Skip to content
GullySales

Adhesive manufacturers · Website

Build a site where a tiler finds the right adhesive and a consultant finds the data sheet.

A website for an adhesive manufacturer is the product library, dealer locator and project folder in one place, readable on a phone in a tile shop. GullySales works on the page structure, the product data and the enquiry paths.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of chemical manufacturers at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For adhesive manufacturers

Where it usually goes wrong, and what we would do.

  • “Navigation should start with the surface”

    A visitor arrives with a floor in mind. A menu that begins with vitrified tile, stone, wall tile, plywood and flooring gets them to a product sooner than a list sorted by product code.

  • “The dealer locator answers the real question”

    A mason or builder wants to know where to buy the bag in their town. A locator by town and pin code ends the search. Without one, the visitor leaves for a rival's site that has it.

  • “Documents should not sit behind a form”

    Consultants need data sheets and classes. A form before every download loses them. Keep documents open and use the form for a sample or quote request.

  • “The phone is the screen that matters”

    Visitors open the site on a phone, sometimes on a site with a weak signal. Light pages, large call and WhatsApp buttons and text in the local language matter more than animation.

What we do

What we deliver for adhesive manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Surface-led site structure

    Pages organised by surface and job first, then by product, so a visitor reaches the right bag in a few taps.

    Result: Open the site on a phone and reach a product from a surface.

  2. Product pages

    Specification, pack sizes, coverage and preparation as text, with the data sheet to download.

    Result: Every product carries the facts a consultant asks for.

  3. Dealer locator

    A page listing shops by town and pin code, with phone and map link, kept up to date from your dealer list.

    Result: A buyer finds the nearest shop for the bag.

  4. Project documents area

    Data sheets, classes, application photographs and care notes in one open folder.

    Result: A consultant gets all project papers from one place.

  5. Enquiry paths

    Separate short forms for a dealer request, a quote request and a complaint, each routed to the right person.

    Result: Each enquiry reaches the person who can answer it.

  6. Genuine-bag page

    Pictures of the real bag and batch marks, with a way to report a doubtful one.

    Result: A dealer or mason can check a bag against the page.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

What a tiler, dealer or consultant looks for on an adhesive maker's phone-sized site.

tile adhesive for porcelain tile
A product page opened by surface, with the adhesive grade, the trowel notch and a method photograph, readable on a small screen.
tile adhesive technical data sheet pdf
A direct download, not behind a form, plus the same data as text on the page so it can be read without opening a file.
where to buy tile adhesive near me
A dealer locator by town and pincode, built from the dealers you actually supply, with a phone number for each.
how to apply tile adhesive
A method page with steps and a short clip in the local language, linking to the right product.
report a duplicate adhesive bag
A page for dealers and tilers to send a photograph of a suspect bag, with a note on what you will do with it.

Who it is for

This is written for these adhesive manufacturers.

  • Tile adhesive and tile grout manufacturers
  • Wood, ply and furniture adhesive makers
  • Flooring and vinyl adhesive producers
  • Construction bonding agent and repair mortar makers
  • Stone, marble and granite fixing adhesive makers
  • Wall putty and plaster additive producers
  • Sealant and silicone makers for building use
  • Regional bag-and-tin makers supplying hardware and tile dealers

Before you decide

When this may not be the right fit.

  • Your product data is held in several versions and no one can say which data sheet is current, so a new site would publish the confusion.
  • You expect an online shop to replace dealers, while your dealers set the rate and carry the stock.
  • No person is assigned to keep the dealer list and the data sheets current, and a stale site misleads buyers.

Before you decide

Agree the work. Know how to judge it.

Website for adhesive manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from adhesive manufacturers. Anything missing is noted in the written scope, with who will supply it.

Current data sheets and test reports
The latest document set for every product, with revision marks. Without them, the product pages carry names and pack sizes only, and the documents area stays empty.
The domain and hosting login
Owner access to the domain and the hosting, in the company's name. If a former developer holds them, we help you recover them. Without them, the site cannot be put live.
A verified dealer list with phone numbers
Each dealer's name, town, address and phone, confirmed with the dealer. Without it, the locator cannot be published, and visitors are sent to a general form that adds a step.
Photographs of packs, sites and finished work
Sharp photographs of packs and of tiled work with your product, taken on site. Phone photographs are acceptable. Without them, the pages use plain design and look unfinished.
A person who will update the site
Someone in the company who adds a dealer, replaces a data sheet and removes an old scheme. Without a named person, the site goes stale, and a stale site loses trust.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the products, surfaces and documents

    We collect every product, the surfaces it suits and each document you hold: data sheets, test reports, method cards. You confirm which documents may be public. What exists afterwards is a content list the site is built from. Documents you prefer to keep private stay off the list.

  2. 2

    Sketch the site from the surface down

    We draw the navigation so a visitor starts at the surface, then reaches the product, then the method. The technical person reads it for sense. You decide how the dealer locator and the documents area sit in the structure. The sketch is drawn on paper before any design is made.

  3. 3

    Write the product pages with the technical person

    Each product page is drafted from the data sheet and the technical person's explanation of use. Figures are copied exactly as printed. The technical person reads every page before you approve it. Pages without approval stay off the site. Pages awaiting approval stay on a hidden test address. The technical person's changes are recorded.

  4. 4

    Build the dealer locator from your list

    We turn your dealer list into a locator by town, with name and phone. You confirm each entry. A dealer who asked to be left out is removed. The locator has a clear route for a dealer who wants to be listed. The locator also shows a dealer's phone number and the product range they stock.

  5. 5

    Test on a phone at a counter

    We test the site on a basic phone with a weak connection, as a mason would use it at a counter. We check the call button, the document downloads and the form. You walk through it as a buyer and note what is slow. We note anything that is slow or unclear and fix it before launch.

  6. 6

    Launch and read visits against the old site

    After approval the site goes live, with old addresses redirected. We compare document downloads, dealer requests and builder enquiries with the figures recorded before the work. We tell you which pages carry visitors forward. We keep the old site on file until you confirm nothing important was lost, and we list every address that was redirected.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need an online shop?
Bags are bought through dealers, so a cart is not the start. Show where to buy and let the enquiry go to the dealer or your sales team. Revisit the question if direct sales are ever planned.
Should the site be in local languages?
Add the languages of the towns you sell in, starting with method cards and the dealer locator. Machine translation alone risks errors in a technical instruction, so have a reader who knows the trade check each page.
Who keeps the site up to date?
Name one person to update the dealer list and documents whenever a product changes. A stale data sheet on the site does more harm than a missing one.
Should the site be in local languages?
Yes, where your tilers work. Tilers read their own language on a phone before they read English, and a method page they understand is the one they act on. Keep the product names and numbers identical to the bag, and have a speaker of the language check the text.
Should dealers be able to take orders through the site?
Not unless you sell directly to the public, which adhesive makers rarely do. Dealers and distributors carry the stock, and an online shop would compete with them. A better route is a clear dealer locator and an enquiry form for bulk orders. If you want to sell small packs online, decide first how dealers will be treated. Orders for bulk quantities can be taken as an enquiry that the dealer in that town then completes.
Which languages should the key pages use?
Yes, where your masons and dealers read them. A short version of the key pages in the local language, with the method card and the dealer locator, reaches people a long English page does not. A native speaker translates and the technical person checks the result. Keep the languages few so every version can be kept current. Review the translated text after every change to the English. A native speaker checks each translation, and the technical person reads the figures again before it goes live.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.