Skip to content
GullySales

Electroplating companies · CRM

Keep every enquiry, trial lot and repeat order in one record you can search.

A CRM for a plating house is a shared record of buyers, specifications, quotations, trial lots and approvals so that nothing depends on one person's memory. GullySales sets up a simple system, using a tool such as Zoho CRM or a structured sheet, around how your plant sells.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A quality inspector examines plated metal components

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For electroplating companies

Where it usually goes wrong, and what we would do.

  • “A specification belongs with the buyer, not in a drawer”

    The buyer sent a drawing, a coating requirement and a test method. If these sit in an email thread, the next person quoting for that buyer starts from nothing. Attach them to the account so the history travels with it.

  • “A trial lot needs its own record”

    A trial lot has a sample quantity, a specification, results sent and a decision pending. When it lives in a notebook, it is forgotten the moment the plant gets busy. A record with a status and a next step keeps it moving to a decision.

  • “One buyer, several plants and several people”

    A large customer may have a quality person at one site and a purchase person at another. A flat list of phone numbers hides this. Link people to the company and the plant so you know who to approach for what.

  • “Software is wasted if the floor will not use it”

    If the sales person must type at a desk after a long day, the record will be empty. Keep fields few, make them match the words your team uses, and let the phone or WhatsApp do the capturing where possible.

What we do

What we deliver for electroplating companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Fields that match plating work

    Finish, thickness range, part type, quantity, test method and drawing reference as standard fields on every enquiry.

    Result: A record holds what a quote needs.

  2. Pipeline stages for plating

    Stages such as enquiry, specification received, quote sent, trial lot, approved and repeat order.

    Result: You can see where every buyer stands.

  3. Trial lot register

    A view that lists every trial lot with its status and the next action.

    Result: No trial lot is left without a decision.

  4. Account and people linking

    Companies, plants and contacts connected so that roles are clear.

    Result: You know who decides and who influences.

  5. Import of existing contacts

    Customer and enquiry data moved from sheets and phones into the chosen system.

    Result: Your history is searchable from the first day of use.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

What a plating house should record for each buyer, part and lot.

Buyer, plant and contact role
Entered by whoever takes the first call. It separates the quality head from the purchase contact in the same plant, so the right person gets the right message.
Part number, base metal and drawing revision
Taken from the drawing by the estimator. It stops a repeat lot being run to an old revision.
Coating specification and thickness
Entered by the process owner. It lets the unit find every part that uses a given bath when a chemistry issue arises.
Trial lot status and result
Updated by the supervisor and the quality lead. It shows which buyers are waiting on a verdict and which trial ended in a yes.
Test records attached
Thickness and salt-spray reports linked to the lot by the lab. A buyer asking about last year's lot gets it from the record.
Rejection reason and corrective action
Written by the quality lead. It records what failed and what changed, and the next call opens with the fix.

Who it is for

This is written for these electroplating companies.

  • Zinc and zinc-nickel plating for fasteners and automotive parts
  • Decorative and hard chrome plating
  • Nickel plating for engineering and electrical components
  • Copper and tin plating for electrical and electronics parts
  • Barrel plating for small parts
  • Rack plating for larger components
  • Plating on aluminium and castings
  • In-house plating units that accept outside work

Before you decide

When this may not be the right fit.

  • The floor will not use any system and the supervisor keeps all details in a diary, so a record would hold only the office's guesses
  • You have not decided who is responsible for updating it, and a record without an owner empties within a few entries

Before you decide

Agree the work. Know how to judge it.

CRM for electroplating companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electroplating companies. Anything missing is noted in the written scope, with who will supply it.

The folder of open quotations
Bring the quotations still awaiting an answer, in paper or mail form. They are the first records. Without them, the system opens empty and the team has no reason to use it. Include quotations that went out by mail and by chat, not only the paper ones, because the folder you imagine is rarely the whole set.
Contacts from the owner's and sales phones
Export or list the plant contacts from the phones and the mail. Several people at one plant should be linked. If contacts stay on the phones, the history of a buyer is lost when a person leaves. Add job titles where you know them, since a quality head and a purchase engineer at one plant need different messages.
A decision on who updates after a trial lot
Say who enters the result of a trial lot: the quality person, the supervisor or the office. Only the owner can decide. Without a name, the record lags the floor and follow-up calls are based on guesses.
Your budget for the tool
Say whether you will pay for software or want a free tool. The decision shapes the setup. If unspoken, we recommend a sheet first, and we mention when it stops being enough. A rough figure is enough, with the number of people who will use the tool, because per-user cost decides whether a paid tool is sensible.
Specification documents you hold for each buyer
Collect the specification sheets, drawings and approval letters you hold, even if scattered. We link them to the buyer. Without them, a record shows a name and no requirements.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace a trial lot from enquiry to approval

    We follow one recent trial lot through every paper: the enquiry, specification, quotation, the lot, inspection and the buyer's approval. You tell us where information was lost. The journey decides the fields, and the number of live quotations held only in memory is counted. We also photograph the papers that travel with the lot, so that the record can point to them and the office does not hunt through folders.

  2. 2

    Decide the stages of a plating sale

    We set the stages of the pipeline, such as specification received, quoted, trial lot running, trial lot reported, approved, repeat. You and the quality person agree what moves a record from one to the next. Stages that cannot be defined are removed.

  3. 3

    Choose the tool the office will actually use

    We compare a spreadsheet with a tool like Zoho CRM against your office habits and cost. You decide. A simple tool that is filled beats a clever one that is not, and the choice is written down so it is not reopened every few weeks. We also list who in the office will touch the tool, and how many of them are comfortable with a screen, because that fixes how simple it must be.

  4. 4

    Set the fields for specification and trial lot

    We add fields for the specification, base metal, thickness, test needed, quantity, lot status and approval date, and link people to their plant. You test them on three live accounts. Fields nobody can fill are cut. We add a field for the standard the buyer quotes, since the same finish may be tested differently for two customers.

  5. 5

    Import contacts and quotations from the folders

    We load contacts from your phones and mail and the open quotations from your folders, merging duplicates with your help. You say which accounts are live. We start with a clean small set and add the rest after the team has used it.

  6. 6

    Run a trial lot through the record

    We put a real trial lot through the system with the supervisor and sales person and note every workaround. After it, we count the open quotations with an owner and a next step against the number held in memory at the start, and you decide what to adjust.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not necessarily. A well-built sheet can serve a small plant. Move to a tool such as Zoho CRM when several people need to share one view.
Who keeps the CRM updated?
Whoever speaks to the buyer. Keep the number of fields low and review the register in your sales meeting so the habit holds.
Must a plater buy paid software to start?
No. A shared sheet with the fields above is enough while the process is being agreed. Paid software helps once several people share it and you need reminders. The habit of entering every lot matters first, and no tool supplies that habit.
Who should update the record after a trial lot?
The person who ran the lot enters the result, and the quality lead attaches the report. Splitting it this way keeps the entry accurate, since each fact comes from the person who holds it. One owner then checks that nothing is missing.
What happens to quotations that are only in the notebook?
They are entered once, by you or the office, as the opening set of records, and the notebook then stops being the master copy. We help with the first batch and mark which quotations are live. Old closed ones are entered only if they help show a buyer's history, so the work stays small.
Can the record show which buyers have approved our work?
Yes, through the approval stage and a date on the trial lot. A simple view lists approved buyers with the last lot date, so the office can see who has gone quiet. The record shows only what is entered, so the quality person's report on each trial lot must reach it for the view to be right.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.