Skip to content
GullySales

Aluminium profile manufacturers · Content marketing

Write the guides a fabricator keeps open while choosing a section for a job.

Content marketing for an extruder means publishing the guides, sheets and comparisons that a fabricator or specifier uses while deciding what to order. GullySales picks the topics from your enquiries and writes them with your technical staff.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Staff and customers inspect window frames and profiles in a showroom

What content marketing means

Content marketing is writing articles, guides and pages that answer the questions buyers search before they are ready to enquire. This makes your business visible and trusted before the first call. GullySales plans this content from the first conversation onward, choosing topics that match real search demand rather than guesses.

Last updated 14 Nov 2026.

For aluminium profile manufacturers

Where it usually goes wrong, and what we would do.

  • “The questions your desk answers are the content”

    Every day someone asks which section suits a heavy sliding door or how a powder coat differs from anodising. Written once, with a drawing, those answers serve every later fabricator and save a phone call.

  • “A comparison builds trust with a sceptical buyer”

    A fabricator suspects that an extruder will say anything. A plain page that sets anodising against powder coating, with when each suits the job, reads as advice and makes the next claim easier to believe.

  • “Architects need content a fabricator does not”

    A specifier wants sightlines, thermal break explained and glazing thickness limits. This is a different reader, and a single general article will not serve both. Keep fabricator guides and specifier guides separate.

  • “Content without an owner goes stale”

    A guide that quotes an old alloy or a withdrawn finish does harm. Each piece needs a named reviewer in your plant and a date, so outdated pages are found and fixed.

What we do

What we deliver for aluminium profile manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Topic list from enquiries

    A ranked list of guide topics built from the questions your desk and dealers actually receive.

    Result: You hold a list of pieces worth writing, each traced to a real question.

  2. Fabricator guides

    Short illustrated guides on choosing a section, matching finishes between lots and cutting and joining, reviewed by your technical staff.

    Result: A fabricator can read and share a guide on a phone.

  3. Finish comparison page

    A plain page comparing anodised, powder coated and wood-grain finishes and when each is chosen.

    Result: A buyer unsure of the finish has a page to send to the client.

  4. Specifier explainers

    Short pieces on thermal break, sightlines and glazing options written for architects.

    Result: An architect has something to read before a specification meeting.

  5. Review log

    A sheet recording who reviewed each piece and when, with a note of what must change if a die or finish changes.

    Result: Any page can be traced to a named reviewer.

How the result is measured

  • Pages published
  • Organic traffic
  • Enquiries from content pages

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts and pieces to plan

Write guides a fabricator reads while choosing a section.

Anodising against powder coating
A plain comparison with a photograph of each finish, ending with when each suits the job and the shades you hold.
Choosing a section for a heavy sliding door
A guide with a drawing, weight and track detail, reviewed by your technical staff before it goes live.
Why shade differs between lots
An honest explanation of bath and batch variation and how you handle a match, which pre-empts the dispute that costs accounts.
Thermal break explained for architects
A short specifier piece with a labelled drawing and a link to the test report.
Cutting and joining extruded sections
A workshop guide on cutting, corner joints and sealing, written from questions your desk hears.

Who it is for

This is written for these aluminium profile manufacturers.

  • Extruders of architectural sections for windows, doors and partitions
  • Anodising and powder coating extruders selling finished lengths
  • Curtain wall and structural glazing section makers
  • Industrial profile makers for conveyors, machine frames and enclosures
  • Solar mounting structure and rail section suppliers
  • Furniture, kitchen and wardrobe profile makers
  • Extruders with a branded window system sold through licensed fabricators
  • Smaller extrusion units supplying a district or a state

Before you decide

When this may not be the right fit.

  • No one in your plant can review a guide for accuracy, and a wrong statement about a finish would reach fabricators with your name on it.
  • Your range changes so much that a guide would be out of date before it was shared, and there is no named person to correct it.

Before you decide

Agree the work. Know how to judge it.

Content marketing for aluminium profile manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring questions from sales calls and examples of objections that delay a decision. Choose a subject expert who can check the substance, and identify evidence that can be published.

Make the scope clear

Agree the reader, buying question, format, and distribution route for each piece. Set the approval process and distinguish new research from rewriting material you already have.

Check the work in use

Ask a colleague to use the draft in a real buyer conversation. It should answer the question, support its claims, and make the next step clear without requiring a sales pitch to explain it.

Know when to change course

If the same unanswered question appears in several articles, improve the strongest page before commissioning another. More words are not a substitute for missing evidence.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium profile manufacturers. Anything missing is noted in the written scope, with who will supply it.

A month of recorded desk questions
Questions written down by the person who answers the phone, even in a notebook, show what fabricators really ask. Voice notes will do. If none exist, we begin by logging them for a stretch, and the first guides wait until the log has enough to choose from. Keep these in one place and add to them as new ones arrive.
Section specifications you can publish
A sheet for each section with weight, wall thickness, alloy and temper, and standard lengths, in a form you are willing to show. Rough is acceptable if correct. Without it a guide would carry general statements any extruder could make, which is not worth writing. Mark the sections that are still being changed.
Test reports you may share
If you hold thermal, structural or coating test reports, tell us which ones can be quoted and which are confidential. We never invent a test. When no report is cleared, the guides explain the section and the finish without mentioning any test. Hold back any report whose lab has not agreed.
A named reviewer for technical claims
One person with authority must read each guide for facts, and be reachable when we have a query. A shade statement or a tolerance figure that is wrong damages trust with the fabricator. With no reviewer, publication stops, because nobody is answerable for the page. Choose someone who knows the plant and the die room well.
Your view on discussing shade mismatch
Whether to write openly about batch-to-batch shade variation is an owner's decision. We can draft a plain explanation of how you control it, or leave the topic out. Tell us before the finish comparison page is written, as the page shapes around your answer. Even a short note from you now saves a rewrite later.

How it works

How the content marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sit with the desk and list questions

    We spend time with the people who answer calls and read drawings, and write down every question a fabricator or specifier has asked in the past few months: which temper, which finish, how long a length, how to cut a corner. You tell us which questions come up again and again. That list becomes the topic bank.

  2. 2

    Choose which guides come first

    From the bank, we choose the guides that would save your desk the greatest repeated explaining, such as how to read a section weight or how to choose between anodised and powder coated finish. You confirm the order and name the person who checks each guide before release. The first guide is the one the desk finds hardest to explain on a call.

  3. 3

    Collect the facts from your technical staff

    For each guide, your quality or die-room person gives us the figures, tolerances, finishes in stock and any test report they are willing to share. We note where each fact came from. If a fact cannot be confirmed, the sentence is dropped, not softened. Sources are kept in a note for your reviewer.

  4. 4

    Draft and read it aloud with sales

    We write the guide in plain words for a fabricator who is busy and sceptical, then read it aloud with one of your sales staff to find the sentences a fabricator would question. You get a clean draft to correct, with the technical statements flagged for your technician. Nothing reaches the site yet.

  5. 5

    Release the guide and brief the desk

    Once your technician and you have approved the guide, we publish it on the site and cut a short version for WhatsApp. We tell the desk what the guide says, so a fabricator who rings after reading it gets the same answers. The enquiry register notes the guide as the source.

  6. 6

    Read the guides against the enquiry sheet

    We look at which guides were opened, which led to drawing requests and which questions still reach the desk after a guide exists. This is read against the enquiry numbers recorded before we began. You decide which guides to revise, which to retire and which topics to write next.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who should write technical content?
Your technical or quality person supplies the facts and reviews the result. GullySales writes it in plain language and checks that the section names and finishes match your catalogue.
How do we know whether content is working?
Look in the enquiry register for fabricators who name a guide or arrive on a page you wrote. Reads alone say little. Orders that trace to a piece are the measure.
Is a section-cutting clip worth making beside the written guides?
A short clip of a section being cut, joined or checked can say what text cannot. Add it where a drawing is not enough, and keep written steps beside it for a reader on a site phone.
Should content cover shade mismatch openly?
Yes. Fabricators know shade varies, and a page that explains why and what you do about it reads as honest. It also gives your desk a link to send in a dispute. Do not promise an exact match across lots.
Can our technical staff review without writing anything?
Yes, and it is the better use of their time. We write the guide from their answers and your sheets, then they read it and mark errors. A review takes far less effort than authorship. What they must do is read every figure against the die list, because a wrong figure published once is quoted back to your desk for a long time. Their approval also gives the guide authority with the desk, because the same people can then answer a fabricator's follow-up call in the same words.
What if a guide shows a competitor's section is similar to ours?
We do not name competitors or compare against them. A guide can explain what a section is for and how to choose between your own dies and finishes. If a fabricator mentions a rival's profile, your desk handles that in conversation. Content that names another maker invites a dispute without winning an order. If you want a more detailed explanation of how to read shades, we cover it on a finish page that stays inside what your own plant can control.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.