Skip to content
GullySales

Tool and die manufacturers · Social media

Show a die being built and tried out, so owners see the work before asking.

Social media for a tool room means short posts of dies in progress, tried-out parts and the people who design and fit them, aimed at owners and tooling heads who scroll LinkedIn and watch engineering videos. GullySales plans the post types and the review step that keeps customer details private.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

Last updated 14 Nov 2026.

For tool and die manufacturers

Where it usually goes wrong, and what we would do.

  • “Process posts hold an engineer's attention”

    A strip layout beside the finished die and the stamped part tells a story in three images. Tooling engineers follow these because they show decisions, not slogans. A general post about quality gives them nothing to remember.

  • “Customer parts need permission”

    Some parts belong to an auto or appliance customer who has not agreed to be shown. A post that reveals a part number or shape costs trust. A review step before posting protects the relationship.

  • “The audience is small and specific”

    A tool room does not need a large following. It needs the stamping unit owners, tooling heads and sourcing engineers of its region to see the work. Following and tagging them matters more than reach.

  • “Try-out clips answer the biggest worry”

    The buyer cannot judge a die until it runs. A short clip of the press stroking a tool, with the part dropping clean, speaks to that worry when a brochure cannot.

What we do

What we deliver for tool and die manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A post plan by tool stage

    Posts keyed to design, machining, hardening, assembly and try-out, so one die gives a short series.

    Result: One tool builds a run of posts.

  2. A permission checklist

    A short sheet that records whether the customer agreed to show the part, the name or only the design view.

    Result: No post goes out without a recorded answer.

  3. Caption templates in engineering terms

    Captions that state tool type, part material, press tonnage and what was solved, written without slogans.

    Result: Captions read like a note between engineers.

  4. A LinkedIn profile for the tool room

    A company page and owner profile with the tool types, press facility and gallery arranged for a purchase engineer.

    Result: The profile answers a buyer's first check.

  5. A short video routine

    A simple way to capture try-out clips on a phone and label them with the part family.

    Result: Try-out footage is gathered as part of the job.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts and pieces to plan

The posts a tool room plans around the stages of a die build.

Wire-cut a die insert
A short clip of an insert being cut, with the machine and the steel named. It needs the operator's approval, and no part of a customer drawing may show.
Die fitted to the press for try-out
A post of the tool on the press bed on the day of try-out. It needs the buyer's agreement and the first strip photographed with the customer's part number hidden.
Strip layout explained
A diagram post showing how the strip feeds through stations, drawn fresh for the post and not copied from a job. The tool designer checks it for accuracy.
A broken punch and what caused it
A failure photograph with a plain account of cause and fix. It earns trust from toolmakers and needs the job record, with the customer left out.
The tool room team at work
A photograph of the designers and fitters with names the people agreed to. It tells a buyer that people stand behind the tool.

Who it is for

This is written for these tool and die manufacturers.

  • Progressive die makers for brackets, clips and terminals
  • Draw and form die makers for deep drawn covers and housings
  • Blanking and piercing tool makers for laminations
  • Auto press tool rooms supplying Tier-1 and Tier-2 stampers
  • Appliance and white goods tool rooms
  • Jig, fixture and gauge makers within a general tool room
  • Tool rooms offering die maintenance and repair
  • Tool rooms with their own press line for try-outs and small lots

Before you decide

When this may not be the right fit.

  • Every job is under a secrecy agreement and the owner will not allow any photograph, so the content would be empty.
  • You want likes from a general audience, and your buyers are a few hundred stamping units who do not look for tools there.

Before you decide

Agree the work. Know how to judge it.

Social media marketing for tool and die manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review the posts that produced useful conversations, not only the ones with the most views. Gather buyer questions and decide which team member can contribute credible material.

Make the scope clear

Choose the audience and channel before setting a posting volume. Agree who supplies material, approves posts, and handles messages, including complaints or questions the agency cannot answer.

Check the work in use

Follow a post through to the profile, website, and response. A useful report explains the quality of conversations and enquiries, alongside reach and engagement.

Know when to change course

If publishing takes time away from unanswered buyer messages, fix the response routine first. Do not expand to another channel without a clear reason for being there.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from tool and die manufacturers. Anything missing is noted in the written scope, with who will supply it.

Customer permission, in writing
For any part, plant or name to appear, you need the customer's agreement, even by email. Keep these in one folder. Without them we show only the tool room, its machines and people, which still works but proves less.
A phone and a person to film
Someone on the floor must be asked to take photographs and clips at set points, such as the first cut and the try-out. A modern phone is enough. If nobody is assigned, posts depend on the owner remembering, and the feed stops. Charge the phone before each visit to the floor.
Photographs of the machines and press
Clear pictures of the wire cut, the grinding machines and the try-out press give a tooling head something to judge. Include a note of what each does. A cluttered or dark photograph is replaced. Add a line on which machine each photograph shows, so captions stay accurate.
A decision on employees posting
Decide whether engineers and the die setter may post about their work, with what limits and who reviews it. We write a short guide from your answer. Without a rule, staff either post nothing or post something the customer will object to.
Access to the LinkedIn and video accounts
The company page and any video channel should sit in the owner's account, with us added as editors. Pages run from a former employee's login are recovered first. We cannot schedule or correct posts without access.

How it works

How the social media work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Walk the shop floor with a phone

    We tour the tool room with the head and a phone, noting what is worth showing: a die on the bench, a wire cut in progress, the try-out press, a strip of formed parts. You mark anything that shows a customer's part or a trade secret. The walk produces the first list of posts and the first list of exclusions.

  2. 2

    Draw up the permission list with the owner

    For each customer, the owner decides whether the part, the name or the plant may appear and in what form. We record these in a simple checklist that anyone posting must consult. Where a customer has not agreed, the post shows the process and not the part.

  3. 3

    Plan posts along the tool's stages

    A tool passes through design, steel cutting, machining, hardening, fitting and try-out. We plan one kind of post for each stage, so the feed reads as the story of building a die. The tool room head approves each stage's captions for technical accuracy.

  4. 4

    Set up the tool room's LinkedIn page

    We build the page with a plain description of the tool types, the press available for try-out and the contact for drawings. The owner and two engineers are connected to it. A tooling head who looks you up after a quote will see a page that matches the pitch.

  5. 5

    Film try-out with the die setter

    The die setter or fitter films a short clip of the try-out in the tool room's own press, showing the strip or part coming out. We add a caption in engineering terms. The clip answers the worry buyers raise first, which is whether the tool works before it leaves.

  6. 6

    Read the responses against the register

    We compare the comments, messages and profile visits from posts with the enquiries logged since the start. You decide which stages interested the right readers, which captions drew only students and whether the camera time is worth its cost to the shop floor.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which platform matters for a tool room?
LinkedIn reaches sourcing engineers and owners. YouTube suits longer try-out clips and design walk-throughs. Choose one first and keep it current instead of spreading thin.
Should we show our machines?
Show them in use on a specific tool, with the tool type in the caption. A photograph of a machine alone says what you own. A photograph of it cutting a die block says what you can build.
Can employees post about their work?
Yes, with a simple rule on what stays private. Designers and fitters posting about a tool they enjoyed building reach peers that a company page misses.
May we post a clip of a try-out at the customer's plant?
Only with the customer's consent given in writing. A customer's plant, press and part are their property and may be covered by secrecy terms. Post the clip from your own press line where you have one, or an unbranded trial piece.
How do we post about a customer's part without breaking confidentiality?
Show the process, not the part. A die in its shoe, a wire-cut profile with the dimensions out of frame, a strip of formed metal with the part number hidden, all tell a tooling head that the shop can do the work. Anything that identifies a customer's product waits for their written agreement. We review each post against your permission list before it goes out, and when in doubt the post stays unpublished.
Is LinkedIn enough, or should the tool room use other platforms?
LinkedIn is enough to begin with, since the readers are owners, tooling heads and purchase engineers who use it for work. A video channel helps where try-out clips run long and you want them to be found by search. Instagram and Facebook suit a tool room only when it also wants to recruit apprentices. We start with one platform and add another when the first has a steady rhythm.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.