Skip to content
GullySales

Tool and die manufacturers · CRM

Keep every drawing, quote, try-out and tool owner in one record the whole shop can read.

A CRM for a tool room records each enquiry, the drawing received, the quote sent, the try-out outcome and the tool's later maintenance. GullySales sets up the fields, the stages and the habit of updating them so that no quote or old tool is forgotten.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For tool and die manufacturers

Where it usually goes wrong, and what we would do.

  • “A tool order runs through nine stages”

    Enquiry, drawing review, design, quote, order, build, try-out, sample approval and handover. If each lives in a different notebook, no one knows where a job stands when the buyer calls.

  • “Tools outlive the people who ordered them”

    A die runs for years. By the time it needs repair, the original buyer may have moved. A register of every tool, its press and its owner lets the tool room reach the right person.

  • “Quote follow-up slips under shop-floor pressure”

    The owner is on the floor and the quote waits. A buyer with no reply asks another tool room. A record that shows quotes sent and not answered turns follow-up into a daily list.

  • “Reasons for loss are rarely written down”

    When a quote is lost on steel choice or a try-out date, that knowledge disappears. Recording the reason shows patterns that change how the next quote is built.

What we do

What we deliver for tool and die manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stages that match your job flow

    A pipeline from enquiry to handover, using the words your team already uses.

    Result: Anyone can see where each tool stands.

  2. A tool register

    A record for every tool built, with part number, press, owner, date handed over and maintenance history.

    Result: Each old tool has a name against it.

  3. Required fields for a quote

    Material, thickness, yearly quantity, press tonnage and try-out press recorded before a quote leaves.

    Result: Quotes are never sent on missing detail.

  4. A daily follow-up list

    A simple view of quotes awaiting a reply and tools due a service call.

    Result: The owner starts the day with names to call.

  5. A loss-reason field

    A short list of reasons for lost quotes, filled in when a job closes.

    Result: Patterns show in what you lose.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields a tool room keeps on each drawing, quote, tool and owner.

Part number and drawing revision
Entered by the estimator on intake. It lets the shop find the tool again when the buyer returns with a revision, without searching through old mail.
Tool type, die steel and press used
Filled in by the tool designer after design freeze. It lets the shop quote repairs and a repeat tool by looking it up.
Try-out status and issues recorded
Filled in by the tooling head after each try-out, with what was changed. It stops the same defect being argued about again at the next tool.
Tool owner and storage location
Whether the tool belongs to the shop or the buyer and where it sits. It settles who pays for storage and repair.
Reason for a lost quote
Filled in by the salesperson in the buyer's words where the buyer says them. It lets the owner see whether the shop loses on price, time or fit.

Who it is for

This is written for these tool and die manufacturers.

  • Progressive die makers for brackets, clips and terminals
  • Draw and form die makers for deep drawn covers and housings
  • Blanking and piercing tool makers for laminations
  • Auto press tool rooms supplying Tier-1 and Tier-2 stampers
  • Appliance and white goods tool rooms
  • Jig, fixture and gauge makers within a general tool room
  • Tool rooms offering die maintenance and repair
  • Tool rooms with their own press line for try-outs and small lots

Before you decide

When this may not be the right fit.

  • Quotes sit in the estimator's own folder and nobody else may open them, so the record would be empty and ignored.
  • The shop builds a few tools a year for known buyers, and the owner already knows every job.

Before you decide

Agree the work. Know how to judge it.

CRM for tool and die manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from tool and die manufacturers. Anything missing is noted in the written scope, with who will supply it.

The files for one finished tool
Gather the drawing, emails, quote, order, try-out report and invoice for one tool. A scattered set is acceptable. It lets us see how a record is built today and which pieces are lost. Note any piece that exists only on a personal phone, since it must be added to the shop's own record.
A named owner for the record
One person must be responsible for the entries being kept up, normally the estimator or office manager. Without a name, the record decays within a few jobs and the owner returns to memory.
A list of tools in service
Tools delivered to customers and still running are the base for maintenance work. A list from the invoices is enough. Without it, the tool register starts empty and repair prompts never arrive. Include the year handed over and the customer's plant contact, so a repair call reaches the right engineer.
Rules on where drawings are stored
Decide whether drawings sit inside the CRM, on a shared drive or on the design computer, and who has access. We link to them rather than copy them if you prefer. Without a rule, drawings end up in three places. Customers differ on who may see their drawings, so tell us any customer with a stricter rule.
A computer at the estimator's desk
Entries must be possible where quotes are written. If the estimator works offline, we agree a fixed entry point at the end of the shift instead. Without it, the record trails the work.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one tool from enquiry to handover

    We take a recent tool and follow it through the files, emails and chats from the first drawing to the try-out report and invoice. You show us where each piece was kept. The trace reveals every stage a record has to cover and every place where it currently goes missing. The tool room head confirms the dates against the job card, so the trace reflects what happened and not what was planned.

  2. 2

    Name the stages as the shop floor says them

    With the estimator and tool room head, we set the stages in your own words: drawing received, design review, quote sent, order, steel cut, hardening, fitting, try-out, handover, maintenance. The CRM is built on them, so no one translates their work into software terms. Stages that nobody can name an owner for are merged with the one before.

  3. 3

    Build the tool register with its fields

    Each tool gets a record with the customer, part, tool type, press used, try-out date, sample approval and any repair history. The tool room head decides which fields are required at which stage. The register keeps the history after the person who ordered the tool has left. Press tonnage and die size are included because they decide whether the shop can take a repeat order for the same tool.

  4. 4

    Set the required fields on every quote

    A quote cannot be saved without the drawing reference, material, volume, press tonnage and launch date. The estimator tests this on three live enquiries. The rule stops a quote leaving with a gap that later turns into an argument. A field the estimator calls pointless is removed after the test, since a required field nobody trusts gets filled with rubbish.

  5. 5

    Load open quotes and tools in service

    We enter the quotes currently open and the tools delivered over the last few seasons, with you or the estimator checking each line. Older history is added when needed. A small and correct record is better than a long and doubtful one.

  6. 6

    Read the follow-up list and loss reasons

    We read the follow-up list the system produces and the reasons recorded for lost quotes, against the figures noted before the CRM began. You decide which stages are not used, which fields are skipped and what the owner's one-page view should show. The summary page lists quotes waiting on a reply, tools due for try-out and tools due for a check, each with a named person.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not at the start. A shared sheet with firm rules can hold the register. Move to a CRM tool when the number of live quotes outgrows the sheet.
Who updates the record?
Whoever speaks to the buyer. A rule that the record is updated before the call ends keeps it current, and the owner reviews it on a set day.
Can the CRM hold drawings?
Store a link to the drawing folder against the record. Keep confidentiality in mind, and restrict access to the people who need the files.
Can the record hold a customer's drawings safely?
Store them where only the designers and estimators can open the file, and note the customer's secrecy terms on the record. Drawings belong to the buyer, so remove them when the agreement says to, and keep a log of who opened them.
Is a shared spreadsheet enough to start with?
For a small tool room it can be, provided the stages and required fields are fixed first. A spreadsheet fails when several people edit it and nobody checks it, so we only advise it where one person owns the record. As the register of tools grows or a second estimator joins, a simple CRM becomes easier to keep right. We choose with you after seeing how many people enter data.
Who in the shop will actually update the record?
The person who sends the quote updates the quote stage, and the tool room head updates the build and try-out stages. We design the fields so each entry takes a short moment at the point of work, and the owner reads one summary page rather than entering anything. If an entry is regularly skipped, we remove the field or move it to a stage where someone is already at a screen.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.