Skip to content
GullySales

Medical device manufacturers · Cold calling

Call the biomedical engineer before the specification is written.

Outbound prospecting for a medical device manufacturer is a planned approach to hospitals, clinics and distributors that have not enquired, starting with a call to the person who checks or specifies equipment. GullySales builds the account list, writes the call and message sequence, and records every response so your team knows who is interested and why.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of medical device manufacturers at work in India

What cold calling means

Cold calling is phoning someone who has not enquired, to introduce your business and check if there is a need worth a further conversation. GullySales writes the opening lines and qualification questions for these calls and tracks how many turn into a genuine enquiry.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For medical device manufacturers

Where it usually goes wrong, and what we would do.

  • “The buyer is three people, not one”

    A hospital purchase involves a clinician who wants performance, a biomedical engineer who reads the specification and a procurement officer who compares terms. A call that reaches only one of them stalls quietly. Outbound work for a device maker starts by deciding which role each first call is meant to reach, what that person needs to hear, and who inside your team follows up with the other two once one of them shows interest.

  • “A cold call cannot carry clinical claims”

    Your sales caller is not a clinician, and a phone call leaves no record of exactly what was said. A caller who drifts into what the device will do for a patient creates a problem for you and for the hospital. The script has to stay with the device, its registration status, its specification and how to see it demonstrated, and everything clinical goes to a person qualified to discuss it.

  • “Gatekeepers protect the people you want”

    Receptionists, department secretaries and purchase clerks decide whether a call reaches the biomedical team at all. Treating them as an obstacle ends the conversation, while a plain, honest reason for the call and an easy way to send documents sometimes gets a name and a better time to ring. The call plan therefore includes what to say to the person who answers, not only to the person you hoped to reach.

  • “Demonstration units are scarce”

    A demonstration needs a unit, a technician and a day away from other work, so a call that wins a demonstration request it cannot fulfil does damage. Outbound activity has to match the number of demonstrations your team can actually run. The plan sets how many accounts are approached at once, and which prospects are offered a visit, a video walk-through or a document pack first.

What we do

What we deliver for medical device manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Account criteria by device and buyer

    A written description of the hospitals, clinics, laboratories and distributors worth approaching for each device you make, with the departments that use it and the exclusions, such as facilities you cannot service. Your sales head checks it against recent orders and lost tenders before any list is built.

    Result: You can read why each type of facility is on the list, or off it.

  2. Checked contact list with named roles

    Named facilities drawn from your own records, exhibition visitor lists and public directories, each with the biomedical, department and purchasing roles marked. Details that were checked are separated from those still assumed, so your caller does not pretend to know a name that nobody confirmed.

    Result: Every contact shows whether it was confirmed or still needs checking.

  3. Call openings for each role

    Separate opening lines and short questions for a biomedical engineer, a department head, a purchase officer and a distributor. Each states who is calling, what the device is for in plain terms, and what the caller would like to send. Your regulatory lead approves every statement about registration and certification.

    Result: Each statement about the device matches a document you hold.

  4. Sequence of calls, messages and documents

    An ordered plan showing when to call, when to send a short specification sheet or registration summary, and when to stop. A refusal ends contact. The plan names the channels you may use and the hours that suit a hospital, and your adviser checks the contact rules before the first call.

    Result: Your team can see the next step for any account and the point where contact stops.

  5. Call record and handover sheet

    A shared sheet or CRM view records every attempt, the person reached, what they asked for and who in your team owns the next action. A request for a demonstration, a quotation or a visit goes to a named person with the call notes attached.

    Result: You can check that every interested reply reached a named owner.

  6. Response review against sales outcomes

    A comparison of calls made, conversations started, demonstrations requested and orders or tenders that followed, set against the figures recorded before the work began. It shows which opening and which type of facility started useful conversations, rather than rewarding the number of calls dialled.

    Result: You can see which message started conversations that reached a purchase discussion.

How the result is measured

  • Calls made
  • Conversion to genuine enquiry
  • Call to meeting ratio

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these medical device manufacturers.

  • Diagnostic equipment manufacturers
  • Surgical instrument manufacturers
  • Hospital furniture and equipment makers
  • Disposable and consumable device manufacturers
  • Implant and orthopaedic device makers
  • Home healthcare device manufacturers
  • In-vitro diagnostic kit manufacturers
  • Export-focused medical device units

Before you decide

Agree the work. Know how to judge it.

Outbound sales prospecting for medical device manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from medical device manufacturers. Anything missing is noted in the written scope, with who will supply it.

Device specification sheets
A caller can only describe a device accurately from an approved sheet. We need the current version for each device in scope, including intended use as stated in your documents. If a sheet is out of date, the caller repeats the old statement and a biomedical engineer notices.
Registration and certification papers
A hospital checks your registration and quality certificate early, so the call plan needs the real documents, with the dates they cover. Your regulatory lead signs off what may be said. Without them, we cannot write a line about approval and the caller will have nothing to send.
Past orders and lost tenders
Lists of facilities that bought, and those that chose another maker, show which buyers suit the device. We use them to set the account criteria. Without them, the target list rests on guesswork and the first calls go to facilities that were never likely to buy.
Demonstration and service capacity
We need to know how many units you can place for demonstration and which areas your service engineers cover. This sets how many accounts we approach at once. If it is missing, a successful call produces a visit request that your team cannot honour.
A named person for replies
Someone in your team must own every interested reply, with the authority to book a demonstration or send a quotation. Prospects who answer and then wait go to another maker. We record who that person is and what they can promise before any call is made.

How it works

How the cold calling work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Device and buyer brief

    We start with your requirements brief and a conversation about the device range, the facilities that already buy, and those that never have. You decide which device and which buyer role the first round of calls will concentrate on, and we record the order figures that the later review will be read against.

  2. 2

    Facility list and role check

    We build the list from your own records and agreed public sources, then mark the biomedical, clinical and purchasing roles at each facility. Your sales head reviews exclusions, such as areas your service team cannot reach, and removes accounts that are already in a live tender or an active conversation with your distributor.

  3. 3

    Script and registration sign-off

    We write the openings, the answers to common questions and the replies to a refusal or a request to call later. Your regulatory lead approves each statement about registration, certification and intended use, and your adviser reviews applicable contact rules. Nothing is dialled until both have signed off.

  4. 4

    Demonstration capacity agreement

    Before the first call, you tell us how many demonstrations, video walk-throughs and document requests your team can handle at the same time. We set the number of accounts approached against that capacity, so a good response never becomes a promise your service or sales team cannot keep.

  5. 5

    Small first round of calls

    The agreed caller, from your team or ours, works a small part of the list. We listen to the actual conversations or read the notes with you, correct wording that confuses a gatekeeper, and decide whether the sequence should continue, change its order or stop for that type of facility.

  6. 6

    Handover and reading against the record

    Interested facilities pass to the named salesperson with the call record. After the agreed period, we read calls, conversations, demonstrations and orders against the figures recorded at the start, and you decide which facility types and openings continue and which are dropped.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Can a medical device manufacturer cold call hospitals at all?
Yes, as a sales approach, but the contact rules differ by country, by channel and by whether the facility is public or private. Your own adviser must check them before calling starts. GullySales writes the plan around those rules, keeps the script to the device and your documents, and stops contact when a facility refuses.
Who should the first call reach, the doctor or the biomedical engineer?
It depends on the device. A technical product that needs checking against a specification starts with the biomedical engineer, while a device chosen by clinical preference may start with the department head. We decide that with you during the brief, then keep a second route ready for the other role.
What can a caller say about what the device does?
A caller may describe the device, its intended use as written in your approved documents and its registration status. A caller should not describe outcomes for patients, compare clinical results or answer a clinical question. Those go to a qualified person in your company, and the script says so plainly instead of improvising.
Will you use our own sales team or make the calls yourselves?
Either arrangement works, and it is written into the scope before work starts. Some owners want GullySales to place the first calls and hand over interested accounts, while others want their own team trained on the sequence. In both cases the same record sheet shows who spoke to whom.
How do we avoid promising demonstrations we cannot give?
We set the number of accounts approached against the demonstrations, video walk-throughs and document requests your team can handle at the same time. If replies exceed that, the list pauses. Prospects who cannot be seen immediately receive a document pack and an honest date instead of a vague promise.
How will we know the calls are working?
We read calls made, conversations started, demonstrations requested and orders or tenders that followed against the figures recorded before the work began. A raised number of calls proves nothing. The review shows which opening and which type of facility led to a real purchase discussion, and which to drop.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.