Skip to content
GullySales

Aluminium profile manufacturers · CRM

Keep every fabricator, drawing, quote and credit note in one record anyone can open.

A CRM for an extruder is a shared record of each fabricator, the sections they buy, the quotes sent and the payments pending. GullySales sets one up around your enquiry routes and credit terms and trains the team to enter data the same way.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Staff and customers inspect window frames and profiles in a showroom

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For aluminium profile manufacturers

Where it usually goes wrong, and what we would do.

  • “The record lives in three phones and a ledger”

    The owner knows who pays late, the sales person knows who wants a slim section, and the accounts clerk knows the balance. Nobody can see all three, so a quote goes out to an account already on hold.

  • “A drawing needs a home beside the customer”

    A drawing arrives on WhatsApp and is quoted from a desktop folder. When the fabricator rings back, nobody finds the drawing. The record should hold the drawing, the rate sent and the date together.

  • “Credit status must show before the quote goes out”

    If the sheet that holds payments is separate, the person quoting cannot see that an account owes a large sum. Showing the status beside the account stops a quote that the owner would have refused.

  • “Dealer-owned accounts cause disputes”

    When a dealer and your own team both approach the same fabricator, someone is left out. The record needs an owner field and a rule for changing it.

What we do

What we deliver for aluminium profile manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Account and contact record

    A layout holding the fabricator, contact people, district, system, persona and the sections they buy.

    Result: Every fabricator has one page showing who they are and what they order.

  2. Quote and drawing log

    Fields for drawing, section, weight, finish, rate sent, date and outcome, linked to the account.

    Result: You can find any quote and its drawing from the account.

  3. Credit and dues view

    A column for terms, outstanding amount and the date of the last payment, visible to whoever quotes.

    Result: The quote desk sees the account's credit status before replying.

  4. Owner and dealer rule

    A written rule on who owns an account and how ownership changes, with an owner field in the record.

    Result: A disputed account has a named owner.

  5. Team entry guide

    A one-page guide and short training on what is entered, when and by whom, so records stay alike.

    Result: Different people fill the record in the same way.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep these fields against every fabricator account.

Sections bought
The sales person lists the dies each fabricator orders. It lets you offer a related section before they look elsewhere.
Preferred finish and shade
Entered by the sales person after the first order. It gives the quote desk the colour history when a match is questioned.
Credit terms and balance
The accounts clerk keeps it current, so whoever quotes sees the position before replying.
Drawing and rate sent
Whoever quotes attaches the file and rate, so a call back finds the exact drawing.
Account owner
Set by the owner. It settles who handles a fabricator reached by both a dealer and your own team.

Who it is for

This is written for these aluminium profile manufacturers.

  • Extruders of architectural sections for windows, doors and partitions
  • Anodising and powder coating extruders selling finished lengths
  • Curtain wall and structural glazing section makers
  • Industrial profile makers for conveyors, machine frames and enclosures
  • Solar mounting structure and rail section suppliers
  • Furniture, kitchen and wardrobe profile makers
  • Extruders with a branded window system sold through licensed fabricators
  • Smaller extrusion units supplying a district or a state

Before you decide

When this may not be the right fit.

  • Your accounts clerk and sales team cannot agree who enters what, so a shared record would hold half-filled fields nobody trusts.
  • Orders arrive only through dealers who hold the fabricator relationship, so your record would list dealers and miss the buyer.

Before you decide

Agree the work. Know how to judge it.

CRM for aluminium profile manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium profile manufacturers. Anything missing is noted in the written scope, with who will supply it.

Every contact list your team keeps
Phone contacts, the ledger of customer names, dealer lists and quote files all hold part of the picture. Bring them in whatever condition they are. If some staff will not share their phone contacts, we can only build from the rest, and the record starts with gaps. Do not clean them first; we do the matching.
The quotation file for the last year
Past quotes with drawings, sections and rates tell us what a fabricator history looks like in practice. Folders or printouts are acceptable. Without them the quote and drawing log starts empty and takes longer to become useful. Even a rough count of quotes sent helps us size the log, and we can fill the gaps with the desk as we go.
Credit limits and terms by customer
The accounts person should bring a list showing each customer's credit terms and limit, even if some are only agreed verbally. Where terms are not written, we mark them unknown. A CRM that shows wrong credit status is worse than none. If a limit is not agreed, say so plainly.
An owner who decides dealer disputes
Someone senior must rule on whose account a fabricator is when a dealer and your sales staff both claim. That person should attend the rule discussion. Without them the rule is drafted but not enforced, and the old arguments continue. Without a decision, the same fabricator stays in two sales staff's lists.
Two staff who will do the entry
The CRM is only as good as the people who fill it. Name two members of the desk who will enter quotes and drawings the same way, and give them time to be trained. If nobody is named, the tool goes unused after we leave. We write their guide with them, in their own words.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace a fabricator from enquiry to payment

    We follow one real fabricator through your business: the first call, the drawing, the quote, the shade sample, the order, the dispatch and the payment. You tell us who touched each step and where the information was kept. That map decides which fields the record needs. The map is kept to a single page.

  2. 2

    Gather the lists from phones and ledgers

    We collect the contacts kept in staff phones, the ledger, the dealer lists and the quote files, and merge them into one sheet. Duplicates are marked for you to resolve, because only you know whether two names are the same fabricator. Nothing is deleted without your decision. We keep the originals so that nothing is lost.

  3. 3

    Set the credit and dues view

    With your accounts person, we decide what the sales desk should see before quoting: the outstanding balance, the credit limit and any held cheque. Only these fields are shown, and only to those who need them. The view is tested against three live accounts. Hidden fields stay hidden unless you say otherwise.

  4. 4

    Write the owner rules for dealer accounts

    Where a dealer introduced a fabricator, we record who owns the account, who may quote and what the dealer is told. You write the rule, we put it in the record and the dealer sees only their own accounts. Disputes are settled by what the record shows. Dealers are told in writing before access begins.

  5. 5

    Test with three live enquiries

    We take three current enquiries and enter them the way the team will, from the drawing to the quote. Your staff do the entry while we watch and note every field they skip or misuse. We change the layout before it is used by everyone. A short entry guide is written from what they struggled with.

  6. 6

    Hand over and compare with the old habit

    On the switch, the old phone lists and ledgers stop being the master, and the team enters everything in the CRM. We then compare the quotes and receivables it holds with the figures from the old ledger recorded earlier. You decide who owns data entry and who checks it. Anything the record lacks is listed and added with you.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need special software?
Not at the start. A well-built sheet or a simple CRM your team will use beats a large system left empty. GullySales helps you choose one in ordinary use in India and set it up.
Who should enter the data?
Whoever takes the call or receives the drawing, at the time. Delayed entry from memory loses detail. The owner reviews the record, but does not fill it for the team.
Can the CRM connect to our accounts software?
Some can, and some need a manual export. Decide first what you need to see, such as dues beside an account, and then check what your accounts package allows.
Can dealer-owned accounts be kept in the same CRM?
Yes, with an owner field and a rule for changing it. Keep the dealer visible on the account but limit what the dealer sees. Fabricators reached by both parties are the main cause of disputes, so the rule is the key detail.
Can the CRM replace our accounts software?
No. The CRM holds the sales side: who the fabricator is, what was quoted, what is pending. Your accounts software remains the book of record for invoices and payments. We show the sales desk a read-only summary of dues so they can see credit status, but the ledger itself is not moved or changed. We can set up a regular export so that sales and accounts see the same customer names, without duplicating invoice entry or putting accounts data at risk. The connection is a decision for your accountant, and we advise on it before anything is joined.
What if a salesperson leaves with their contacts?
The fabricators belong to the company, and the CRM is where that is made real. Once the team enters every call, quote and drawing there, a departing salesperson leaves the record behind. We also set up access so that a leaving member's login is closed on the same day the person goes. Staff also sign the same rule as everyone else on handling customer data, and we keep the access list short so that only those who need a record can open it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.