Skip to content
GullySales

AAC block manufacturers · Follow up systems

Call back when the walls start, because that is the day the builder buys.

A follow-up system for an AAC plant is the routine that brings your team back to each project at the stages that matter. GullySales works on the rules, reminders and messages so a quoted site is not forgotten.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For AAC block manufacturers

Where it usually goes wrong, and what we would do.

  • “The quote goes out and the silence begins”

    A builder who received a rate months before the walls are due does not call back. The plant that asks again at the foundation stage is the one remembered when the buying decision comes.

  • “A single reminder is not a system”

    A follow-up set for a fixed date ignores the site's own schedule. A delayed project needs a later call, and an advanced one needs an earlier visit, so reminders must follow the stage, not the calendar.

  • “After supply, the site still needs attention”

    The first truck is not the end. A call to ask how the laying is going, with a technical contact for the mason, prevents the crack that turns a builder against AAC.

What we do

What we deliver for AAC block manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Reminders tied to the wall stage

    A task created when a project reaches a stage, such as foundation complete or slab cast, rather than on a fixed date.

    Result: The call falls when the builder is ready to buy.

  2. A call script for each stage

    What to ask at enquiry, after the quote, before the first supply and after delivery, written in your sales team's voice.

    Result: Different people ask the same useful questions.

  3. Message templates for WhatsApp and email

    Short texts that restate the quote, link the technical sheet and ask one clear question.

    Result: A follow-up is sent from a template, not rewritten each time.

  4. A lost-quote review

    A call to ask a builder why they chose another supplier or brick, recorded in a fixed set of reasons.

    Result: You learn why quotes fail, not only that they did.

  5. A reference request after supply

    A polite ask, once the wall is complete, for a recommendation or a site visit by another builder.

    Result: Finished sites feed the next enquiry.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The stages of an AAC project where a short follow-up changes the order.

Quote sent to a builder
A call that asks whether the block count matched the drawing. Record the answer so a revised quote goes out the same day.
Site visit done
A message with the data sheet and the adhesive recommendation discussed on site. Log what the mason said, since that objection will come again.
Sample block delivered
Ask the mason to cut and fix a block, and note the verdict. A mason who has handled the block is easier to convert.
First delivery received
A check on damage and stacking. Enter any breakage claim so it can be settled before the next order.
Wall complete
Ask for a photograph and a word of feedback with consent. It becomes a post and tells you whether the builder will reorder.

Who it is for

This is written for these AAC block manufacturers.

  • Large AAC plants selling across districts and states
  • Regional units supplying a few cities
  • Makers who also sell jointing adhesive and plaster
  • Manufacturers with technical teams who train masons on site
  • Manufacturers selling through building material dealers
  • Suppliers focused on apartment and commercial developers
  • Producers selling to individual house builders through architects
  • Newer entrants in towns where brick is still the habit

Before you decide

When this may not be the right fit.

  • No one has been named to own the quote list, and a reminder system without an owner is switched off by everyone.
  • Your plant cannot yet promise a dispatch date, so chasing a quote would bring orders you cannot schedule.
  • The project list is incomplete and you do not know which quotes are open, so the first job is to write them down.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for AAC block manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from AAC block manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quotation list with dates and sites
Follow-up depends on what was quoted and when. Bring the quotation list with the date, the site and the contact. A rough list is acceptable. Without it, the review of quiet quotes cannot be done. Next we set the starting point for the quote review.
A note on how executives chase now
Tell us what your executives already do and what feels awkward to a builder. We build on the habits that work. If nothing is done at present, we say so and begin with a single rule. It helps to say what felt rude to a builder.
The name of who follows up on dealer sales
Where a dealer sells your block, the plant needs to know who calls the end site. State who does it, the executive or the dealer. If unclear, no one calls and the site is forgotten. If the owner calls, say so.
Permission to ask for references
A reference request after supply needs the builder's goodwill. Bring a list of builders you are comfortable asking. Without a list, the request is applied to everyone and loses its point. Your answer sets the limit on the request.
Delivery and billing dates for supplied sites
After supply, a call about the next lot depends on dates. Bring a sheet of recent deliveries. Without it, the reminders after supply cannot be timed to the stage of the building. A short sheet is enough to begin.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Go through the quotes that went quiet

    We take your list of quotations and mark those with an order, a refusal or silence. You tell us what you think happened with each. This shows whether silence follows the rate, the freight, a rival plant or a delay in your reply. We keep the list of reasons because that list shapes everything after it.

  2. 2

    Decide how the wall stage triggers a call

    With your sales head, we set which stage of building should prompt a call: foundation, plinth, columns, walls. The stage list is written plainly so an executive can ask the site engineer where the building stands and then record it. The stage list is signed off by you and shared with every executive.

  3. 3

    Write a call script for each stage

    For each stage we draft the questions an executive asks and the facts they offer, such as block sizes, mortar and delivery arrangement. You change anything that sounds like pressure. The scripts stay short enough to use on a phone call from a site. A line that would annoy a site engineer is not used.

  4. 4

    Prepare messages for chat and email

    Where a builder prefers to read, we write messages that carry a reason to answer: a data sheet, a laying guide, a question on the wall area. Your executive sends them from the business number, and you approve the wording before anything is sent. Messages are short enough to read on a phone at a site.

  5. 5

    Set reminders in the sheet or the CRM

    We place reminders where your executives already work, tied to each stage. A test project runs through, and you check that the reminder reaches the right person and says what to do. A reminder that fires wrongly is corrected before it is trusted. A reminder that fires wrongly is corrected before anyone trusts it.

  6. 6

    Review orders won, lost and gone silent

    We set the results against the starting record and talk through which calls and messages brought replies. You decide which rules stay, which scripts to retire, and whether the reference request after supply should be used more. Quiet quotes are read again for a lesson.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When should we call a quoted builder?
Let the site stage set it, not a fixed gap. A project near the walls needs a closer watch than one still at design. We build the rule around stages so the call matches the builder's own schedule.
What if the builder stops replying?
Ask once more with a useful reason, such as a change in rate or a new technical sheet, and then record the project as dormant with a date to look again. Repeated calls without news harm the relationship.
Can follow-up be automatic?
Reminders can, as can a first message. The call to a purchase manager should be a person's. Automate the prompt and the template, and keep the conversation with your sales engineer.
Who should follow up, the sales executive or the dealer?
Whoever holds the relationship, and say so in the record. Dealers talk to local builders every week, but an executive knows the specification. If the plant and the dealer both call, the builder hears two prices. Agree the split by project before you start.
What should the executive say when the walls have not started?
Ask what is holding the building, whether funds, approvals or the contractor, and offer something useful in the meantime, such as the data sheet or a note on mortar. Do not press for a decision before the builder is ready. Record the answer and set the next call for the stage the builder names. A courteous call that costs the builder no effort keeps the plant in mind until walls begin. The note also feeds the lost-quote review.
Who should follow up, the executive or the dealer?
The one who holds the relationship with the builder. If the dealer brought the project, let the dealer call first, and let the executive support with technical help and delivery details. If the builder came to the plant directly, the executive calls. We write a plain rule on who owns which kind of project, so two people do not call the same site on the same day. A site seen by one caller only should have one owner.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.