Skip to content
GullySales

Aluminium profile manufacturers · Lead generation

Bring in fabricators who will order your sections again, not only ask for a rate once.

Lead generation for an extruder means finding window, door and facade fabricators who need the dies you hold and getting their drawings to your quoting desk. GullySales works on the target list, the enquiry routes and the record that shows which source sent which fabricator.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Staff and customers inspect window frames and profiles in a showroom

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For aluminium profile manufacturers

Where it usually goes wrong, and what we would do.

  • “A rate-only enquiry is a comparison, not a customer”

    A fabricator who rings three extruders for a rate per kilo is shopping. The enquiries worth building toward come from workshops that need a die, a finish or a delivery point you already serve, and the form or call script should find that out early.

  • “Dealers and fabricators send leads you never record”

    A dealer mentions a workshop in the next town, a fabricator forwards a colleague's drawing, and the name lives in one person's phone. Without a shared register, the referral is lost the day that person is on leave.

  • “Industrial and solar buyers look different from window fabricators”

    A machine frame builder or a solar rail installer asks for lengths, tolerances and cut-to-size service rather than anodised window colours. One enquiry page for all of them makes each of them leave without asking.

What we do

What we deliver for aluminium profile manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. District fabricator list

    Workshops by town with the system they use, the sections they buy and who placed the last known order, built from dealer contacts and trade directories.

    Result: Your sales person opens a district and sees which workshops to call first.

  2. Source-tagged enquiry register

    One sheet where every drawing, call and message is logged with where it came from: dealer, listing, search, visit or referral.

    Result: You can read which source sent the fabricators who actually ordered.

  3. Separate enquiry routes by buyer

    Short routes for window fabricators, industrial frame builders and solar installers, each asking the questions that buyer needs answered.

    Result: Each type of buyer reaches a form or script written for their drawing.

  4. Dealer referral rule

    A written note on how a dealer passes on a fabricator, who owns the account afterwards and how the dealer is told of the outcome.

    Result: A passed-on lead has a named owner and does not become a dispute.

  5. Lead review sheet

    A short page that sets enquiries received against quotes sent and orders placed, by source.

    Result: The owner sees where enquiries stall between a drawing and a quote.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Note these facts on every fabricator enquiry before quoting.

Section number or drawing
Whoever takes the call or message records it, so the quote desk can match the die you hold or flag a new die request.
Finish and shade named
Anodised, powder coated or wood grain, and the shade. It decides the line the order runs on and the colour match the fabricator will check.
Quantity in kilos and lengths
Fabricators buy by weight and standard length. The figure separates a trial order from a running account.
Delivery town
Freight shapes the landed rate. Recording the town early avoids quoting a district you cannot serve well.
Source of the enquiry
Dealer, listing, visit or referral. The sales person tags it so the owner can see which source sent fabricators who actually ordered.

Who it is for

This is written for these aluminium profile manufacturers.

  • Extruders of architectural sections for windows, doors and partitions
  • Anodising and powder coating extruders selling finished lengths
  • Curtain wall and structural glazing section makers
  • Industrial profile makers for conveyors, machine frames and enclosures
  • Solar mounting structure and rail section suppliers
  • Furniture, kitchen and wardrobe profile makers
  • Extruders with a branded window system sold through licensed fabricators
  • Smaller extrusion units supplying a district or a state

Before you decide

When this may not be the right fit.

  • Your quote desk already has drawings waiting unpriced, so more enquiries would only add to a backlog the fabricator will not wait through.
  • You have no stock or schedule to serve a new district, so enquiries from there would be declined after the fabricator has spent time.

Before you decide

Agree the work. Know how to judge it.

Lead generation for aluminium profile manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium profile manufacturers. Anything missing is noted in the written scope, with who will supply it.

The last year's enquiry sheet
This is the only honest record of who has asked you for a rate before. A spreadsheet, a diary or a stack of printed quotations is acceptable if the names and dates can be read. If it is missing, we begin the baseline from the first day of the new register, which delays any comparison.
Your sales ledger by customer name
We match the enquiries against who actually paid and reordered, so the target list copies your real buyers and not the loudest enquirers. Accounts software exports or a ledger photographed page by page will do. Without it we cannot tell a repeat fabricator from a rate shopper.
Dealer names and their areas
A one-page list of each dealer, the districts they cover and the fabricators they are known to supply lets us build the referral rule on facts. It can be rough and handwritten. Without it the rule is drafted blind and the first dispute with a dealer will reopen it.
One person to answer new enquiries
The test only works if a named person on your quoting desk takes the call, reads the drawing and enters the details. That person must be able to attend the test run. If nobody is named, new routes would bring drawings to nobody, and we would hold back the launch.
Your decision on districts to chase
Only you know which districts your trucks can serve at a sensible freight cost and which fabricators you are unwilling to take on credit. A short list of districts in order of interest is enough. Without that decision the target list grows wide and the desk follows names it cannot serve.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort last year's rate-check enquiries

    We begin with the enquiry sheet your quoting desk already keeps, the drawings that came on email and WhatsApp, and the list of fabricators who ordered more than once. You mark which names became customers and which only compared your rate. That gives us three groups to work from: repeat buyers, one-time buyers and silent enquirers.

  2. 2

    Map fabricators district by district

    We list window, door and facade fabricators in the districts your trucks reach, taking names from your dealers, your sales staff's notebooks, trade directories and the maps listings. You strike off the ones you will not supply and flag the ones your competitors serve. What exists afterwards is a first target list with a column for who knows each name.

  3. 3

    Agree the routes each buyer takes

    A window fabricator sends a drawing, a solar installer sends a rail length and a builder sends a project name. We sit with your desk and decide where each of them reaches you, whether a phone line, a form or a chat number, and who picks up. You approve the routes before any is advertised.

  4. 4

    Set the dealer referral rule with you

    Dealers pass on fabricators who ask them for a section, and today those names vanish into their phones. We talk through with you what a dealer-sent fabricator is, who owns the account, how a referral is recorded and what the dealer is told. The rule is written on one page that both sides sign off.

  5. 5

    Run a test drawing through the desk

    Before anything goes out, we send a sample drawing and a sample rate request through every route and watch where it lands. Someone on your desk answers it, enters it in the register with its source tag and passes it to the person who quotes. We fix whatever drops the enquiry on the way.

  6. 6

    Compare the register with the baseline

    Once the routes are live, we read the source-tagged register against the old enquiry sheet we started from. We count enquiries, drawings received, quotes sent and orders by source, and you decide which sources deserve more of your sales staff's time and which should be dropped. We do not promise a number.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we chase every fabricator who sends a drawing?
No. Quote every drawing you can make, but note which fabricators are only comparing. Those who order a second lot or ask about a new die deserve the visits and the credit conversation.
Where should an extruder look for fabricators who are not yet customers?
Start with your dealers, your own past quotes that went quiet, trade directories and window or facade project announcements in your district. GullySales organises these into one list so the same workshop is not called twice.
Can online listings alone generate enough leads?
They bring fabricators you would not meet, along with some who only compare rates. Treat a listing as one source among several and judge it by orders in the register, not by enquiry count.
How should a dealer-referred fabricator be recorded?
Log the dealer as the source and name the account owner at once. A fabricator passed on by a dealer should not be approached by two of your people. A written rule on ownership prevents a dispute later.
Who on our side must be involved in lead generation?
Three people matter: the owner who decides districts and credit, the person on the quoting desk who answers enquiries, and one sales executive who knows the fabricators. GullySales does the listing, the register and the route set-up, but the desk must enter every enquiry the same way. If only the owner takes part, the register stays empty. Their answers also show which fabricators buy on credit and which pay in advance, and that order shapes the target list we build for you.
What happens to the fabricators our dealers already supply?
They stay with the dealer unless you and the dealer agree otherwise in the referral rule. We record the fabricator, the dealer who introduced them and the district, so a later order is not argued about. Nothing is taken from a dealer without the rule being written first and shown to the dealer. If a dealer objects, you and the dealer go through the rule together and we change the wording, never the principle that the record belongs to the company.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.