Skip to content
GullySales

Electroplating companies · Follow up systems

Stop quotations and trial lots from going quiet after the first reply.

A follow-up system for a plating house is the set of reminders, messages and owners that keep a quotation or trial lot moving until the buyer decides. GullySales builds this around your enquiry stages and the people who handle them.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A quality inspector examines plated metal components

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For electroplating companies

Where it usually goes wrong, and what we would do.

  • “The quotation goes out and silence follows”

    A plater sends a rate for zinc plating and waits. The buyer is busy with other suppliers and a production plan. A reminder that restates the finish, the lot and the next step brings the quote back to the top of the buyer's list.

  • “A trial lot result is a reason to call”

    When thickness and test records are ready, that is a natural moment to contact the engineer. Sent with a request for feedback, the records start the approval discussion rather than waiting for the buyer to ask.

  • “Approved customers drift away without contact”

    After a trial lot is approved and lots begin, attention moves to the next enquiry. A check on delivery, packing and any concern, made by a named person, keeps the relationship healthy and catches problems before they become rejections.

  • “A lost quote still teaches”

    When a buyer chooses another plater, the reason is useful. Ask politely and record the answer. Over time the pattern shows whether you lose on rate, delivery, finish range or lack of proof.

What we do

What we deliver for electroplating companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up steps for each stage

    A written next action and owner for every stage from quotation to repeat order.

    Result: Everyone knows the next move on any enquiry.

  2. Message templates

    Short, polite messages for quote reminders, trial lot results and delivery checks, in your own voice.

    Result: Follow-up needs no new drafting each time.

  3. Reminder routine

    Reminders in your CRM or sheet that surface the enquiries needing a call.

    Result: No quotation depends on remembering.

  4. Lost-quote note

    A short field and a polite question asked of buyers who choose elsewhere.

    Result: You learn why work goes to others.

  5. Approved-customer check

    A scheduled contact with each approved buyer, owned by a named person.

    Result: Problems reach you before the customer's inspection finds them.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments in a plating quote and trial lot that need a follow-up.

Quotation sent
Record the rate basis and the validity, and the date of the next call. A quote without a date set for the follow-up is the one that goes quiet.
Trial lot dispatched
Send the lot details and ask who will test it at the buyer's end. A named person at the buyer means there is someone to ask for the result.
Trial result received
Log accepted, rejected or reworked, with the reason. An accepted result is a reason to call about a standing order.
Approved supplier, gone quiet
A buyer who approved the unit and has sent no lot since is a reason for a call. Ask whether the line has a problem or the work moved.
Lost quotation
Write why it was lost, whether on price, lead time or a specification. The note shapes the next quote to that buyer.
Rejection raised by the buyer
Record the fault, the lot and the date the unit replied. A reply made before the buyer chases keeps the relationship alive.

Who it is for

This is written for these electroplating companies.

  • Zinc and zinc-nickel plating for fasteners and automotive parts
  • Decorative and hard chrome plating
  • Nickel plating for engineering and electrical components
  • Copper and tin plating for electrical and electronics parts
  • Barrel plating for small parts
  • Rack plating for larger components
  • Plating on aluminium and castings
  • In-house plating units that accept outside work

Before you decide

When this may not be the right fit.

  • Nobody holds the quote file, and reminders would reach a person who cannot answer the buyer
  • The unit cannot meet a promised date for a trial lot, so every follow-up would repeat a delay

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for electroplating companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electroplating companies. Anything missing is noted in the written scope, with who will supply it.

The list of quotations still open
Every quotation with no answer yet, the buyer and date. A folder is enough. Without it, we cannot test the routine on live work, and it is built on assumption. Add the date each was sent and the person who received it, so the first reminders can say something specific about the quote.
The trial lots now running
Names and status of lots currently in the plant or awaiting a buyer's report. Without it, the best follow-up moment goes unrecorded. Include the stage each lot has reached and the next test date, so a reminder points to an event and not to a general wish to catch up.
Your last few lost quotations with reasons
What buyers said when they chose another plater. Notes from memory are acceptable. Without them, the lost-quote note starts blank, and the first months teach you less. Where you remember the reason, write it down, because the reasons buyers give for choosing another plater decide which message you write next.
A list of approved customers and their last lot
Names of buyers who approved your work and the date of their last lot. These are the ones who drift. Without them, the approved-customer check has no list to run on. Add the person at the plant who places the order, as the quality head who approved you and the clerk who orders are not always the same.
A person who owns the reminder routine
One person who reads the reminders and chases the owner of each. The sales person or the office head. If unnamed, the reminders appear on a screen nobody looks at. Give that person authority to ask the owner about a quote that has stood still, since a reminder sheet without authority behind it becomes an ornament.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Chart where your quotations stopped moving

    We list recent quotations and mark where each stopped: after the quote, after the trial lot, after the approval. You tell us what was done then. The count of quotations with no second contact is the figure we read against later. We note which quotations were sent by mail, which by chat and which by hand, since a quote delivered by hand is followed differently.

  2. 2

    Decide what each stage means and who acts

    We agree the stages from quotation to repeat lot and who acts at each. You choose the person for each. A stage with no actor is the point where silence falls, so the list is not accepted until every stage has a name. We write who steps in when that person is absent, since a stage with one possible actor fails on the first day of leave.

  3. 3

    Write messages for each stage in plain words

    We write the quotation nudge, the trial lot report, the approval note and the check-in with an approved customer. Your engineer reads each aloud. A message that sounds like a brochure is rewritten in the words the engineer would use. We keep each message short enough to read on a phone at the gate, and each ends with a single question the buyer can answer.

  4. 4

    Set the reminder routine on the record

    We place a next step and owner on each open quotation and trial lot, with a reminder that appears for that owner. You decide who sees what. The routine is tested on open quotations before it goes to the team.

  5. 5

    Write a note for each lost quotation

    We add a simple note after every lost quotation: the reason the buyer gave, the competitor named and what you would change. You review the notes together. A lost quote that teaches nothing is wasted. The notes are read together at a sitting you set, so that the reasons build into a view of why buyers choose elsewhere.

  6. 6

    Compare follow-ups and approvals with the start

    We count quotations that had a second contact, trial lots reported on the same day and approved buyers who were checked on, against the starting figures. You decide which messages to keep and which stages to simplify.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When should we follow up on a quotation?
Follow the buyer's own pace. Ask in the first reply when they expect to decide, and contact them around that point. Do not press beyond a polite reminder.
Is it right to chase a buyer who has gone silent?
Yes, politely and with something useful, such as test records or an offer of a visit. If there is still no reply, close the record and note it.
When should we follow up on a quotation?
When the buyer has had time to compare it, and when the quote nears its validity. Ask whether the specification is clear and whether another plater is involved. Set the next date at the moment you send the quote, so it is never left to memory.
Is it right to chase a buyer who has gone silent?
Yes, once or twice, in a short note offering to close the quote. A purchase engineer may be waiting on a design or a budget. A courteous note keeps you the first name when the work returns, and the pushing stops there.
Who writes the message when the quality person is away?
The sales person or office head sends a message from the saved set, and the technical detail waits for the quality person's return, with the buyer told so. We write the messages so that each has a part that needs no technical judgement. A named stand-in for each stage avoids the silence that follows when the one person is on leave.
What do we send when a buyer rejects a trial lot?
Send a short message that names the lot, states what the buyer found, says what you will check and tells them who will call. Attach the relevant record. Do not argue by message. The call that follows should listen first. We write the model message and a rule on who approves it before it goes.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.