove buyer identifiers, then retain the specification, quantity, delivery requirement, and reason the order moved forward or stopped.
The buyer's question
Check whether the buyer can establish technical fit before asking for a price. Purchasing, engineering, and the end user may need different evidence from the same product page.
The handover to agree
Give the technical question to someone who can answer it, and keep the commercial follow-up with a named owner. A vague request for a catalogue should not be treated as a qualified RFQ.

Who it is for

This is written for these AAC block manufacturers.

  • Large AAC plants selling across districts and states
  • Regional units supplying a few cities
  • Makers who also sell jointing adhesive and plaster
  • Manufacturers with technical teams who train masons on site
  • Manufacturers selling through building material dealers
  • Suppliers focused on apartment and commercial developers
  • Producers selling to individual house builders through architects
  • Newer entrants in towns where brick is still the habit

Before you decide

When this may not be the right fit.

  • You want a guaranteed Google ranking or a guaranteed number of leads. Nobody honest can promise either.
  • You need enquiries by next week and have nobody to answer them.
  • You want posts and reach reported, not enquiries and orders.

How it works

How the work runs for AAC block manufacturers

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Look at how AAC is bought in your area

    Who specifies, who buys, and where brick still wins, based on your enquiries and quotes.

  2. 2

    Write the technical proof

    Specification pages, mason guides and the test results you hold.

  3. 3

    Set up the project record

    A record of each project's stage so follow-up matches the building schedule.

  4. 4

    Teach the market

    Architect visits, mason sessions and dealer packs.

  5. 5

    Follow each site through

    A call plan keyed to the wall stage, a technical contact for the mason during the build and a request for a reference at the end.

Where this fits

Three pieces of sales work, in this order.

Start by finding where enquiries and orders are being lost. Agree the changes to your sales process, then decide who will manage the work and review the results.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions AAC block manufacturers ask before they call.

Not here? More answers, or ask on WhatsApp.

Is it our job to educate the market?
In towns where masons and owners have not used AAC, yes. We help you teach through short sessions, a site guide and dealer packs, without a large cost.
Can you make claims about thermal or fire performance?
Only the ones your test certificates support, stated plainly with the lab and date. We do not add claims you cannot show.
Should we sell adhesive and plaster with the blocks?
That is a commercial decision for you. Where you do, we present them together on the site and in the quote, because the wall works better with the right mortar.
How do we win against local brick?
By showing the total wall cost with labour, mortar and plaster, and by making sure the mason can lay the block well. Where brick is still the better choice for a buyer, we would not push against it.
Do you work with dealers?
Yes. A dealer's counter is where a small builder first meets AAC, so a stocking pack and a short training go to the dealer.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
Fixes to reply time, follow-up and your Google Business Profile are the quickest to show, because the enquiries already exist. Ads can follow soon after follow-up is in place. SEO and content take longer. How long each takes depends on your business, and we tell you which applies to you after we have spoken. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
To start, last month's enquiries in any format and time with whoever handles them. After that, access to the accounts the work touches, such as the website, Google Business Profile or CRM.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Part of Manufacturing. See the other industries in the sector.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.