Skip to content
GullySales

Electrical equipment manufacturers · Outsourced dealer sales support

Your dealers ring with a stock query and nobody on your side picks up.

Outsourced dealer sales support, for an electrical maker, is a desk that answers the dealer counter's questions on ratings, schemes, quotations and pending orders while your sales team is on site visits. GullySales runs that desk inside a written scope, keeps the record in your own system, and passes anything on dealer terms or pricing back to you.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A field representative helps a hardware dealer follow up customer quotations

What outsourced dealer sales support means

Outsourced dealer sales support is a desk that handles a manufacturer's day-to-day dealer traffic: enquiry hand-offs, follow-up calls, quotation requests, order-status questions and dealer queries. GullySales runs that desk within a written scope, keeps every record in your own system, and sends anything touching dealer terms or pricing back to you.

Last updated 14 Nov 2026.

For electrical equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “The dealer's question arrives while the engineer is on a site”

    A dealer in the electrical market needs to know if a particular MCCB frame is in stock and what the scheme says. The sales engineer is inside a plant, phone silent. The dealer quotes another brand to the contractor standing at the counter.

  • “Enquiries handed to dealers vanish without a trace”

    An enquiry from a contractor in a dealer's town is passed over by phone. Nobody notes the time or asks later whether the dealer called back. Weeks on, the contractor says nobody replied, and the record cannot tell you who dropped it.

  • “The same questions are answered in different ways”

    Cable sizes against load, which switch plate fits which module, what the warranty card covers. Each salesperson gives a slightly different reply, and dealers repeat whichever answer suited the deal. A written answer sheet gives the counter one version.

  • “Quotations wait for a senior person to find time”

    A small panel enquiry from a dealer needs only the price list and the current scheme, yet it sits in a queue behind project work. The dealer, unable to quote, gives the electrician a competing brand's rate by the afternoon.

What we do

What we deliver for electrical equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A dealer desk scope document

    A written list of what the desk answers, what it hands to your sales head and who takes each item. Dealer margins, credit terms and discounts are named as yours alone.

    Result: You can point to the page that says what the desk may and may not say.

  2. A dealer query log

    Each call and message is recorded with the question, the answer given and the person holding any open item. Repeated questions are turned into a short answer sheet for the counter.

    Result: Your sales head reads which dealers ask what, and which answers were corrected.

  3. An enquiry hand-off record

    Each contractor or builder enquiry passed to a dealer is logged with the dealer's name, the hour sent and the outcome the dealer reports. Silent dealers get a follow-up call.

    Result: A lost enquiry can be traced to a name and a date.

  4. Quotation drafts from your price list

    Drafts prepared from the current price list and scheme sheet for standard items such as distribution boards, switchgear and cable runs. Your team approves each draft before it goes out.

    Result: Every quotation sent can be matched to an approval on your side.

  5. Order-status replies from your dispatch records

    Answers to where-is-my-order questions, prepared from the dispatch and invoice access you grant, with delays passed to your logistics contact instead of guessed at.

    Result: Dealers hear a status from a record, not from memory.

How the result is measured

  • Dealer queries answered and open items
  • Time from dealer enquiry to first reply
  • Enquiry hand-offs with a recorded dealer outcome

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these electrical equipment manufacturers.

  • LT and control panel builders
  • Switchgear, MCB and distribution board manufacturers
  • Wire and cable manufacturers
  • Switch, socket and modular accessory makers
  • LED luminaire manufacturers for industrial and commercial use
  • Architectural, façade and decorative lighting makers
  • Street and area lighting manufacturers supplying municipal tenders
  • Transformer, stabiliser and power equipment makers
  • Fan, motor and small electrical appliance manufacturers

Before you decide

Agree the work. Know how to judge it.

Outsourced dealer sales support for electrical equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Map existing partners, their territories, and the customers they serve. Review active selling and repeat orders separately from the number of partners signed up.

Make the scope clear

Agree partner fit, territory rules, onboarding, and support responsibilities. Clarify how direct enquiries and partner enquiries are assigned before starting recruitment.

Check the work in use

Follow a partner enquiry through to an order and the next purchase. Check whether the partner has the product knowledge and material needed to sell without repeated intervention.

Know when to change course

If current partners cannot sell because supply or support is weak, resolve that before recruiting more. A bigger network can spread the same problem further.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electrical equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

The current price list and scheme sheets
The desk answers from documents, not from memory. Current versions with validity dates are needed. When two versions circulate, the desk holds replies until you name the right one, and quotation drafts wait. We also need the date from which each scheme and price applies, because a dealer who quotes an expired scheme to a customer will ask your sales team to honour it.
Read access to dispatch and order records
Dealers ask where an order stands. Without a view of the records, the desk can only pass the question back to your staff, which defeats the purpose. A read-only login is enough for this, and it keeps your dispatch system safe from any change made by the desk.
A list of dealers with territory and contact person
The desk must know who is calling and what they are entitled to. A sheet with names, towns and the person to speak with will do. Unknown callers are treated with care and referred to you. If the same dealer buys through two branches, note that too, so a query reaches the right order record.
A named person who takes the hand-backs
Questions on rates and terms come back to you. Name one person who replies the same day. Where nobody is named, hand-backs sit and dealers lose trust in the desk.
Your own message to dealers about the desk
Dealers should hear about the desk from you first. A short note in your name is enough. Without it, they may take the desk for a stranger and refuse to deal with it. Name the sales head or a director as the sender, because a dealer reads such a note as a change in how business is done, and it needs a person of standing behind it.

How it works

How the outsourced dealer sales support work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Write the desk scope and its limits

    We sit with your sales head and write a one-page scope: questions on ratings, stock, scheme terms and order status the desk answers, and questions on price changes, credit and dealer terms it hands back to you. You sign it. Every later step depends on this line being clear, so the desk never improvises an authority it does not have.

  2. 2

    Hand over price lists and dispatch view

    You give us the current price list, the scheme sheets with validity and territory, the product data and read access to the dispatch or order records. We read them with your dealer-facing staff and mark where two documents disagree. Those conflicts are settled by you before the desk answers anyone.

  3. 3

    Write the answer sheet with your engineers

    From the dealer queries of the last season, we draft model answers for the usual questions on ratings, compatibility and quotation. Your application engineer corrects them. Each answer names the document it comes from, so the desk staff can trace a reply back, and anything not covered by an answer goes to you.

  4. 4

    Run a trial with a small group of dealers

    A few dealers you choose are told that questions will now be answered by a support desk working for you. We log every query and every reply, and your sales head reads the log with us. Wrong answers are corrected, the sheet is revised, and the trial widens only after the log is clean. Dealers outside the trial group keep calling your sales team as before, which lets us compare the two sets of answers and spot where the desk differs from your own staff.

  5. 5

    Answer live queries, hand back the rest

    The desk answers dealers on the agreed channels, logs each query in your record, and passes on anything touching rates, terms or complaints with the facts attached. Your sales head sees the log and the hand-backs. Dealers' quotation response times and complaints are read against the figures from before the desk began. Quotation drafts are prepared from your price list and wait for your approval where the order value or the discount lies outside the limit you set in the scope.

  6. 6

    Review the log and decide whether to continue

    We read the query log, the hand-backs and the dealer comments with your sales head. Which questions were answered without help, which kept returning to you, what needs a better answer sheet? You decide to continue, change the scope or stop. The records stay in your system, so a stop costs you nothing in history.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will an outside desk know our products well enough to answer dealers?
Only as far as your documents and your approved answer sheet go. The desk answers what is written down, and a technical question on a rating, a standard or a site condition goes to your engineer rather than being improvised.
Can the desk offer a dealer a better rate to close an order?
No. Discounts, scheme exceptions and credit terms are your decisions. The desk drafts from the approved price list and scheme sheet, and sends anything outside them to the person you name.
Whose phone number and records does the dealer see?
The dealer deals with your brand, and the log sits in your own system under your own login. If you end the arrangement, the records, the answer sheet and the scope document stay with you.
Will the desk answer in our name or its own?
It answers as your support desk, using the channels and numbers you have agreed, and it says so plainly. Dealers are told in advance, in a note from you. The desk never claims to be a member of your sales staff, and it never makes a promise outside the scope document you signed.
Can the desk take orders from dealers?
It can note an order request and pass it to your order desk in the form you prefer. It does not confirm price, credit or stock beyond what the documents show. Confirmation comes from your own staff, so a dealer is never told an order is booked when only a request was logged.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.