Skip to content
GullySales

Technical presales and sales engineering support · Sales

Your engineers should not spend their days on enquiries that were never going to become orders.

A drawing arrives on Monday. Sales forwards it to engineering with the words 'please check'. Engineering answers a question nobody asked, or does not answer at all, and the buyer waits while two departments assume the other has it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A specialist demonstrates a product to prospective buyers

In one paragraph

Technical presales support is the work between a buyer's technical question and a signed order: checking an enquiry against what can be built or delivered, preparing demonstrations and evaluation packs, and answering specification queries. GullySales sets up that routine with your sales and engineering teams, keeps the records, and leaves every technical claim to your own specialists.

Technical presales is the layer that stops this. It decides which enquiries deserve engineering time, who answers which specification question, what a demonstration must prove, and who on the buyer's side signs off the specification. Without it, your best engineer becomes a free consultant for every buyer who asks.

The boundaries matter. Enterprise and solution selling is the selling method: discovery, buying roles and the business case. RFP and tender management is the bid paperwork for formal procurement. This service sits between them, in the technical work that makes a quotation safe to send.

Who it is for

This is written for you if these sound familiar.

  • Machine builders and equipment makers who quote against drawings, data sheets and site conditions
  • Software and systems firms whose buyer's IT team must review integration, hosting and data questions before purchase
  • Electrical, automation and process suppliers whose engineers answer every technical query by phone
  • Component makers asked for samples, test reports and approvals before a buyer lists them
  • Owners who are still the only person who can say whether a requirement can be met

Before you decide

When this may not be the right fit.

  • Businesses that sell catalogue items at a fixed specification, where a price list answers the buyer
  • Owners who want GullySales to design the product, run the demonstration or certify that it meets a standard. Your engineers and your own adviser do that
  • Teams without any technical person to approve answers, because nothing can be verified without one

The problem

Does this sound like your business?

Common situations this work addresses.

  • “Every enquiry lands on my engineer”

    Sales forwards each drawing and each query without a first check. The engineer spends the day on requirements that were incomplete, out of range or a price comparison.

  • “The buyer asked a technical question and we went quiet”

    The rep did not know the answer, and nobody was named to give it. The buyer's evaluator reads the silence as a weakness in the product.

  • “We promised something the shop floor cannot build”

    A rep agreed a tolerance, an interface or a delivery of data in conversation. Engineering found out after the order, when the specification could no longer move.

  • “The demonstration went well but the buyer will not decide”

    Nobody wrote down what the demonstration had to prove or who judged it. The buyer's team liked it, and each person left with a different view of what was agreed.

Choose the right scope

Start with the work your business needs.

  1. An enquiry filter for engineering

    For a team whose engineers read every drawing, start with the qualification sheet and the decline wording. Engineering time then goes to enquiries that pass a check you wrote.

  2. A single place for technical answers

    For a rep who improvises, build the query log and the approved answer bank first. A question that has been answered once is answered from the record the next time.

  3. A demonstration that settles something

    For a buyer who watches but does not decide, write the brief and the pass condition with the buyer. The demonstration then ends with a decision, or with a named gap.

  4. A specification nobody can reopen quietly

    For a supplier who absorbs changes after the order, add the sign-off record and the deviation list. A later change is then visible as a change, with a name against it.

What we do

The work we can include.

Each deliverable and the purpose it serves. Your written scope confirms what is included, who is responsible, and what it costs.

  1. Technical qualification sheet

    A one-page check run on each enquiry before engineering time is spent: is the requirement complete, is it inside what you build or deliver, which drawings or data are missing, and who on the buyer's side is asking. Your engineering lead sets the pass and decline rules.

  2. Specification query log

    A shared record of each technical question, the person who asked, the person who owns the answer, the approved reply and the document it came from. A repeated question is answered from the log rather than from memory.

  3. Approved answer bank

    Replies to the questions buyers ask again and again, such as compatibility, materials, interfaces, standards and support, written from your own data sheets and test reports. Your technical owner approves each answer before a rep may use it.

  4. Demonstration brief

    A written plan for each demonstration or technical presentation: what the buyer must see, which requirement each part answers, who attends from both sides and what counts as a pass. The brief is agreed with the buyer before the day.

  5. Technical evaluation pack

    The documents an evaluator needs to judge the offer without a phone call: specification summary, drawings, test evidence, compliance statements you hold and a list of open points. Your engineers supply and verify every item in it.

  6. Specification sign-off record

    A short document naming the version of the specification the buyer has accepted, who signed it on each side and what changed since the first draft. It stops a change after the order from arriving as a surprise.

  7. Deviation and clarification list

    Each point where your offer differs from the buyer's request, with the reason and the status: accepted by the buyer, under discussion or declined. Your owner decides which deviations may be offered.

  8. Engineering-to-sales handover note

    A summary written when the technical evaluation closes: agreed specification, open commitments, the buyer's technical contacts and any special conditions. The sales owner and the engineer who will deliver both read it.

How the result is measured

  • Enquiries passed through the qualification sheet before engineering time was spent
  • Technical questions logged, with an owner and an approved reply
  • Answers given from the approved bank, separate from answers written fresh
  • Demonstrations with a written brief and a recorded pass condition
  • Specifications with a signed version before the order
  • Orders that needed a technical change after confirmation

Recorded as a baseline before work starts, so every later report has an honest comparison.

Marketing and sales together

Your sales owner quotes only what engineering has already checked.

Sales receives a qualified enquiry, approved answers and a signed specification, instead of a drawing and a guess. A quotation then rests on a requirement both departments have read. The handover note carries the buyer's technical contacts and open points into quotation management and, after the order, to delivery. Marketing gets the questions buyers keep asking, as evidence for what the product pages and data sheets should say; writing them is separate work.

Decisions to make before the work starts

  1. Technical ownership stays with you

    Every answer, drawing, test statement and compliance claim comes from your own documents and is approved by your technical owner. If a claim has no document behind it, we mark it and leave it out until you supply one.

  2. Access to engineering time

    The work needs a named engineer who can approve answers and attend the review of closed enquiries. Without that person the bank and the log cannot be verified, and the scope shrinks to what the sales team can confirm.

  3. Product range and buyer variety

    A wide range of products, several buyer types or custom designs add to the answer bank and the briefs. Product design, sample production, certification testing and delivery engineering remain your work unless separately scoped.

This or a nearby service

Which piece of work fits your situation.

These services sit close to each other. The line between them, in plain words.

Enterprise and solution selling
Choose enterprise and solution selling when several people must agree on the problem and your team needs discovery questions, evaluation plans and coaching. Choose technical presales support when the strain falls on engineers, who check enquiries against what can be built and answer specification queries.
RFP and tender management
Choose RFP and tender management when a buyer issues a formal procurement document with requirements and a closing date to meet. Choose technical presales support when enquiries arrive informally and engineers lose time on specification questions, demonstrations and evaluation packs before an order looks likely.
Sales presentation and demo improvement
Choose sales presentation and demo improvement when the demonstration itself fails to answer the buyer's problem or loses the room. Choose technical presales support when the demonstration is sound but engineers are pulled in too late, or for enquiries that were never going to become orders.

A sample of the output

A technical qualification sheet tells engineering which enquiries deserve their time.

This is a filled sheet for a pump dealer. Each row is one check a salesperson makes before engineering is asked to help. Read across to see what is checked, the evidence to look for and the action if the check fails.

Illustrative example, not client data. Yours is built from your own records.
CheckWhat is askedEvidence to seeAction if it fails
Duty fitDoes the stated duty fall within the range we supply?Flow and pressure written in the enquiryDecline politely or refer the buyer elsewhere
Liquid and site conditionsAre the liquid, temperature and site known?Buyer's datasheet or site noteAsk the buyer for the gaps before engineering is involved
Standards namedDoes the buyer name a standard the pump must meet?Standard quoted in the enquiryPass to the specialist who owns compliance answers
Technical contactIs there a named person who evaluates the pump?Name and role in the correspondenceHold at sales until a technical contact appears
Demonstration needDoes the buyer ask to see or trial the pump?Written request for a demonstration or sampleWrite the demonstration brief with engineering

Before we start

What we need from you.

The work depends on these. Each says why it is needed and what happens when it is missing.

One engineer who approves answers
Every entry in the answer bank needs a named specialist who can stand behind it. Acceptable is one reviewer for each product area, with time to read drafts. Without one, answers stay unverified, and GullySales will not release them to the sales team.
The last enquiries, won and lost
The qualification rules are built from enquiries your team really received, so the sheet fits your trade. A folder or inbox export that includes the technical questions is enough. Without it, the rules rest on guesses and engineers keep filtering the wrong enquiries.
Current datasheets and product limits
Qualification can only reject what falls outside your range, so the limits must be written down. Datasheets in any tidy state will do if a specialist confirms them. Where limits are missing, the sheet cannot say no and engineering absorbs every enquiry.
A decision on who may decline
Someone must be allowed to turn away an enquiry that fails the sheet. Name that person, whether a sales head or an engineer. If nobody holds that authority, failed enquiries drift back to engineering and the filter becomes a suggestion.
Agreement on the sign-off owner
A specification sign-off is only useful if one person on your side accepts it for the buyer's order. A named approver is enough. Without one, specifications stay open and the deviation list keeps growing.

How it works

How the work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the last enquiries

    You share recent enquiries that reached engineering, with the outcome of each. We trace which ones were complete, which were declined late and where technical answers were slow to arrive.

  2. 2

    Set the qualification rules

    Your engineering lead and sales lead agree what a complete enquiry contains and what is out of range. We write the sheet and the decline wording, and your owner approves both.

  3. 3

    Build the query log and answer bank

    We draft answers from your data sheets, past replies and test reports, and mark any claim that has no document behind it. Your technical owner approves, edits or removes each answer.

  4. 4

    Plan the demonstration and the evaluation pack

    For a live opportunity we write the demonstration brief and assemble the pack with your engineers. The buyer reads the brief and confirms what the evaluation must show.

  5. 5

    Agree the sign-off

    We record which version of the specification the buyer accepts and who signs on each side. Your authorised person approves any deviation before it is offered.

  6. 6

    Hand over and review

    The sales owner receives the handover note and the engineering lead receives the logs. We review closed enquiries with both and change the rules where they failed.

Before you hire anyone

Do this first yourself.

Look at the last ten enquiries that reached your engineers and find out what happened to each.

  1. List the last ten enquiries that went to engineering and mark which became quotations and which became orders.
  2. Write down what a complete enquiry must contain before an engineer looks at it.
  3. Collect the five technical questions buyers ask most and find the document that answers each.
  4. Name the one person who approves any technical answer a rep gives.
  5. For your next demonstration, write what the buyer must see and who on their side decides.

Judge any provider

What to ask any provider of this service.

Useful whoever you choose, including us.

  • Who writes and approves the technical answers, and where does each answer come from?
  • What do you do with a claim that has no document behind it?
  • Do you run demonstrations, or plan them for my team to run?
  • How do you record which specification version the buyer accepted?
  • Where does your work stop and the work of my engineers or my adviser begin?
  • How are scope, fee and term set in writing?

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

Industry applications

Technical presales and sales engineering support needs the context of your industry.

Choose your industry to review its buying journey alongside the service scope, deliverables, responsibilities, and measurement. Specialist programmes explain their limits when the operating model does not match.

1,231 industries available.

Healthcare (103)
Manufacturing (198)
Professional services (79)
Retail (109)
Hospitality (68)
Real estate and construction (80)
Financial services (38)
Education (66)
Home services (67)
Automotive (52)
Wellness (52)
Non-profit (42)
Technology (53)
Logistics (40)
Other (184)

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do you supply the sales engineer?
No. Your engineers know the product and remain responsible for every technical statement. GullySales builds the routine, the records and the documents around them, and coordinates the work. Outsourced engineering is a separate arrangement with its own written scope.
Can you run the demonstration for us?
We plan it, write the brief and prepare the pack. Your people run the demonstration, because they operate the product and answer the follow-up questions. If you need coaching on how to present, sales presentation and demo improvement is the better fit.
Is this different from enterprise and solution selling?
Yes. Solution selling covers discovery, buying roles and the business case for the deal. This service covers the technical work inside it: checking the enquiry against what you can build, answering specification questions and agreeing the signed specification.
We answer requests for quotation constantly. Is that this service?
Partly. The technical check on each request sits here. Handling the requests themselves, from intake to decision, is RFQ management. Formal tender documents belong under RFP and tender management.
Can you tell a buyer that our product meets a standard?
No. A compliance or certification claim needs your test evidence and, where it is regulated, your own adviser or testing body. We record the claim, its source and the person who approved it, and nothing else.
How do we agree the fee and term?
Send the requirements brief, then we speak about your products and your enquiry flow. Scope, fee and term are set in writing, with GullySales time, media spend and production costs shown separately. There is no default term.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.