Skip to content
GullySales

Heavy equipment and forklift dealers · Pay per click advertising

Buy the breakdown call and the part number, not the model browser.

Paid search for an equipment dealership works on the searches with a buyer behind them: a part number, a machine that will not start, a rental, a forklift service call. GullySales runs those campaigns, cuts out the manual and jobs traffic with negatives, and reports cost per quote rather than cost per click.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of heavy equipment and forklift dealers at work in the United States

What pay per click advertising means

Pay per click advertising (PPC) is paying a fee each time someone clicks your advert on Google or another platform. It puts you at the top of a search page immediately, instead of waiting for ranking to build. GullySales sets the targeting, writes the ad text and checks spend against enquiries received.

Last updated 14 Nov 2026.

For heavy equipment and forklift dealers

Where it usually goes wrong, and what we would do.

  • “A model number search is mostly not a buyer”

    Put a model into Google and back comes an operator after a manual, a student after a spec sheet and somebody pricing a scale model. Paying for all three empties a budget fast.

  • “The machine-down search closes in minutes”

    A contractor whose loader will not start searches the brand and the word repair, then calls the first two numbers on the page. That click is worth more than any inventory click.

  • “Year-end finance searches rise on their own”

    Contractors doing the sums before 31 December search deduction and financing wording. A page that explains Section 179 in general terms and sends them to their accountant converts that traffic.

What we do

What we deliver for heavy equipment and forklift dealers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Campaigns split by intent, not by machine

    Separate budgets for parts, shop and field service, rental, and the few machine categories worth bidding on, each with its own landing page.

    Result: Spend goes where a call follows, not where the volume is.

  2. A negative keyword list drawn from this trade

    Manual, spec sheet, salary, hiring, scale model, parts diagram, for sale by owner and the auction sites, loaded before the campaign runs and reviewed against the search terms report.

    Result: You stop paying for readers and job hunters.

  3. Ad schedule matched to who is answering

    Ads running in the hours a person picks up, with agreed overlap hours when our team takes the call-back and books it into your system.

    Result: A paid call turns into a work order instead of a voicemail.

  4. Landing pages for parts and service

    A page that names the brands serviced, the shop bays, the field service radius and a phone number, instead of dropping a breakdown call on the homepage.

    Result: The call happens on the first screen.

  5. A fourth quarter finance campaign

    Search and email aimed at buyers deciding before year end, with the deduction explained in general terms and the reader told to confirm it with their own accountant.

    Result: Machines move in the weeks buyers are already deciding.

  6. Cost per quote and per parts order reported

    Every call and form tracked through to a quote, a work order or a parts sale, priced by campaign against the baseline recorded before work starts.

    Result: You can name the campaign that paid for a machine.

How the result is measured

  • Cost per click
  • Cost per enquiry
  • Enquiries from paid search

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches to bid on and block

The searches worth paying for at an equipment dealer, and the ones to keep out.

Machine plus use, such as 3 tonne diesel forklift for a warehouse
Bid. The buyer has a capacity and a use. Give each machine type its own ad group, and say whether you sell, rent or both.
Used or second hand excavator and forklift searches
Bid, for stock you actually hold. These buyers compare hours and price. Show real photographs and the hours, and take the listing down when it is sold.
Spare part number and machine breakdown searches
Bid, always on, with a call button in service hours. These callers are owners with a machine down, and they remember who answered.
Operator job, training, manual, toy and driver licence searches
Block. Forklift operator job, excavator training, service manual PDF and toy excavator bring nobody who buys. Add them as negatives and read search terms.
Where the click lands
Send machine searches to a page for that machine with its capacity, hours and a quote form. Send part and breakdown searches to a call button and a form asking the make and model.
Counting a real enquiry
Count a quote request with a machine, a call about a part with a model, or a service call from a customer in your area. Log which became a quotation and which an order.

Who it is for

This is written for these heavy equipment and forklift dealers.

  • Full-line construction equipment dealers for a single manufacturer
  • Independent used equipment dealers and brokers
  • Forklift and material handling dealers running a service fleet
  • Compact tractor and agricultural equipment dealers
  • Crane, telehandler and aerial lift specialists
  • Attachment, tyre and wear parts suppliers
  • Dealers running a rental fleet alongside sales
  • Single-location dealers competing with a multi-state group

Before you decide

When this may not be the right fit.

  • Machine-down calls reach a voicemail box after hours, so a paid click on a breakdown search would be bought and lost.
  • You have not read what your co-op fund or manufacturer will reimburse, and paid spend could fall outside it.
  • No one owns the tracked phone line, so calls from ads could not be told from calls that came any other way.

Before you decide

Agree the work. Know how to judge it.

PPC ads for heavy equipment dealers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring search-term reports, conversion definitions, and the sales outcome of past enquiries where available. Identify products, locations, and enquiries you cannot serve.

Make the scope clear

Choose the offer and landing page before setting a media budget. Agree who pays the platform, which actions count as conversions, and how unsuitable searches will be reviewed.

Check the work in use

Trace a test enquiry from the advert to the sales record. Review qualified enquiries and orders alongside spend, and separate duplicates or spam from genuine buyer demand.

Know when to change course

If the advert generates enquiries that do not fit, revise targeting and qualification before increasing spend. If suitable enquiries are lost after contact, work on the sales process.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from heavy equipment and forklift dealers. Anything missing is noted in the written scope, with who will supply it.

Ad account access, or a decision to open one
If the dealership has run ads before, we need administrator access to read what was bought. If the account belongs to a former agency, ask for it to be transferred. When none exists, we open a new one in the dealership's name and start without history, which makes the first reading cautious.
A call log from the service desk
A week of marked-up calls from the service desk, noting which were breakdowns, parts, rental or wrong numbers, tells us what a paid call is worth. Rough tick marks on paper are acceptable. Without them we budget each call type on guesses and the machine-down campaign is the one likeliest to be mis-sized.
The parts and service capacity figure
We need to know the number of field calls the technicians can take and which counties the trucks reach. A short honest figure from the service manager is enough. If it is missing, we may send more breakdown calls than the shop can answer, which costs money and leaves a contractor with a poor first impression.
Finance partner terms in writing
Any finance or exchange offer in an ad needs the lender's current wording and your approval of it. A one-page note from the finance contact works. Without it, finance ads are held back until the wording is settled, and the year-end campaign is built on service and parts alone.
Your list of brands you will not advertise
Some brands are restricted by your agreement, and some you simply do not want calls for. Write them down, even as a short list in an email. We use it to build exclusions at the start, rather than discovering the problem through an expensive click from the wrong buyer.

How it works

How the pay per click advertising work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort last year's search terms by buyer

    We begin with whatever search term reports and call records exist, and mark each query as a buyer, a repair emergency, a parts order or a job seeker. You tell us which of those you can actually serve from your yard and your trucks. That separation becomes the shape of the campaigns, and it shows which spend has been landing on people who cannot buy.

  2. 2

    Agree who answers the phone and when

    Paid search that rings through to an empty counter wastes the click. We sit with the parts manager and the service desk to settle who takes each call type, which hours the lines are staffed, and where after-hours calls go. You decide which ad windows are worth running; we set the schedule to match the people.

  3. 3

    Set up counting before the first ad runs

    We install call tracking per store, tag the parts and service request forms and agree what counts as a quote request, a parts order and a machine-down call. You confirm the definitions with whoever raises quotes, since the dealer system's records are what we compare against. The campaign launches only once each of those events can be told apart.

  4. 4

    Build the negative list from your own trade

    Manuals, operator jobs, salvage yards, toy models and rival brands you do not carry are blocked by name, using the words contractors and job seekers actually type. You read the list and strike anything you would still take a call about. It then grows from the search terms that come in, rather than staying a generic list.

  5. 5

    Launch parts and service first, finance second

    Campaigns for part numbers, machine-down service and rental go live ahead of finance and year-end offers, because their buyers are closest to ordering. We check the landing pages on a phone with the service manager and fix the form fields that a contractor in a cab would skip. You approve each ad's wording before it is shown.

  6. 6

    Compare spend with quotes and parts orders

    At review we set the money spent against the quotes raised, parts orders placed and service calls booked, all taken from your own records rather than the ad platform's. The sales manager marks which enquiries were real buyers. From that comparison you choose which campaigns to widen, which to pause and where the budget moves.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we advertise our used inventory on Google?
Rarely worth it. The marketplaces already reach that buyer and you pay for that buyer twice. Put the money into parts, service and rental, where fewer dealers bid and the phone rings the same day.
How do we stop paying for people looking for manuals?
With a negative list written for this trade and kept up. Manual, PDF, spec sheet, salary, toy and parts diagram go in before anything runs. Then the search terms report gets read and new ones are added.
Should we advertise finance and exchange offers?
Yes, in a campaign for those searches, if you handle them. Say which finance partners you work with and that terms depend on the buyer, and check what you may state about rates. Ask for the make and use on the form.
Do we need a separate campaign for rental?
If you rent as well as sell, yes. Rental clicks are for a different buyer, with a shorter wait. Keep a separate ad group, page and phone number so you can read each.
Will you run ads in our manufacturer's name?
Only as far as your dealer agreement allows. Some agreements restrict how a maker's brand name appears in search ads, and some require approved wording or co-op funding rules. We ask for the relevant clauses before building anything, write the ads around your own dealership name and the services you offer, and show you each advertisement before it runs. If the maker has a co-op programme that pays towards approved advertising, we prepare ads in its format so you can claim. Where a rule is unclear, we ask your dealer manager rather than guess, and check the platform's current rules on trademarks in ad text at the same time. Nothing is published that you or the manufacturer's representative has not seen.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.