Skip to content
GullySales

CNC machining companies · Technical presales and sales engineering support

Your programmer should not price drawings that were never going to become orders.

Technical presales for a CNC machining company is the work between a drawing arriving and a quotation your shop floor can stand behind: checking the part against your machines, materials and tolerances, answering the buyer's engineering questions, and agreeing what a first sample must show. GullySales sets up that routine with your sales and process people, keeps the records, and leaves every technical claim to your own engineers.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What technical presales and sales engineering support means

Technical presales support is the work between a buyer's technical question and a signed order: checking an enquiry against what can be built or delivered, preparing demonstrations and evaluation packs, and answering specification queries. GullySales sets up that routine with your sales and engineering teams, keeps the records, and leaves every technical claim to your own specialists.

Last updated 14 Nov 2026.

For CNC machining companies

Where it usually goes wrong, and what we would do.

  • “The drawing nobody read before it was priced”

    A drawing arrives by email or through a portal enquiry and goes straight to whoever quotes. Nobody checks whether the revision is named, whether the tolerance can be held on your machines, or whether the material is one you have cut before. The price goes out, the buyer accepts it, and the shop floor finds the problem when the first bar is clamped. A short technical check before pricing protects the quotation and the buyer's schedule alike.

  • “Questions only one person can answer”

    A buyer's design engineer asks whether you can hold a bore on a long thin part, whether a surface finish survives anodising, or whether your inspection room issues a report in the format their quality team accepts. The answer lives in the head of the senior machinist or the quality manager. When that person is busy on the floor, the buyer waits, and silence reads as doubt about the shop.

  • “A sample with no agreed pass mark”

    You send a first sample, the buyer's inspector measures it on a different machine from a different datum, and the part is rejected for a reason the drawing never stated. Neither side wrote down which dimensions were critical, how they would be measured or who would judge. A dispute about method starts the order badly, and the buyer remembers it at the next enquiry.

  • “Promises in the quote that the drawing does not carry”

    A salesperson agrees a tighter finish, a special pack or a material certificate in a phone call. The purchase order refers to the drawing alone, and the promise reaches the shop floor late or not at all. Each unrecorded commitment is a rework, a short delivery or a debit note waiting to happen, and the owner pays for it out of margin.

What we do

What we deliver for CNC machining companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Drawing review sheet

    A one-page check completed for each drawing before a price is built: revision, material, quantity, finish, tolerances outside your normal range, inspection needs and anything missing from the package. Your process lead sets which features trigger a second look, and the sheet travels with the quote record.

    Result: Every priced drawing has a completed sheet attached to its quote record.

  2. Capability and limits statement

    A plain statement written from your machine list, work envelopes, materials cut, finishes arranged through partners and the measuring equipment in your inspection room. It says what you do, what you do with a partner and what you decline, so a salesperson can answer yes, no or ask engineering.

    Result: A salesperson can answer a capability question from one approved page.

  3. Technical query log and answer bank

    A shared record of each engineering question, who asked, who owns the answer and the approved reply with the document behind it. Repeated questions about materials, finishes, certificates and measuring methods are answered from the bank, not from memory. Your technical owner approves each reply before any salesperson uses it.

    Result: A repeated buyer question is answered from the log with a named approver.

  4. Sample and first-article plan

    A written plan for each sample run: the critical dimensions, the datum, the measuring method, who inspects on each side, which report is returned and what counts as a pass. The buyer's inspector reads and agrees the plan before cutting starts.

    Result: The buyer and your shop hold one signed description of what a pass means.

  5. Inspection report and certificate pack

    The documents a buyer's quality team asks for, arranged in the order they ask: sample inspection report, material test certificate, process certificates you hold, calibration records for the gauges used and the drawing revision measured. You supply and verify each item; we organise them.

    Result: A buyer's quality team receives every document it asks for in one set.

  6. Deviation and clarification list

    Each point where your offer differs from the drawing or the buyer's request, with the reason and its status: accepted, under discussion or declined. The owner decides which deviations may be offered, and the list is attached to the quotation so the purchase order reflects it.

    Result: No commitment reaches the shop floor that is missing from the list.

How the result is measured

  • Enquiries passed through the qualification sheet before engineering time was spent
  • Technical questions logged, with an owner and an approved reply
  • Answers given from the approved bank, separate from answers written fresh

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these CNC machining companies.

  • Job shops doing contract machining
  • Precision component manufacturers
  • Auto ancillary machining suppliers
  • Aerospace and defence component machinists
  • Machine shops serving medical device makers
  • Prototype and low-volume machining shops
  • Sheet metal and fabrication shops with CNC capability
  • Export-focused precision machining units

Before you decide

Agree the work. Know how to judge it.

Technical presales and sales engineering support for CNC machining companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review orders by buyer type, offer, and route to market. Include lost proposals and capacity limits so the plan reflects what the team can actually sell and deliver.

Make the scope clear

Choose the target buyer and offer before setting activity targets. Agree responsibilities for finding opportunities, qualification, proposals, and the final commercial decision.

Check the work in use

Check whether the plan explains where the next suitable opportunities will come from and why buyers would choose you. Each priority needs an owner and a way to review progress.

Know when to change course

If the target assumes more delivery capacity or selling time than exists, change the plan. Raising the target does not create either resource.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from CNC machining companies. Anything missing is noted in the written scope, with who will supply it.

Recent drawings with outcomes
Share a set of drawings you quoted, marked won, lost or reworked. They show which features cause trouble in your shop. Without them the review rules are written from guesses, and the first rules will be too loose or too strict.
Machine and inspection list
List your machines with their work envelopes and the measuring equipment in your inspection room. The capability statement can only say what the equipment supports, and a missing item means we leave that capability out rather than assume it.
Certificates and sample reports
Gather material certificates, process approvals, calibration records and two or three past inspection reports. They become the proof behind the answer bank. A certificate that has lapsed stays out of the pack until you renew it.
A named technical owner
Choose the person who approves each answer and each deviation: the owner, the quality manager or the senior process planner. Without one, the log fills with drafts that nobody may send, and buyers wait for replies as before.
The buyer's quality requirements
Collect the supplier quality documents, drawing notes and report formats your regular buyers have sent. We build the pack to match what they already ask for, and a buyer with no written requirement is asked to state one before the sample.

How it works

How the technical presales and sales engineering support work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the last drawings you quoted

    You share a set of recent drawings and quotations with their outcomes. We trace which ones were complete, which were declined late and which turned into rework, rejection or a dispute over a sample. That record becomes the starting figures the work is read against at the end.

  2. 2

    Set the drawing review rules

    Your process lead and your owner agree which features need a second look: tolerances beyond what the machines hold comfortably, thin walls, deep bores, exotic materials, heavy finishing. We write the sheet and the decline wording, and the owner approves both before any buyer sees them.

  3. 3

    Write the capability statement and answer bank

    We draft the statement and the first answers from your machine list, inspection equipment, past reports and certificates. Any claim without a document behind it is marked. Your technical owner approves, edits or removes each line, because the shop answers for every word.

  4. 4

    Plan the sample and agree the pass mark

    For a live enquiry we write the sample plan with your quality person and send it to the buyer's inspector. The buyer confirms the critical dimensions, the datum and the report format. If they disagree, the disagreement is settled on paper before metal is cut.

  5. 5

    Record deviations and the accepted revision

    The buyer accepts a named drawing revision, and each deviation is entered on the list with the owner's decision. The quotation, the plan and the list are filed together so the person loading the job can see what was promised.

  6. 6

    Read the results against the record

    We compare the quote tracker with the figures recorded at the start: enquiries reaching review, drawings declined and why, samples passed on first inspection, rework and orders. You decide which rules to tighten, which to relax and which buyers deserve a standing arrangement.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will you review our drawings and say whether they can be machined?
No. Your own machinists and process planners judge whether a part can be made. GullySales builds the check sheet, the log and the plan around their decisions, and records what they decide. A claim that a tolerance can be held or a standard is met always comes from your own people.
Will a technical check slow down our quotations?
It adds one check before the price is built. A drawing that fails the check gets a clarifying question instead of a price, which is the reply a buyer's engineer respects. The sheet is one page, and routine drawings inside your normal range pass through it with a few ticks.
Can we use this if the owner is also the only programmer and quality person?
Yes. The sheet and the log then serve as a memory, not as a team process. The owner's judgement is written down once, so a salesperson or a new employee answers the same question the same way and the owner is interrupted less.
How do you treat our customers' confidential drawings?
Drawings are shared only with the people you name, through the channel you choose, and only as far as the work needs. Confidentiality terms in your buyer contracts apply, and your own adviser decides whether any drawing may leave your premises. Say so at the start and we work from samples or redacted copies instead.
Does this cover aerospace, defence or medical device work?
It covers the presales routine for any buyer, including those. It does not replace the quality system, approvals or audits those buyers require, and GullySales claims no approval on your behalf. Your own quality lead and the buyer's published requirements decide what you may state.
What if a buyer will not agree the sample pass mark?
The disagreement is recorded as an open point on the deviation list, and the owner decides whether to proceed, propose another method or decline. A job started without an agreed pass mark is a risk you take knowingly, with the record showing what was and was not settled.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.